netdev - Re: [PATCH] net/macb: add support for resetting PHY using GPIO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 10 Dec 2015 16:08:08 +0100
From:	Gregory CLEMENT <gregory.clement@...e-electrons.com>
To:	Sascha Hauer <s.hauer@...gutronix.de>
Cc:	"David S. Miller" <davem@...emloft.net>,
	linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
	Nicolas Ferre <nicolas.ferre@...el.com>,
	linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>
Subject: Re: [PATCH] net/macb: add support for resetting PHY using GPIO

Hi Sascha,
 
 On jeu., déc. 10 2015, Sascha Hauer <s.hauer@...gutronix.de> wrote:

> Hi Gregory,
>
> On Wed, Dec 09, 2015 at 06:49:43PM +0100, Gregory CLEMENT wrote:
>> With device tree it is no more possible to reset the PHY at board
>> level. Furthermore, doing in the driver allow to power down the PHY when
>> the network interface is no more used.
>> 
>> The patch introduces a new optional property "phy-reset-gpio" inspired
>> from the one use for the FEC.
>
> I don't think it's a good idea to further extend the usage of this
> binding. The driver should use the phy-handle property and
> of_phy_connect() which gives you a proper device node for the phy. Then
> the phy device node should get the reset gpio. I know it's more work,

So you suggest to pass from this binding:
macb1: ethernet@...28000 {
	phy-mode = "rmii";
	status = "okay";
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";
	phy-reset-gpio = <&pioE 6 GPIO_ACTIVE_HIGH>;

	ethernet-phy@1 {
		reg = <0x1>;
		interrupt-parent = <&pioB>;
		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;

	};
};

to this binding
macb1: ethernet@...28000 {
	phy-mode = "rmii";
	status = "okay";
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	ethernet-phy@1 {
		reg = <0x1>;
		interrupt-parent = <&pioB>;
		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
                phy-reset-gpio = <&pioE 6 GPIO_ACTIVE_HIGH>;
	};
};

> but doing it like this gives you additional goodies like proper handling
> of the max-speed property, a fixed-link if necessary and picking the

Currently there is phy_connect_direct so we can already handle the
preperty of the phy.

> correct phy if there are muliple phys on the bus.

but I agree with this one.

Gregory

>
> Sascha
>
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html