[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1450123080-206406-1-git-send-email-anjali.singhai@intel.com>
Date: Mon, 14 Dec 2015 11:57:55 -0800
From: Anjali Singhai Jain <anjali.singhai@...el.com>
To: netdev@...r.kernel.org
Cc: jeffrey.t.kirsher@...el.com
Subject: [PATCH v4 0/5] Add support for Geneve udp port offload
This patch series adds new ndo ops for Geneve add/del port, so as
to help offload Geneve tunnel functionalities such as RX checksum,
RSS, filters etc.
i40e driver has been tested with the changes to make sure the offloads
happen.
We do understand that this is not the ideal solution and most likely
will be redone with a more generic offload framework.
But this certainly will enable us to start seeing benefits of the
accelerations for Geneve tunnels.
As a side note, we did find an existing issue in i40e driver where a
service task can modify tunnel data structures with no locks held to
help linearize access. A separate patch will be taking care of that issue.
A question out to the community is regarding the driver Kconfig parameters
for VxLAN and Geneve, it would be ideal to drop those if there is a way
to help resolve vxlan/geneve_get_rx_port symbols while the tunnel modules
are not loaded.
Performance numbers:
With the offloads enable on X722 devices with remote checksum enabled
and no other tuning in terms of cpu governer etc on my test machine:
With offload
Throughput: 5527Mbits/sec with a single thread
%cpu: ~43% per core with 4 threads
Without offload
Throughput: 2364Mbits/sec with a single thread
%cpu: ~99% per core with 4 threads
These numbers will get better for X722 as it is being worked. But
this does bring out the delta in terms of when the stack is notified
with csum_level 1 and CHECKSUM_UNNECESSARY vs not without the RX offload.
v4: Comment fix and split a patch into two.
Anjali Singhai Jain (5):
geneve: Add geneve udp port offload for ethernet devices
i40e: geneve tunnel offload support
i40e: Kernel dependency update for i40e to support geneve offload
geneve: Add geneve_get_rx_port support
i40e: Call geneve_get_rx_port to get the existing Geneve ports
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists