| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1450157924-58901-5-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Mon, 14 Dec 2015 21:38:39 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Joe Schultz <jschultz@...-inc.com>, netdev@...r.kernel.org,
nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
Aaron Sierra <asierra@...-inc.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 4/9] igb: Improve cable length function for I210, etc.
From: Joe Schultz <jschultz@...-inc.com>
Previously, the PHY-specific code to get the cable length for the
I210 internal and related PHYs was reporting the cable length of a
single pair and reporting it as the min, max, and total cable length.
Update it so that all four pairs are checked so the true min, max,
and average cable lengths are reported.
Signed-off-by: Joe Schultz <jschultz@...-inc.com>
Signed-off-by: Aaron Sierra <asierra@...-inc.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/igb/e1000_defines.h | 5 ++-
drivers/net/ethernet/intel/igb/e1000_hw.h | 1 +
drivers/net/ethernet/intel/igb/e1000_phy.c | 54 ++++++++++++++++++++++----
3 files changed, 51 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index a61ee94..c3c598c 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -927,7 +927,10 @@
/* Intel i347-AT4 Registers */
-#define I347AT4_PCDL 0x10 /* PHY Cable Diagnostics Length */
+#define I347AT4_PCDL0 0x10 /* Pair 0 PHY Cable Diagnostics Length */
+#define I347AT4_PCDL1 0x11 /* Pair 1 PHY Cable Diagnostics Length */
+#define I347AT4_PCDL2 0x12 /* Pair 2 PHY Cable Diagnostics Length */
+#define I347AT4_PCDL3 0x13 /* Pair 3 PHY Cable Diagnostics Length */
#define I347AT4_PCDC 0x15 /* PHY Cable Diagnostics Control */
#define I347AT4_PAGE_SELECT 0x16
diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h
index 2003b37..4034207 100644
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -441,6 +441,7 @@ struct e1000_phy_info {
u16 cable_length;
u16 max_cable_length;
u16 min_cable_length;
+ u16 pair_length[4];
u8 mdix;
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index 8015f3b..5b54254 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -1717,6 +1717,9 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw)
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
u16 phy_data, phy_data2, index, default_page, is_cm;
+ int len_tot = 0;
+ u16 len_min;
+ u16 len_max;
switch (hw->phy.id) {
case M88E1543_E_PHY_ID:
@@ -1733,11 +1736,6 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw)
if (ret_val)
goto out;
- /* Get cable length from PHY Cable Diagnostics Control Reg */
- ret_val = phy->ops.read_reg(hw, I347AT4_PCDL, &phy_data);
- if (ret_val)
- goto out;
-
/* Check if the unit of cable length is meters or cm */
ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2);
if (ret_val)
@@ -1745,10 +1743,50 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw)
is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT);
+ /* Get cable length from Pair 0 length Regs */
+ ret_val = phy->ops.read_reg(hw, I347AT4_PCDL0, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->pair_length[0] = phy_data / (is_cm ? 100 : 1);
+ len_tot = phy->pair_length[0];
+ len_min = phy->pair_length[0];
+ len_max = phy->pair_length[0];
+
+ /* Get cable length from Pair 1 length Regs */
+ ret_val = phy->ops.read_reg(hw, I347AT4_PCDL1, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->pair_length[1] = phy_data / (is_cm ? 100 : 1);
+ len_tot += phy->pair_length[1];
+ len_min = min(len_min, phy->pair_length[1]);
+ len_max = max(len_max, phy->pair_length[1]);
+
+ /* Get cable length from Pair 2 length Regs */
+ ret_val = phy->ops.read_reg(hw, I347AT4_PCDL2, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->pair_length[2] = phy_data / (is_cm ? 100 : 1);
+ len_tot += phy->pair_length[2];
+ len_min = min(len_min, phy->pair_length[2]);
+ len_max = max(len_max, phy->pair_length[2]);
+
+ /* Get cable length from Pair 3 length Regs */
+ ret_val = phy->ops.read_reg(hw, I347AT4_PCDL3, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->pair_length[3] = phy_data / (is_cm ? 100 : 1);
+ len_tot += phy->pair_length[3];
+ len_min = min(len_min, phy->pair_length[3]);
+ len_max = max(len_max, phy->pair_length[3]);
+
/* Populate the phy structure with cable length in meters */
- phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
- phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
- phy->cable_length = phy_data / (is_cm ? 100 : 1);
+ phy->min_cable_length = len_min;
+ phy->max_cable_length = len_max;
+ phy->cable_length = len_tot / 4;
/* Reset the page selec to its original value */
ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT,
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists