| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1450157924-58901-3-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Mon, 14 Dec 2015 21:38:37 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Aaron Sierra <asierra@...-inc.com>, netdev@...r.kernel.org,
nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
Carolyn Wyborny <carolyn.wyborny@...el.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 2/9] igb: Remove GS40G specific defines/functions
From: Aaron Sierra <asierra@...-inc.com>
The I210 internal PHY can be accessed just as well with the access
functions shared by 82580, I350, and I354 devices. A side effect of
relying on the common functions, is that I210 cable length support
is folded back into the common case which effectively reverts the
following commit:
commit 59f301046b276f87483b3afa3201a4273def06a9
Author: Carolyn Wyborny <carolyn.wyborny@...el.com>
Date: Wed Oct 10 04:42:59 2012 +0000
igb: Update get cable length function for i210/i211
Cc: Carolyn Wyborny <carolyn.wyborny@...el.com>
Signed-off-by: Aaron Sierra <asierra@...-inc.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/igb/e1000_82575.c | 13 ++---
drivers/net/ethernet/intel/igb/e1000_i210.c | 5 +-
drivers/net/ethernet/intel/igb/e1000_i210.h | 2 +-
drivers/net/ethernet/intel/igb/e1000_phy.c | 82 +---------------------------
drivers/net/ethernet/intel/igb/e1000_phy.h | 15 +----
5 files changed, 11 insertions(+), 106 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 362911d..adb33e2 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -45,8 +45,6 @@ static s32 igb_get_cfg_done_82575(struct e1000_hw *);
static s32 igb_init_hw_82575(struct e1000_hw *);
static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *);
static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *);
-static s32 igb_read_phy_reg_82580(struct e1000_hw *, u32, u16 *);
-static s32 igb_write_phy_reg_82580(struct e1000_hw *, u32, u16);
static s32 igb_reset_hw_82575(struct e1000_hw *);
static s32 igb_reset_hw_82580(struct e1000_hw *);
static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool);
@@ -205,13 +203,10 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
case e1000_82580:
case e1000_i350:
case e1000_i354:
- phy->ops.read_reg = igb_read_phy_reg_82580;
- phy->ops.write_reg = igb_write_phy_reg_82580;
- break;
case e1000_i210:
case e1000_i211:
- phy->ops.read_reg = igb_read_phy_reg_gs40g;
- phy->ops.write_reg = igb_write_phy_reg_gs40g;
+ phy->ops.read_reg = igb_read_phy_reg_82580;
+ phy->ops.write_reg = igb_write_phy_reg_82580;
break;
default:
phy->ops.read_reg = igb_read_phy_reg_igp;
@@ -2153,7 +2148,7 @@ void igb_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable)
* Reads the MDI control register in the PHY at offset and stores the
* information read to data.
**/
-static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
+s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
{
s32 ret_val;
@@ -2177,7 +2172,7 @@ out:
*
* Writes data to MDI control register in the PHY at offset.
**/
-static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
+s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
{
s32 ret_val;
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c
index 29f59c7..8aa7987 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.c
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.c
@@ -861,10 +861,10 @@ s32 igb_pll_workaround_i210(struct e1000_hw *hw)
if (ret_val)
nvm_word = E1000_INVM_DEFAULT_AL;
tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL;
+ igb_write_phy_reg_82580(hw, I347AT4_PAGE_SELECT, E1000_PHY_PLL_FREQ_PAGE);
for (i = 0; i < E1000_MAX_PLL_TRIES; i++) {
/* check current state directly from internal PHY */
- igb_read_phy_reg_gs40g(hw, (E1000_PHY_PLL_FREQ_PAGE |
- E1000_PHY_PLL_FREQ_REG), &phy_word);
+ igb_read_phy_reg_82580(hw, E1000_PHY_PLL_FREQ_REG, &phy_word);
if ((phy_word & E1000_PHY_PLL_UNCONF)
!= E1000_PHY_PLL_UNCONF) {
ret_val = 0;
@@ -896,6 +896,7 @@ s32 igb_pll_workaround_i210(struct e1000_hw *hw)
/* restore WUC register */
wr32(E1000_WUC, wuc);
}
+ igb_write_phy_reg_82580(hw, I347AT4_PAGE_SELECT, 0);
/* restore MDICNFG setting */
wr32(E1000_MDICNFG, mdicnfg);
return ret_val;
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.h b/drivers/net/ethernet/intel/igb/e1000_i210.h
index eaa68a5..b2964a2 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.h
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.h
@@ -85,7 +85,7 @@ enum E1000_INVM_STRUCTURE_TYPE {
#define E1000_PCI_PMCSR_D3 0x03
#define E1000_MAX_PLL_TRIES 5
#define E1000_PHY_PLL_UNCONF 0xFF
-#define E1000_PHY_PLL_FREQ_PAGE 0xFC0000
+#define E1000_PHY_PLL_FREQ_PAGE 0xFC
#define E1000_PHY_PLL_FREQ_REG 0x000E
#define E1000_INVM_DEFAULT_AL 0x202F
#define E1000_INVM_AUTOLOAD 0x0A
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index c0df40f..c906826 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -1719,30 +1719,10 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw)
u16 phy_data, phy_data2, index, default_page, is_cm;
switch (hw->phy.id) {
- case I210_I_PHY_ID:
- /* Get cable length from PHY Cable Diagnostics Control Reg */
- ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) +
- (I347AT4_PCDL + phy->addr),
- &phy_data);
- if (ret_val)
- return ret_val;
-
- /* Check if the unit of cable length is meters or cm */
- ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) +
- I347AT4_PCDC, &phy_data2);
- if (ret_val)
- return ret_val;
-
- is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT);
-
- /* Populate the phy structure with cable length in meters */
- phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
- phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
- phy->cable_length = phy_data / (is_cm ? 100 : 1);
- break;
case M88E1543_E_PHY_ID:
case M88E1512_E_PHY_ID:
case I347AT4_E_PHY_ID:
+ case I210_I_PHY_ID:
/* Remember the original page select and set it to 7 */
ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
&default_page);
@@ -2588,66 +2568,6 @@ out:
}
/**
- * igb_write_phy_reg_gs40g - Write GS40G PHY register
- * @hw: pointer to the HW structure
- * @offset: lower half is register offset to write to
- * upper half is page to use.
- * @data: data to write at register offset
- *
- * Acquires semaphore, if necessary, then writes the data to PHY register
- * at the offset. Release any acquired semaphores before exiting.
- **/
-s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
-{
- s32 ret_val;
- u16 page = offset >> GS40G_PAGE_SHIFT;
-
- offset = offset & GS40G_OFFSET_MASK;
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return ret_val;
-
- ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
- if (ret_val)
- goto release;
- ret_val = igb_write_phy_reg_mdic(hw, offset, data);
-
-release:
- hw->phy.ops.release(hw);
- return ret_val;
-}
-
-/**
- * igb_read_phy_reg_gs40g - Read GS40G PHY register
- * @hw: pointer to the HW structure
- * @offset: lower half is register offset to read to
- * upper half is page to use.
- * @data: data to read at register offset
- *
- * Acquires semaphore, if necessary, then reads the data in the PHY register
- * at the offset. Release any acquired semaphores before exiting.
- **/
-s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- s32 ret_val;
- u16 page = offset >> GS40G_PAGE_SHIFT;
-
- offset = offset & GS40G_OFFSET_MASK;
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return ret_val;
-
- ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
- if (ret_val)
- goto release;
- ret_val = igb_read_phy_reg_mdic(hw, offset, data);
-
-release:
- hw->phy.ops.release(hw);
- return ret_val;
-}
-
-/**
* igb_set_master_slave_mode - Setup PHY for Master/slave mode
* @hw: pointer to the HW structure
*
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h
index aa1ae61..969a6dd 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.h
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
@@ -72,8 +72,8 @@ s32 igb_copper_link_setup_82580(struct e1000_hw *hw);
s32 igb_get_phy_info_82580(struct e1000_hw *hw);
s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw);
s32 igb_get_cable_length_82580(struct e1000_hw *hw);
-s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
-s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
+s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data);
s32 igb_check_polarity_m88(struct e1000_hw *hw);
/* IGP01E1000 Specific Registers */
@@ -144,17 +144,6 @@ s32 igb_check_polarity_m88(struct e1000_hw *hw);
#define E1000_CABLE_LENGTH_UNDEFINED 0xFF
-/* GS40G - I210 PHY defines */
-#define GS40G_PAGE_SELECT 0x16
-#define GS40G_PAGE_SHIFT 16
-#define GS40G_OFFSET_MASK 0xFFFF
-#define GS40G_PAGE_2 0x20000
-#define GS40G_MAC_REG2 0x15
-#define GS40G_MAC_LB 0x4140
-#define GS40G_MAC_SPEED_1G 0X0006
-#define GS40G_COPPER_SPEC 0x0010
-#define GS40G_LINE_LB 0x4000
-
/* SFP modules ID memory locations */
#define E1000_SFF_IDENTIFIER_OFFSET 0x00
#define E1000_SFF_IDENTIFIER_SFF 0x02
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists