netdev - Re: [PATCH] net: emac: emac gigabit ethernet controller driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <567023F8.80302@codeaurora.org>
Date:	Tue, 15 Dec 2015 09:30:16 -0500
From:	Christopher Covington <cov@...eaurora.org>
To:	Florian Fainelli <f.fainelli@...il.com>,
	Gilad Avidov <gavidov@...eaurora.org>, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
	linux-arm-msm@...r.kernel.org
CC:	sdharia@...eaurora.org, shankerd@...eaurora.org,
	timur@...eaurora.org, gregkh@...uxfoundation.org,
	vikrams@...eaurora.org
Subject: Re: [PATCH] net: emac: emac gigabit ethernet controller driver

Hi Florian,

Thanks for taking the time to review this code. We'll probably take
additional time to review and implement most of your suggestions but I
was confused by your two comments below.

On 12/14/2015 08:39 PM, Florian Fainelli wrote:
> On 14/12/15 16:19, Gilad Avidov wrote:

>> +static void emac_mac_irq_enable(struct emac_adapter *adpt)
>> +{
>> +	int i;
>> +
>> +	for (i = 0; i < EMAC_NUM_CORE_IRQ; i++) {
>> +		struct emac_irq			*irq = &adpt->irq[i];
>> +		const struct emac_irq_config	*irq_cfg = &emac_irq_cfg_tbl[i];
>> +
>> +		writel_relaxed(~DIS_INT, adpt->base + irq_cfg->status_reg);
>> +		writel_relaxed(irq->mask, adpt->base + irq_cfg->mask_reg);
>> +	}
>> +
>> +	wmb(); /* ensure that irq and ptp setting are flushed to HW */
> 
> Would not using writel() make the appropriate thing here instead of
> using _relaxed which has no barrier?

It appears to me that the barrier in writel() comes before the access
[1]. The barrier in this code comes after the accesses. In addition to
the ordering, if you're suggesting all writel_relaxed be switched out,
that would seem to add 7 unnecessary barriers, which could adversely
affect performance.

1. http://lxr.free-electrons.com/source/arch/arm64/include/asm/io.h#L130

> [snip]
> 
>> +	mta = readl_relaxed(adpt->base + EMAC_HASH_TAB_REG0 + (reg << 2));
>> +	mta |= (0x1 << bit);
>> +	writel_relaxed(mta, adpt->base + EMAC_HASH_TAB_REG0 + (reg << 2));
>> +	wmb(); /* ensure that the mac address is flushed to HW */
> 
> This is getting too much here, just use the correct I/O accessor for
> your platform, period.

Based on your previous comment, I'm guessing you're suggesting using
readl() and writel() here instead of *_relaxed and an explicit wmb().
Again it's not clear to me why swapping the barrier-access ordering and
adding an additional barrier would result in more correct code.

Thanks,
Christopher Covington

-- 
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html