[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-id: <1450699731-4666-1-git-send-email-vikas.bansal@samsung.com>
Date: Mon, 21 Dec 2015 17:38:51 +0530
From: Vikas Bansal <vikas.bansal@...sung.com>
To: oneukum@...e.de, netdev@...r.kernel.org, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: sumit.batra@...sung.com, Vikas Bansal <vikas.bansal@...sung.com>
Subject: [PATCH] Adding Reset resume support for CDC-EEM driver.
Pre-Condition
At the time of reset resume of a USB device, both self and bus powered devices might go to a low power state or power off state depending on the acceptable suspend time power of the system.
In case the device experiences a power glitch or completely powers off during suspend-resume, the device will lose its internal state and hence it'll again need a set interface from class driver on reset resume operation.
Issue
So far our experiments were based on a USB gadget working on cdc_eem protocol.
We have seen that device is unable to continue the packet transfer on bulk endpoints after the reset resume operation.
Solution
We have added a .reset_resume function for cdc_eem protocol which sends a set interface command on the Control endpoint. And calls the existing usbnet_resume thereafter
Signed-off-by: Vikas Bansal <vikas.bansal@...sung.com>
Signed-off-by: Sumit Batra <sumit.batra@...sung.com>
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index f7180f8..1f6f7ea 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -342,6 +342,19 @@ next:
return 1;
}
+static int cdc_eem_resume(struct usb_interface *intf)
+{
+ int ret = 0;
+ struct usbnet *dev = usb_get_intfdata(intf);
+
+ ret = usbnet_get_endpoints(dev, intf);
+ if(ret < 0)
+ goto err;
+ ret = usbnet_resume(intf);
+err:
+ return ret;
+}
+
static const struct driver_info eem_info = {
.description = "CDC EEM Device",
.flags = FLAG_ETHER | FLAG_POINTTOPOINT,
@@ -371,6 +384,7 @@ static struct usb_driver eem_driver = {
.disconnect = usbnet_disconnect,
.suspend = usbnet_suspend,
.resume = usbnet_resume,
+ .reset_resume = cdc_eem_resume,
.disable_hub_initiated_lpm = 1,
};
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists