lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 23 Dec 2015 13:42:43 +0100
From:	Bjørn Mork <bjorn@...k.no>
To:	netdev@...r.kernel.org
Cc:	linux-usb@...r.kernel.org, Enrico Mioso <mrkiko.rs@...il.com>,
	Bjørn Mork <bjorn@...k.no>
Subject: [PATCH net,stable] net: cdc_ncm: avoid changing RX/TX buffers on MTU changes

NCM buffer sizes are negotiated with the device independently of
the network device MTU.  The RX buffers are allocated by the
usbnet framework based on the rx_urb_size value set by cdc_ncm. A
single RX buffer can hold a number of MTU sized packets.

The default usbnet change_mtu ndo only modifies rx_urb_size if it
is equal to hard_mtu.  And the cdc_ncm driver will set rx_urb_size
and hard_mtu independently of each other, based on dwNtbInMaxSize
and dwNtbOutMaxSize respectively. It was therefore assumed that
usbnet_change_mtu() would never touch rx_urb_size.  This failed to
consider the case where dwNtbInMaxSize and dwNtbOutMaxSize happens
to be equal.

Fix by implementing an NCM specific change_mtu ndo, modifying the
netdev MTU without touching the buffer size settings.

Signed-off-by: Bjørn Mork <bjorn@...k.no>
---
 drivers/net/usb/cdc_mbim.c  |  2 +-
 drivers/net/usb/cdc_ncm.c   | 31 +++++++++++++++++++++++++++++++
 include/linux/usb/cdc_ncm.h |  1 +
 3 files changed, 33 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c
index 190f8d935da4..980789503f7b 100644
--- a/drivers/net/usb/cdc_mbim.c
+++ b/drivers/net/usb/cdc_mbim.c
@@ -100,7 +100,7 @@ static const struct net_device_ops cdc_mbim_netdev_ops = {
 	.ndo_stop             = usbnet_stop,
 	.ndo_start_xmit       = usbnet_start_xmit,
 	.ndo_tx_timeout       = usbnet_tx_timeout,
-	.ndo_change_mtu       = usbnet_change_mtu,
+	.ndo_change_mtu       = cdc_ncm_change_mtu,
 	.ndo_set_mac_address  = eth_mac_addr,
 	.ndo_validate_addr    = eth_validate_addr,
 	.ndo_vlan_rx_add_vid  = cdc_mbim_rx_add_vid,
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index c48c7f8ca727..b6433fdebbb6 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -41,6 +41,7 @@
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/ctype.h>
+#include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/workqueue.h>
 #include <linux/mii.h>
@@ -732,6 +733,33 @@ static void cdc_ncm_free(struct cdc_ncm_ctx *ctx)
 	kfree(ctx);
 }
 
+/* we need to override the usbnet change_mtu ndo for two reasons:
+ *  - respect the negotiated maximum datagram size
+ *  - avoid unwanted changes to rx and tx buffers
+ */
+int cdc_ncm_change_mtu(struct net_device *net, int new_mtu)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	int maxmtu = ctx->max_datagram_size - cdc_ncm_eth_hlen(dev);
+
+	if (new_mtu <= 0 || new_mtu > maxmtu)
+		return -EINVAL;
+	net->mtu = new_mtu;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_change_mtu);
+
+static const struct net_device_ops cdc_ncm_netdev_ops = {
+	.ndo_open	     = usbnet_open,
+	.ndo_stop	     = usbnet_stop,
+	.ndo_start_xmit	     = usbnet_start_xmit,
+	.ndo_tx_timeout	     = usbnet_tx_timeout,
+	.ndo_change_mtu	     = cdc_ncm_change_mtu,
+	.ndo_set_mac_address = eth_mac_addr,
+	.ndo_validate_addr   = eth_validate_addr,
+};
+
 int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting, int drvflags)
 {
 	struct cdc_ncm_ctx *ctx;
@@ -866,6 +894,9 @@ int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_
 	/* add our sysfs attrs */
 	dev->net->sysfs_groups[0] = &cdc_ncm_sysfs_attr_group;
 
+	/* must handle MTU changes */
+	dev->net->netdev_ops = &cdc_ncm_netdev_ops;
+
 	return 0;
 
 error2:
diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h
index 1f6526c76ee8..3a375d07d0dc 100644
--- a/include/linux/usb/cdc_ncm.h
+++ b/include/linux/usb/cdc_ncm.h
@@ -138,6 +138,7 @@ struct cdc_ncm_ctx {
 };
 
 u8 cdc_ncm_select_altsetting(struct usb_interface *intf);
+int cdc_ncm_change_mtu(struct net_device *net, int new_mtu);
 int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting, int drvflags);
 void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf);
 struct sk_buff *cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign);
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists