| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 23 Dec 2015 13:56:16 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Florian Fainelli <f.fainelli@...il.com>, narmstrong@...libre.com,
vivien.didelot@...oirfairelinux.com
Cc: netdev <netdev@...r.kernel.org>,
"Cory T. Tusar" <cory.tusar@...1solutions.com>,
Andrew Lunn <andrew@...n.ch>
Subject: [PATCH RFC 02/28] ARM: VF610: Add Zodiac Inflight Innovations development boards.
From: "Cory T. Tusar" <cory.tusar@...1solutions.com>
"rev a" was the first generation of the board, had has some
issues. Most of these issues are fixed in "Rev B". Put the common
parts in a .dtsi file, and add .dts files for "Rev A" and "Rev B".
Signed-off-by: Cory T. Tusar <cory.tusar@...1solutions.com>
Signed-off-by: Andrew Lunn <andrew@...n.ch>
---
arch/arm/boot/dts/Makefile | 4 +-
arch/arm/boot/dts/vf610-zii-dev-rev-a.dts | 409 ++++++++++++++++++++++++++++
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 287 ++++++++++++++++++++
arch/arm/boot/dts/vf610-zii-dev.dtsi | 436 ++++++++++++++++++++++++++++++
4 files changed, 1135 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/vf610-zii-dev-rev-a.dts
create mode 100644 arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
create mode 100644 arch/arm/boot/dts/vf610-zii-dev.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 30bbc3746130..f462036d4ff8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -359,7 +359,9 @@ dtb-$(CONFIG_SOC_VF610) += \
vf610-colibri-eval-v3.dtb \
vf610m4-colibri.dtb \
vf610-cosmic.dtb \
- vf610-twr.dtb
+ vf610-twr.dtb \
+ vf610-zii-dev-rev-a.dtb \
+ vf610-zii-dev-rev-b.dtb
dtb-$(CONFIG_ARCH_MXS) += \
imx23-evk.dtb \
imx23-olinuxino.dtb \
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-a.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-a.dts
new file mode 100644
index 000000000000..08bec6bd869a
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-a.dts
@@ -0,0 +1,409 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610-zii-dev.dtsi"
+
+/ {
+ model = "ZII VF610 Development Board, Rev A";
+ compatible = "zii,vf610dev-a", "zii,vf610dev", "fsl,vf610";
+
+ chosen {
+ bootargs = "console=ttyLP0,115200n8";
+ stdout-path = &uart0;
+ };
+
+ memory {
+ reg = <0x80000000 0x8000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pinctrl_leds_debug>;
+ pinctrl-names = "default";
+
+ debug_1 {
+ label = "zii:green:debug1";
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ dsa@0 {
+ compatible = "marvell,dsa";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ dsa,ethernet = <&fec1>;
+ dsa,mii-bus = <&mdio1>;
+
+ /* 6352 - Primary - 7 ports */
+ switch0: switch@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x02 0>;
+ eeprom-length = <512>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ };
+
+ switch0port5: port@5 {
+ reg = <5>;
+ label = "dsa";
+ phy-mode = "rgmii-txid";
+ link = <&switch1port6
+ &switch2port9>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ };
+
+ /* 6352 - Secondary - 7 ports */
+ switch1: switch@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x04 1>;
+ eeprom-length = <512>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan5";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan6";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan7";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan8";
+ };
+
+ switch1port4: port@4 {
+ reg = <4>;
+ label = "dsa";
+ link = <&switch2port9>;
+ };
+
+ switch1port6: port@6 {
+ reg = <6>;
+ label = "dsa";
+ phy-mode = "rgmii-txid";
+ link = <&switch0port5>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+
+ /* 6185 - 10 ports */
+ switch2: switch@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x06 2>;
+
+ port@1 {
+ reg = <1>;
+ label = "optical3";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "optical4";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ switch2port9: port@9 {
+ reg = <9>;
+ label = "dsa";
+ link = <&switch1port4
+ &switch0port5>;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_mux_reset>;
+
+ vf610-zii {
+ pinctrl_leds_debug: pinctrl-leds-debug {
+ fsl,pins = <
+ VF610_PAD_PTE13__GPIO_118 0x31c2
+ >;
+ };
+
+ pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
+ fsl,pins = <
+ VF610_PAD_PTE14__GPIO_119 0x31c2
+ >;
+ };
+
+ pinctrl_adc0_ad5: adc0ad5grp {
+ fsl,pins = <
+ VF610_PAD_PTC30__ADC0_SE5 0xa1
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTA7__GPIO_134 0x219d
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ /* -------------------------------------------------------------
+ * speed: high (200 MHz)
+ * slew rate: slow
+ * open drain: enabled
+ * hysteresis: Schmitt trigger
+ * drive strength: 20 Ohm
+ * pull strength: 22 kOhm pull-up
+ * pull / keeper: enabled
+ * pull / keeper select: pull
+ * output buffer: enabled
+ * input buffer: enabled
+ */
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__I2C1_SCL 0x37ff
+ VF610_PAD_PTB17__I2C1_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ VF610_PAD_PTA22__I2C2_SCL 0x37ff
+ VF610_PAD_PTA23__I2C2_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ VF610_PAD_PTA30__I2C3_SCL 0x37ff
+ VF610_PAD_PTA31__I2C3_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_pwm0: pwm0grp {
+ fsl,pins = <
+ VF610_PAD_PTB0__FTM0_CH0 0x1582
+ VF610_PAD_PTB1__FTM0_CH1 0x1582
+ VF610_PAD_PTB2__FTM0_CH2 0x1582
+ VF610_PAD_PTB3__FTM0_CH3 0x1582
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB23__UART1_TX 0x21a2
+ VF610_PAD_PTB24__UART1_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__UART2_TX 0x21a2
+ VF610_PAD_PTD1__UART2_RX 0x21a1
+ >;
+ };
+
+ pinctrl_qspi0: qspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
+ VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff
+ VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3
+ VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3
+ VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3
+ VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3
+ >;
+ };
+
+ pinctrl_usb0_host: usb0-host-grp {
+ fsl,pins = <
+ VF610_PAD_PTD6__GPIO_85 0x62
+ >;
+ };
+ };
+};
+
+&L2 {
+ arm,data-latency = <2 1 2>;
+ arm,tag-latency = <3 2 3>;
+};
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbdev0 {
+ disable-over-current;
+ status = "okay";
+ vbus-supply = <&usb0_vbus>;
+ dr_mode = "host";
+};
+
+&usbh1 {
+ disable-over-current;
+ status = "okay";
+};
+
+&usbmisc0 {
+ status = "okay";
+};
+
+&usbmisc1 {
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
+&usbphy1 {
+ status = "okay";
+};
+
+&qspi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi0>;
+ fsl,nor-size = <0x10000000>;
+ fsl,spi-num-chipselects = <2>;
+ status = "okay";
+
+ flash0: mt25ql02gc@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,mt25ql02gc";
+ spi-max-frequency = <66000000>;
+ reg = <0>;
+
+ partition@0 {
+ label = "mt25ql02gc-0-uboot";
+ reg = <0x0 0x0100000>;
+ };
+
+ partition2@...000 {
+ label = "mt25ql02gc-0-dtb";
+ reg = <0x0100000 0x0100000>;
+ };
+
+ partition3@...000 {
+ label = "mt25ql02gc-0-kernel";
+ reg = <0x0200000 0x0500000>;
+ };
+
+ partition4@...000 {
+ label = "mt25ql02gc-0-rfs";
+ reg = <0x0600000 0x8000000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
new file mode 100644
index 000000000000..6e657a9312ce
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -0,0 +1,287 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610-zii-dev.dtsi"
+
+/ {
+ model = "ZII VF610 Development Board, Rev B";
+ compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610";
+
+ chosen {
+ bootargs = "console=ttyLP0,115200n8";
+ stdout-path = &uart0;
+ };
+
+ memory {
+ reg = <0x80000000 0x8000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pinctrl_leds_debug>;
+ pinctrl-names = "default";
+
+ debug_1 {
+ label = "zii:green:debug1";
+ gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ mdio-mux {
+ compatible = "mdio-mux-gpio";
+ pinctrl-0 = <&pinctrl_mdio_mux>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH
+ &gpio0 9 GPIO_ACTIVE_HIGH
+ &gpio0 24 GPIO_ACTIVE_HIGH
+ &gpio0 25 GPIO_ACTIVE_HIGH>;
+ mdio-parent-bus = <&mdio1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio_mux_1: mdio@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio_mux_2: mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio_mux_4: mdio@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio_mux_8: mdio@8 {
+ reg = <8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ dsa@0 {
+ compatible = "marvell,dsa";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ dsa,ethernet = <&fec1>;
+ dsa,mii-bus = <&mdio_mux_1>;
+
+ /* 6352 - Primary - 7 ports */
+ switch0: switch@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x00 0>;
+ eeprom-length = <512>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ switch0port5: port@5 {
+ reg = <5>;
+ label = "dsa";
+ phy-mode = "rgmii-txid";
+ link = <&switch1port6
+ &switch2port9>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ };
+
+ /* 6352 - Secondary - 7 ports */
+ switch1: switch@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x00 1>;
+ eeprom-length = <512>;
+ mii-bus = <&mdio_mux_2>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan3";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan4";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan5";
+ };
+
+ switch1port5: port@5 {
+ reg = <5>;
+ label = "dsa";
+ link = <&switch2port9>;
+ phy-mode = "rgmii-txid";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ switch1port6: port@6 {
+ reg = <6>;
+ label = "dsa";
+ phy-mode = "rgmii-txid";
+ link = <&switch0port5>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+
+ /* 6185 - 10 ports */
+ switch2: switch@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x00 2>;
+ mii-bus = <&mdio_mux_4>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan6";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan7";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan8";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "optical3";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ link-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "optical4";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ link-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+
+ };
+ };
+
+ switch2port9: port@9 {
+ reg = <9>;
+ label = "dsa";
+ phy-mode = "rgmii-txid";
+ link = <&switch1port5
+ &switch0port5>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_mux_reset>;
+
+ vf610-zii {
+ pinctrl_mdio_mux: pinctrl-mdio-mux {
+ fsl,pins = <
+ VF610_PAD_PTA18__GPIO_8 0x31c2
+ VF610_PAD_PTA19__GPIO_9 0x31c2
+ VF610_PAD_PTB2__GPIO_24 0x31c2
+ VF610_PAD_PTB3__GPIO_25 0x31c2
+ >;
+ };
+ pinctrl_fec0: fec0grp {
+ fsl,pins = <
+ VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2
+ VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3
+ VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
+ VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
+ VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
+ VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
+ VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
+ VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
+ VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_leds_debug: pinctrl-leds-debug {
+ fsl,pins = <
+ VF610_PAD_PTD20__GPIO_74 0x31c2
+ >;
+ };
+ pinctrl_pca9554_opt: pinctrl-pca95540-opt {
+ fsl,pins = <
+ VF610_PAD_PTB18__GPIO_40 0x219d
+ >;
+ };
+ };
+};
+
+&fec0 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec0>;
+ status = "okay";
+};
+
+&i2c0 {
+ gpio6: pca9505@20 {
+ compatible = "nxp,pca9554";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9554_opt>;
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi
new file mode 100644
index 000000000000..9ff7abbbb36e
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi
@@ -0,0 +1,436 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "vf610.dtsi"
+
+/ {
+ audio_ext: mclk-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ enet_ext: eth-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vcc_3v3_mcu: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ usb0_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ pinctrl-0 = <&pinctrl_usb_vbus>;
+ reg = <2>;
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 6 0>;
+ };
+ };
+};
+
+&adc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_ad5>;
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ status = "okay";
+
+ gpio5: pca9505@20 {
+ compatible = "nxp,pca9554";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ lm75@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ at24c04@50 {
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ };
+
+ at24c04@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ };
+
+ ds1682@6b {
+ compatible = "dallas,ds1682";
+ reg = <0x6b>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ tca9548@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+
+ i2c2_0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ sfp1: at24c04@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ };
+
+ i2c2_1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ sfp2: at24c04@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ };
+
+ i2c2_2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ sfp3: at24c04@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ };
+
+ i2c2_3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ sfp4: at24c04@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+
+ };
+
+ i2c2_4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_mux_reset>;
+
+ vf610-zii {
+ pinctrl_usb_vbus: pinctrl-usb-vbus {
+ fsl,pins = <
+ VF610_PAD_PTA16__GPIO_6 0x31c2
+ >;
+ };
+
+ pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
+ fsl,pins = <
+ VF610_PAD_PTE14__GPIO_119 0x31c2
+ >;
+ };
+
+ pinctrl_adc0_ad5: adc0ad5grp {
+ fsl,pins = <
+ VF610_PAD_PTC30__ADC0_SE5 0xa1
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTA7__GPIO_134 0x219d
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ /* -------------------------------------------------------------
+ * speed: high (200 MHz)
+ * slew rate: slow
+ * open drain: enabled
+ * hysteresis: Schmitt trigger
+ * drive strength: 20 Ohm
+ * pull strength: 22 kOhm pull-up
+ * pull / keeper: enabled
+ * pull / keeper select: pull
+ * output buffer: enabled
+ * input buffer: enabled
+ */
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__I2C1_SCL 0x37ff
+ VF610_PAD_PTB17__I2C1_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ VF610_PAD_PTA22__I2C2_SCL 0x37ff
+ VF610_PAD_PTA23__I2C2_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ VF610_PAD_PTA30__I2C3_SCL 0x37ff
+ VF610_PAD_PTA31__I2C3_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_pwm0: pwm0grp {
+ fsl,pins = <
+ VF610_PAD_PTB0__FTM0_CH0 0x1582
+ VF610_PAD_PTB1__FTM0_CH1 0x1582
+ VF610_PAD_PTB2__FTM0_CH2 0x1582
+ VF610_PAD_PTB3__FTM0_CH3 0x1582
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB23__UART1_TX 0x21a2
+ VF610_PAD_PTB24__UART1_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__UART2_TX 0x21a2
+ VF610_PAD_PTD1__UART2_RX 0x21a1
+ >;
+ };
+
+ pinctrl_qspi0: qspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
+ VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff
+ VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3
+ VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3
+ VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3
+ VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3
+ >;
+ };
+
+ pinctrl_usb0_host: usb0-host-grp {
+ fsl,pins = <
+ VF610_PAD_PTD6__GPIO_85 0x62
+ >;
+ };
+ };
+};
+
+&L2 {
+ arm,data-latency = <2 1 2>;
+ arm,tag-latency = <3 2 3>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbdev0 {
+ disable-over-current;
+ status = "okay";
+ vbus-supply = <&usb0_vbus>;
+ dr_mode = "host";
+};
+
+&usbh1 {
+ disable-over-current;
+ status = "okay";
+};
+
+&usbmisc0 {
+ status = "okay";
+};
+
+&usbmisc1 {
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
+&usbphy1 {
+ status = "okay";
+};
+
+&qspi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi0>;
+ fsl,nor-size = <0x10000000>;
+ fsl,spi-num-chipselects = <2>;
+ status = "okay";
+
+ flash0: mt25ql02gc@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,mt25ql02gc";
+ spi-max-frequency = <66000000>;
+ reg = <0>;
+
+ partition@0 {
+ label = "mt25ql02gc-0-uboot";
+ reg = <0x0 0x0100000>;
+ };
+
+ partition2@...000 {
+ label = "mt25ql02gc-0-dtb";
+ reg = <0x0100000 0x0100000>;
+ };
+
+ partition3@...000 {
+ label = "mt25ql02gc-0-kernel";
+ reg = <0x0200000 0x0500000>;
+ };
+
+ partition4@...000 {
+ label = "mt25ql02gc-0-rfs";
+ reg = <0x0600000 0x8000000>;
+ };
+ };
+};
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists