[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1450954493-2165-1-git-send-email-hariprasad@chelsio.com>
Date: Thu, 24 Dec 2015 16:24:53 +0530
From: Hariprasad Shenai <hariprasad@...lsio.com>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, leedom@...lsio.com, nirranjan@...lsio.com,
Hariprasad Shenai <hariprasad@...lsio.com>
Subject: [PATCH net-next] cxgb4: Remove deprecated module parameters
Remove deprecated module parameters, and mark one parameter as
deprecated.
Signed-off-by: Hariprasad Shenai <hariprasad@...lsio.com>
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 54 +------------------------
1 file changed, 2 insertions(+), 52 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index bfe50aa..b8a5fb0 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -162,19 +162,8 @@ MODULE_FIRMWARE(FW6_FNAME);
static uint force_init;
module_param(force_init, uint, 0644);
-MODULE_PARM_DESC(force_init, "Forcibly become Master PF and initialize adapter");
-
-/*
- * Normally if the firmware we connect to has Configuration File support, we
- * use that and only fall back to the old Driver-based initialization if the
- * Configuration File fails for some reason. If force_old_init is set, then
- * we'll always use the old Driver-based initialization sequence.
- */
-static uint force_old_init;
-
-module_param(force_old_init, uint, 0644);
-MODULE_PARM_DESC(force_old_init, "Force old initialization sequence, deprecated"
- " parameter");
+MODULE_PARM_DESC(force_init, "Forcibly become Master PF and initialize adapter,"
+ "deprecated parameter");
static int dflt_msg_enable = DFLT_MSG_ENABLE;
@@ -196,23 +185,6 @@ module_param(msi, int, 0644);
MODULE_PARM_DESC(msi, "whether to use INTx (0), MSI (1) or MSI-X (2)");
/*
- * Queue interrupt hold-off timer values. Queues default to the first of these
- * upon creation.
- */
-static unsigned int intr_holdoff[SGE_NTIMERS - 1] = { 5, 10, 20, 50, 100 };
-
-module_param_array(intr_holdoff, uint, NULL, 0644);
-MODULE_PARM_DESC(intr_holdoff, "values for queue interrupt hold-off timers "
- "0..4 in microseconds, deprecated parameter");
-
-static unsigned int intr_cnt[SGE_NCOUNTERS - 1] = { 4, 8, 16 };
-
-module_param_array(intr_cnt, uint, NULL, 0644);
-MODULE_PARM_DESC(intr_cnt,
- "thresholds 1..3 for queue interrupt packet counters, "
- "deprecated parameter");
-
-/*
* Normally we tell the chip to deliver Ingress Packets into our DMA buffers
* offset by 2 bytes in order to have the IP headers line up on 4-byte
* boundaries. This is a requirement for many architectures which will throw
@@ -226,13 +198,7 @@ MODULE_PARM_DESC(intr_cnt,
*/
static int rx_dma_offset = 2;
-static bool vf_acls;
-
#ifdef CONFIG_PCI_IOV
-module_param(vf_acls, bool, 0644);
-MODULE_PARM_DESC(vf_acls, "if set enable virtualization L2 ACL enforcement, "
- "deprecated parameter");
-
/* Configure the number of PCI-E Virtual Function which are to be instantiated
* on SR-IOV Capable Physical Functions.
*/
@@ -253,12 +219,6 @@ module_param(select_queue, int, 0644);
MODULE_PARM_DESC(select_queue,
"Select between kernel provided method of selecting or driver method of selecting TX queue. Default is kernel method.");
-static unsigned int tp_vlan_pri_map = HW_TPL_FR_MT_PR_IV_P_FC;
-
-module_param(tp_vlan_pri_map, uint, 0644);
-MODULE_PARM_DESC(tp_vlan_pri_map, "global compressed filter configuration, "
- "deprecated parameter");
-
static struct dentry *cxgb4_debugfs_root;
static LIST_HEAD(adapter_list);
@@ -3141,16 +3101,6 @@ static int adap_init1(struct adapter *adap, struct fw_caps_config_cmd *c)
if (ret < 0)
return ret;
- /* select capabilities we'll be using */
- if (c->niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) {
- if (!vf_acls)
- c->niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM);
- else
- c->niccaps = htons(FW_CAPS_CONFIG_NIC_VM);
- } else if (vf_acls) {
- dev_err(adap->pdev_dev, "virtualization ACLs not supported");
- return ret;
- }
c->op_to_write = htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) |
FW_CMD_REQUEST_F | FW_CMD_WRITE_F);
ret = t4_wr_mbox(adap, adap->mbox, c, sizeof(*c), NULL);
--
2.3.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists