| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 24 Dec 2015 14:52:19 +0000
From: "Tantilov, Emil S" <emil.s.tantilov@...el.com>
To: zhuyj <zyjzyj2000@...il.com>,
"Kirsher, Jeffrey T" <jeffrey.t.kirsher@...el.com>,
"Brandeburg, Jesse" <jesse.brandeburg@...el.com>,
"Nelson, Shannon" <shannon.nelson@...el.com>,
"Wyborny, Carolyn" <carolyn.wyborny@...el.com>,
"Skidmore, Donald C" <donald.c.skidmore@...el.com>,
"Allan, Bruce W" <bruce.w.allan@...el.com>,
"Ronciak, John" <john.ronciak@...el.com>,
"Williams, Mitch A" <mitch.a.williams@...el.com>,
"intel-wired-lan@...ts.osuosl.org" <intel-wired-lan@...ts.osuosl.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>
CC: "Viswanathan, Ven (Wind River)" <venkat.viswanathan@...driver.com>,
"Shteinbock, Boris (Wind River)" <boris.shteinbock@...driver.com>,
"Bourg, Vincent (Wind River)" <vincent.bourg@...driver.com>
Subject: RE: [Intel-wired-lan] [PATCH 1/1] ixgbe: force to synchronize
reporting "link on" and getting speed and duplex
>-----Original Message-----
>From: zhuyj [mailto:zyjzyj2000@...il.com]
>Sent: Wednesday, December 23, 2015 10:24 PM
>To: Tantilov, Emil S; Kirsher, Jeffrey T; Brandeburg, Jesse; Nelson,
>Shannon; Wyborny, Carolyn; Skidmore, Donald C; Allan, Bruce W; Ronciak,
>John; Williams, Mitch A; intel-wired-lan@...ts.osuosl.org;
>netdev@...r.kernel.org; e1000-devel@...ts.sourceforge.net
>Cc: Viswanathan, Ven (Wind River); Shteinbock, Boris (Wind River); Bourg,
>Vincent (Wind River)
>Subject: Re: [Intel-wired-lan] [PATCH 1/1] ixgbe: force to synchronize
>reporting "link on" and getting speed and duplex
>
>On 12/24/2015 01:58 PM, Tantilov, Emil S wrote:
>>> -----Original Message-----
>>> From: zhuyj [mailto:zyjzyj2000@...il.com]
>>> Sent: Wednesday, December 23, 2015 6:28 PM
>>> To: Tantilov, Emil S; Kirsher, Jeffrey T; Brandeburg, Jesse; Nelson,
>>> Shannon; Wyborny, Carolyn; Skidmore, Donald C; Allan, Bruce W; Ronciak,
>>> John; Williams, Mitch A; intel-wired-lan@...ts.osuosl.org;
>>> netdev@...r.kernel.org; e1000-devel@...ts.sourceforge.net
>>> Cc: Viswanathan, Ven (Wind River); Shteinbock, Boris (Wind River);
>Bourg,
>>> Vincent (Wind River)
>>> Subject: Re: [Intel-wired-lan] [PATCH 1/1] ixgbe: force to synchronize
>>> reporting "link on" and getting speed and duplex
>>>
>>> On 12/23/2015 11:59 PM, Tantilov, Emil S wrote:
>>>>> -----Original Message-----
>>>>> From: Intel-wired-lan [mailto:intel-wired-lan-
>bounces@...ts.osuosl.org]
>>> On
>>>>> Behalf Of zyjzyj2000@...il.com
>>>>> Sent: Tuesday, December 22, 2015 10:47 PM
>>>>> To: Kirsher, Jeffrey T; Brandeburg, Jesse; Nelson, Shannon; Wyborny,
>>>>> Carolyn; Skidmore, Donald C; Allan, Bruce W; Ronciak, John; Williams,
>>> Mitch
>>>>> A; intel-wired-lan@...ts.osuosl.org; netdev@...r.kernel.org; e1000-
>>>>> devel@...ts.sourceforge.net
>>>>> Cc: Viswanathan, Ven (Wind River); Shteinbock, Boris (Wind River);
>>> Bourg,
>>>>> Vincent (Wind River)
>>>>> Subject: [Intel-wired-lan] [PATCH 1/1] ixgbe: force to synchronize
>>>>> reporting "link on" and getting speed and duplex
>>>>>
>>>>> From: Zhu Yanjun <zyjzyj2000@...il.com>
>>>>>
>>>>> In X540 NIC, there is a time span between reporting "link on" and
>>>>> getting the speed and duplex. To a bonding driver in 802.3ad mode,
>>>>> this time span will make it not work well if the time span is big
>>>>> enough. The big time span will make bonding driver change the state of
>>>>> the slave device to up while the speed and duplex of the slave device
>>>>> can not be gotten. Later the bonding driver will not have change to
>>>>> get the speed and duplex of the slave device. The speed and duplex of
>>>>> the slave device are important to a bonding driver in 802.3ad mode.
>>>>>
>>>>> To 82599_SFP NIC and other kinds of NICs, this problem does
>>>>> not exist. As such, it is necessary for X540 to report"link on" when
>>>>> the link speed is not IXGBE_LINK_SPEED_UNKNOWN.
>>>>>
>>>>> Signed-off-by: Zhu Yanjun <zyjzyj2000@...il.com>
>>>>> ---
>>>>> drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 16 +++++++++++++++-
>>>>> 1 file changed, 15 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
>>>>> b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
>>>>> index aed8d02..cb9d310 100644
>>>>> --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
>>>>> +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
>>>>> @@ -6479,7 +6479,21 @@ static void ixgbe_watchdog_link_is_up(struct
>>>>> ixgbe_adapter *adapter)
>>>>> (flow_rx ? "RX" :
>>>>> (flow_tx ? "TX" : "None"))));
>>>>>
>>>>> - netif_carrier_on(netdev);
>>>>> + /*
>>>>> + * In X540 NIC, there is a time span between reporting "link
>on"
>>>>> + * and getting the speed and duplex. To a bonding driver in
>802.3ad
>>>>> + * mode, this time span will make it not work well if the time
>span
>>>>> + * is big enough. To 82599_SFP NIC and other kinds of NICs,
>this
>>>>> + * problem does not exist. As such, it is better for X540 to
>report
>>>>> + * "link on" when the link speed is not
>IXGBE_LINK_SPEED_UNKNOWN.
>>>>> + */
>>>>> + if ((hw->mac.type == ixgbe_mac_X540) &&
>>>>> + (link_speed != IXGBE_LINK_SPEED_UNKNOWN)) {
>>>>> + netif_carrier_on(netdev);
>>>>> + } else {
>>>>> + netif_carrier_on(netdev);
>>>>> + }
>>>>> +
>>>>> ixgbe_check_vf_rate_limit(adapter);
>>>>>
>>>>> /* enable transmits */
>>>>> --
>>>>> 1.7.9.5
>>>> NAK
>>>>
>>>> I have already submitted a patch that will address the issue with
>bonding
>>> reporting
>>>> unknown speed (in /proc/bonding/bondX) after the link is established
>due
>>> to link flaps:
>>>> http://patchwork.ozlabs.org/patch/552485/
>>>>
>>>> The bonding driver gets the speed from ethtool and this is where the
>>> reporting needs
>>>> to be fixed. The issue is that the bonding driver polls for
>>> netif_carrier_ok() at a
>>>> certain rate and as such will not be able to detect rapid link changes.
>>> Thanks for your reply. The root cause is different from my problem. My
>>> problem is that
>>> "link up" is prior to "speed and duplex". That is, the physical NIC
>>> reports "link up" while
>> The "link up" event is a result of an LSC interrupt, the speed is
>> determined as result of that interrupt by checking the LINKS register.
>Hi,
>
>Sorry. I do not agree with you. Please see the followings for details.
>
>/**
> * ixgbe_watchdog_update_link - update the link status
> * @adapter: pointer to the device adapter structure
> * @link_speed: pointer to a u32 to store the link_speed
> **/
>static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter)
>
> From this function, link_up and link_speed is from watchdo poll.
>
>Thanks for your reply.
ixgbe_watchdog_update_link() only runs when the IXGBE_FLAG_NEED_LINK_UPDATE is
set which can happen in 2 situations - LSC is received or the interface is
brought up. At that point the driver will call hw->mac.ops.check_link() which
sets adapter->link_up based on the LINKS register and if we have link_up then
we update the link status:
6669 if (adapter->link_up)
6670 ixgbe_watchdog_link_is_up(adapter);
The thing is if the LINKS.LINK_UP bit was set then at that point we also have a
speed which is contrary to what you are suggesting. If you want to debug your
issue you have to monitor the LINKS register.
That is why I asked for the dmesg output - if your claim is correct then the
"Link Up" event in dmesg will be reporting "unknown speed" and if not then we
are not dealing with delayed speed, but a simple link flap.
Thanks,
Emil
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists