[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1451089622-14957-4-git-send-email-martin.blumenstingl@googlemail.com>
Date: Sat, 26 Dec 2015 01:27:01 +0100
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To: netdev@...r.kernel.org
Cc: f.fainelli@...il.com, slash.tmp@...e.fr,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH 3/4] net: phy: at803x: Clean up duplicate register definitions
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
---
drivers/net/phy/at803x.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 0b262a2..6e8aafd 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -20,9 +20,12 @@
#include <linux/gpio/consumer.h>
#define AT803X_INTR_ENABLE 0x12
+#define AT803X_INTR_ENABLE_INIT 0xec00
#define AT803X_INTR_STATUS 0x13
+
#define AT803X_SMART_SPEED 0x14
#define AT803X_LED_CONTROL 0x18
+
#define AT803X_WOL_ENABLE 0x01
#define AT803X_DEVICE_ADDR 0x03
#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
@@ -31,13 +34,13 @@
#define AT803X_MMD_ACCESS_CONTROL 0x0D
#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
#define AT803X_FUNC_DATA 0x4003
-#define AT803X_INER 0x0012
-#define AT803X_INER_INIT 0xec00
-#define AT803X_INSR 0x0013
+
#define AT803X_DEBUG_ADDR 0x1D
#define AT803X_DEBUG_DATA 0x1E
+
#define AT803X_DEBUG_REG_0 0x00
#define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15)
+
#define AT803X_DEBUG_REG_5 0x05
#define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8)
@@ -295,7 +298,7 @@ static int at803x_ack_interrupt(struct phy_device *phydev)
{
int err;
- err = phy_read(phydev, AT803X_INSR);
+ err = phy_read(phydev, AT803X_INTR_STATUS);
return (err < 0) ? err : 0;
}
@@ -305,13 +308,13 @@ static int at803x_config_intr(struct phy_device *phydev)
int err;
int value;
- value = phy_read(phydev, AT803X_INER);
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
- err = phy_write(phydev, AT803X_INER,
- value | AT803X_INER_INIT);
+ err = phy_write(phydev, AT803X_INTR_ENABLE,
+ value | AT803X_INTR_ENABLE_INIT);
else
- err = phy_write(phydev, AT803X_INER, 0);
+ err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
return err;
}
--
2.6.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists