[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <567F5AF8.6090402@gmail.com>
Date: Sat, 26 Dec 2015 19:28:56 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
netdev@...r.kernel.org
Cc: slash.tmp@...e.fr
Subject: Re: [PATCH 3/4] net: phy: at803x: Clean up duplicate register
definitions
Le 25/12/2015 16:27, Martin Blumenstingl a écrit :
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
> ---
> drivers/net/phy/at803x.c | 19 +++++++++++--------
> 1 file changed, 11 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
> index 0b262a2..6e8aafd 100644
> --- a/drivers/net/phy/at803x.c
> +++ b/drivers/net/phy/at803x.c
> @@ -20,9 +20,12 @@
> #include <linux/gpio/consumer.h>
>
> #define AT803X_INTR_ENABLE 0x12
> +#define AT803X_INTR_ENABLE_INIT 0xec00
> #define AT803X_INTR_STATUS 0x13
> +
> #define AT803X_SMART_SPEED 0x14
> #define AT803X_LED_CONTROL 0x18
> +
> #define AT803X_WOL_ENABLE 0x01
> #define AT803X_DEVICE_ADDR 0x03
> #define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
> @@ -31,13 +34,13 @@
> #define AT803X_MMD_ACCESS_CONTROL 0x0D
> #define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
> #define AT803X_FUNC_DATA 0x4003
> -#define AT803X_INER 0x0012
> -#define AT803X_INER_INIT 0xec00
> -#define AT803X_INSR 0x0013
> +
> #define AT803X_DEBUG_ADDR 0x1D
> #define AT803X_DEBUG_DATA 0x1E
> +
> #define AT803X_DEBUG_REG_0 0x00
> #define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15)
> +
> #define AT803X_DEBUG_REG_5 0x05
> #define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8)
>
> @@ -295,7 +298,7 @@ static int at803x_ack_interrupt(struct phy_device *phydev)
> {
> int err;
>
> - err = phy_read(phydev, AT803X_INSR);
> + err = phy_read(phydev, AT803X_INTR_STATUS);
>
> return (err < 0) ? err : 0;
> }
> @@ -305,13 +308,13 @@ static int at803x_config_intr(struct phy_device *phydev)
> int err;
> int value;
>
> - value = phy_read(phydev, AT803X_INER);
> + value = phy_read(phydev, AT803X_INTR_ENABLE);
>
> if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
> - err = phy_write(phydev, AT803X_INER,
> - value | AT803X_INER_INIT);
> + err = phy_write(phydev, AT803X_INTR_ENABLE,
> + value | AT803X_INTR_ENABLE_INIT);
> else
> - err = phy_write(phydev, AT803X_INER, 0);
> + err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
>
> return err;
> }
>
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists