| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1451912823-5245-17-git-send-email-peppe.cavallaro@st.com>
Date: Mon, 4 Jan 2016 14:07:01 +0100
From: Giuseppe Cavallaro <peppe.cavallaro@...com>
To: <netdev@...r.kernel.org>
CC: <alexandre.torgue@...com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>
Subject: [PATCHv2 (net-next.git) 16/18] stmmac: do not perform zero-copy for rx frames
This patch is to allow this driver to copy tiny frames during the reception
process. This is giving more stability while stressing the driver on STi
embedded systems.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@...com>
---
V2: rx_copybreak tunable by using ethtool
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 +
.../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 39 +++++++++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 61 +++++++++++++++-----
3 files changed, 86 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index b73e8d8..c94ae65 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -76,6 +76,7 @@ struct stmmac_priv {
unsigned int dirty_rx;
unsigned int dma_rx_size;
unsigned int dma_buf_sz;
+ unsigned int rx_copybreak;
u32 rx_riwt;
int hwts_rx_en;
dma_addr_t *rx_skbuff_dma;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index c803d4c..3c7928e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -781,6 +781,43 @@ static int stmmac_get_ts_info(struct net_device *dev,
return ethtool_op_get_ts_info(dev, info);
}
+static int stmmac_get_tunable(struct net_device *dev,
+ const struct ethtool_tunable *tuna, void *data)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ int ret = 0;
+
+ switch (tuna->id) {
+ case ETHTOOL_RX_COPYBREAK:
+ *(u32 *)data = priv->rx_copybreak;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static int stmmac_set_tunable(struct net_device *dev,
+ const struct ethtool_tunable *tuna,
+ const void *data)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ int ret = 0;
+
+ switch (tuna->id) {
+ case ETHTOOL_RX_COPYBREAK:
+ priv->rx_copybreak = *(u32 *)data;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
static const struct ethtool_ops stmmac_ethtool_ops = {
.begin = stmmac_check_if_running,
.get_drvinfo = stmmac_ethtool_getdrvinfo,
@@ -803,6 +840,8 @@ static const struct ethtool_ops stmmac_ethtool_ops = {
.get_ts_info = stmmac_get_ts_info,
.get_coalesce = stmmac_get_coalesce,
.set_coalesce = stmmac_set_coalesce,
+ .get_tunable = stmmac_get_tunable,
+ .set_tunable = stmmac_set_tunable,
};
void stmmac_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 879cf77..b431046 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -99,6 +99,8 @@ static int buf_sz = DEFAULT_BUFSIZE;
module_param(buf_sz, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(buf_sz, "DMA buffer size");
+#define STMMAC_RX_COPYBREAK 256
+
static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
NETIF_MSG_LINK | NETIF_MSG_IFUP |
NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
@@ -1842,6 +1844,7 @@ static int stmmac_open(struct net_device *dev)
priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
priv->dma_buf_sz = STMMAC_ALIGN(buf_sz);
+ priv->rx_copybreak = STMMAC_RX_COPYBREAK;
ret = alloc_dma_desc_resources(priv);
if (ret < 0) {
@@ -2195,8 +2198,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv)
struct sk_buff *skb;
skb = netdev_alloc_skb_ip_align(priv->dev, bfsize);
-
- if (unlikely(skb == NULL))
+ if (unlikely(!skb))
break;
priv->rx_skbuff[entry] = skb;
@@ -2319,23 +2321,52 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit)
pr_debug("\tframe size %d, COE: %d\n",
frame_len, status);
}
- skb = priv->rx_skbuff[entry];
- if (unlikely(!skb)) {
- pr_err("%s: Inconsistent Rx descriptor chain\n",
- priv->dev->name);
- priv->dev->stats.rx_dropped++;
- break;
+
+ if (unlikely(frame_len < priv->rx_copybreak)) {
+ skb = netdev_alloc_skb_ip_align(priv->dev,
+ frame_len);
+ if (unlikely(!skb)) {
+ if (net_ratelimit())
+ dev_warn(priv->device,
+ "packet dropped\n");
+ priv->dev->stats.rx_dropped++;
+ break;
+ }
+
+ dma_sync_single_for_cpu(priv->device,
+ priv->rx_skbuff_dma
+ [entry], frame_len,
+ DMA_FROM_DEVICE);
+ skb_copy_to_linear_data(skb,
+ priv->
+ rx_skbuff[entry]->data,
+ frame_len);
+
+ skb_put(skb, frame_len);
+ dma_sync_single_for_device(priv->device,
+ priv->rx_skbuff_dma
+ [entry], frame_len,
+ DMA_FROM_DEVICE);
+ } else {
+ skb = priv->rx_skbuff[entry];
+ if (unlikely(!skb)) {
+ pr_err("%s: Inconsistent Rx chain\n",
+ priv->dev->name);
+ priv->dev->stats.rx_dropped++;
+ break;
+ }
+ prefetch(skb->data - NET_IP_ALIGN);
+ priv->rx_skbuff[entry] = NULL;
+
+ skb_put(skb, frame_len);
+ dma_unmap_single(priv->device,
+ priv->rx_skbuff_dma[entry],
+ priv->dma_buf_sz,
+ DMA_FROM_DEVICE);
}
- prefetch(skb->data - NET_IP_ALIGN);
- priv->rx_skbuff[entry] = NULL;
stmmac_get_rx_hwtstamp(priv, entry, skb);
- skb_put(skb, frame_len);
- dma_unmap_single(priv->device,
- priv->rx_skbuff_dma[entry],
- priv->dma_buf_sz, DMA_FROM_DEVICE);
-
if (netif_msg_pktdata(priv)) {
pr_debug("frame received (%dbytes)", frame_len);
print_pkt(skb->data, frame_len);
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists