[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1452107487-475-8-git-send-email-andrew@lunn.ch>
Date: Wed, 6 Jan 2016 20:11:12 +0100
From: Andrew Lunn <andrew@...n.ch>
To: David Miller <davem@...emloft.net>
Cc: Florian Fainelli <f.fainelli@...il.com>,
netdev <netdev@...r.kernel.org>, Andrew Lunn <andrew@...n.ch>
Subject: [PATCHv2 net-next 07/22] phy: phy_{read|write}_mmd_indirect: get addr from phydev
The address of the device can be determined from the phydev structure,
rather than passing it as a parameter.
Signed-off-by: Andrew Lunn <andrew@...n.ch>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
---
drivers/net/phy/bcm-phy-lib.c | 8 ++++----
drivers/net/phy/dp83867.c | 6 +++---
drivers/net/phy/microchip.c | 5 ++---
drivers/net/phy/phy.c | 36 ++++++++++++++----------------------
include/linux/phy.h | 7 ++-----
5 files changed, 25 insertions(+), 37 deletions(-)
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index ddb377e53633..df0416db0b88 100644
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -184,25 +184,25 @@ int bcm_phy_enable_eee(struct phy_device *phydev)
/* Enable EEE at PHY level */
val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
- MDIO_MMD_AN, phydev->addr);
+ MDIO_MMD_AN);
if (val < 0)
return val;
val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
- MDIO_MMD_AN, phydev->addr, (u32)val);
+ MDIO_MMD_AN, (u32)val);
/* Advertise EEE */
val = phy_read_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV,
- MDIO_MMD_AN, phydev->addr);
+ MDIO_MMD_AN);
if (val < 0)
return val;
val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
phy_write_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV,
- MDIO_MMD_AN, phydev->addr, (u32)val);
+ MDIO_MMD_AN, (u32)val);
return 0;
}
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 4ebf601073d9..e4c0b0c0af02 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -160,7 +160,7 @@ static int dp83867_config_init(struct phy_device *phydev)
if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) &&
(phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) {
val = phy_read_mmd_indirect(phydev, DP83867_RGMIICTL,
- DP83867_DEVADDR, phydev->addr);
+ DP83867_DEVADDR);
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
val |= (DP83867_RGMII_TX_CLK_DELAY_EN | DP83867_RGMII_RX_CLK_DELAY_EN);
@@ -172,13 +172,13 @@ static int dp83867_config_init(struct phy_device *phydev)
val |= DP83867_RGMII_RX_CLK_DELAY_EN;
phy_write_mmd_indirect(phydev, DP83867_RGMIICTL,
- DP83867_DEVADDR, phydev->addr, val);
+ DP83867_DEVADDR, val);
delay = (dp83867->rx_id_delay |
(dp83867->tx_id_delay << DP83867_RGMII_TX_CLK_DELAY_SHIFT));
phy_write_mmd_indirect(phydev, DP83867_RGMIIDCTL,
- DP83867_DEVADDR, phydev->addr, delay);
+ DP83867_DEVADDR, delay);
}
return 0;
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index c0a20ebd083b..99df5bc47424 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -78,10 +78,9 @@ static int lan88xx_probe(struct phy_device *phydev)
priv->wolopts = 0;
/* these values can be used to identify internal PHY */
- priv->chip_id = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_ID,
- 3, phydev->addr);
+ priv->chip_id = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_ID, 3);
priv->chip_rev = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_REV,
- 3, phydev->addr);
+ 3);
phydev->priv = priv;
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 9771941cf0ee..56c8dd8c0c85 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1029,7 +1029,6 @@ static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
* @phydev: The PHY device bus
* @prtad: MMD Address
* @devad: MMD DEVAD
- * @addr: PHY address on the MII bus
*
* Description: it reads data from the MMD registers (clause 22 to access to
* clause 45) of the specified phy address.
@@ -1039,10 +1038,10 @@ static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
* 3) Write reg 13 // MMD Data Command for MMD DEVAD
* 3) Read reg 14 // Read MMD data
*/
-int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
- int devad, int addr)
+int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, int devad)
{
struct phy_driver *phydrv = phydev->drv;
+ int addr = phydev->addr;
int value = -1;
if (!phydrv->read_mmd_indirect) {
@@ -1066,7 +1065,6 @@ EXPORT_SYMBOL(phy_read_mmd_indirect);
* @phydev: The PHY device
* @prtad: MMD Address
* @devad: MMD DEVAD
- * @addr: PHY address on the MII bus
* @data: data to write in the MMD register
*
* Description: Write data from the MMD registers of the specified
@@ -1078,9 +1076,10 @@ EXPORT_SYMBOL(phy_read_mmd_indirect);
* 3) Write reg 14 // Write MMD data
*/
void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
- int devad, int addr, u32 data)
+ int devad, u32 data)
{
struct phy_driver *phydrv = phydev->drv;
+ int addr = phydev->addr;
if (!phydrv->write_mmd_indirect) {
struct mii_bus *bus = phydev->bus;
@@ -1130,7 +1129,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
/* First check if the EEE ability is supported */
eee_cap = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE,
- MDIO_MMD_PCS, phydev->addr);
+ MDIO_MMD_PCS);
if (eee_cap <= 0)
goto eee_exit_err;
@@ -1142,12 +1141,12 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
* the EEE advertising registers.
*/
eee_lp = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE,
- MDIO_MMD_AN, phydev->addr);
+ MDIO_MMD_AN);
if (eee_lp <= 0)
goto eee_exit_err;
eee_adv = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
- MDIO_MMD_AN, phydev->addr);
+ MDIO_MMD_AN);
if (eee_adv <= 0)
goto eee_exit_err;
@@ -1161,15 +1160,13 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
* clock while it is signaling LPI.
*/
int val = phy_read_mmd_indirect(phydev, MDIO_CTRL1,
- MDIO_MMD_PCS,
- phydev->addr);
+ MDIO_MMD_PCS);
if (val < 0)
return val;
val |= MDIO_PCS_CTRL1_CLKSTOP_EN;
phy_write_mmd_indirect(phydev, MDIO_CTRL1,
- MDIO_MMD_PCS, phydev->addr,
- val);
+ MDIO_MMD_PCS, val);
}
return 0; /* EEE supported */
@@ -1188,8 +1185,7 @@ EXPORT_SYMBOL(phy_init_eee);
*/
int phy_get_eee_err(struct phy_device *phydev)
{
- return phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_WK_ERR,
- MDIO_MMD_PCS, phydev->addr);
+ return phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_WK_ERR, MDIO_MMD_PCS);
}
EXPORT_SYMBOL(phy_get_eee_err);
@@ -1206,22 +1202,19 @@ int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
int val;
/* Get Supported EEE */
- val = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE,
- MDIO_MMD_PCS, phydev->addr);
+ val = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE, MDIO_MMD_PCS);
if (val < 0)
return val;
data->supported = mmd_eee_cap_to_ethtool_sup_t(val);
/* Get advertisement EEE */
- val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
- MDIO_MMD_AN, phydev->addr);
+ val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN);
if (val < 0)
return val;
data->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
/* Get LP advertisement EEE */
- val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE,
- MDIO_MMD_AN, phydev->addr);
+ val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE, MDIO_MMD_AN);
if (val < 0)
return val;
data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
@@ -1241,8 +1234,7 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
{
int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
- phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN,
- phydev->addr, val);
+ phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, val);
return 0;
}
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 5f5cc3424b9e..08198ce98773 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -629,14 +629,12 @@ static inline int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
* phy_read_mmd_indirect - reads data from the MMD registers
* @phydev: The PHY device bus
* @prtad: MMD Address
- * @devad: MMD DEVAD
* @addr: PHY address on the MII bus
*
* Description: it reads data from the MMD registers (clause 22 to access to
* clause 45) of the specified phy address.
*/
-int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
- int devad, int addr);
+int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, int devad);
/**
* phy_read - Convenience function for reading a given PHY register
@@ -735,14 +733,13 @@ static inline int phy_write_mmd(struct phy_device *phydev, int devad,
* @phydev: The PHY device
* @prtad: MMD Address
* @devad: MMD DEVAD
- * @addr: PHY address on the MII bus
* @data: data to write in the MMD register
*
* Description: Write data from the MMD registers of the specified
* phy address.
*/
void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
- int devad, int addr, u32 data);
+ int devad, u32 data);
struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
bool is_c45,
--
2.6.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists