lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 03 Feb 2016 02:26:26 -0800
From:	John Fastabend <john.fastabend@...il.com>
To:	"Amir Vadai\"" <amir@...ai.me>
CC:	ogerlitz@...lanox.com, jiri@...nulli.us, jhs@...atatu.com,
	jeffrey.t.kirsher@...el.com, netdev@...r.kernel.org,
	davem@...emloft.net
Subject: Re: [net-next PATCH 7/7] net: ixgbe: add support for tc_u32 offload

On 16-02-03 02:07 AM, Amir Vadai" wrote:
> On Wed, Feb 03, 2016 at 01:29:59AM -0800, John Fastabend wrote:
>> This adds initial support for offloading the u32 tc classifier. This
>> initial implementation only implements a few base matches and actions
>> to illustrate the use of the infrastructure patches.
>>
>> However it is an interesting subset because it handles the u32 next
>> hdr logic to correctly map tcp packets from ip headers using the ihl
>> and protocol fields. After this is accepted we can extend the match
>> and action fields easily by updating the model header file.
>>
>> Also only the drop action is supported initially.
>>
>> Here is a short test script,
>>
>>  #tc qdisc add dev eth4 ingress
>>  #tc filter add dev eth4 parent ffff: protocol ip \
>> 	u32 ht 800: order 1 \
>> 	match ip dst 15.0.0.1/32 match ip src 15.0.0.2/32 action drop
>>
>> <-- hardware has dst/src ip match rule installed -->
>>
>>  #tc filter del dev eth4 parent ffff: prio 49152
>>  #tc filter add dev eth4 parent ffff: protocol ip prio 99 \
>> 	handle 1: u32 divisor 1
>>  #tc filter add dev eth4 protocol ip parent ffff: prio 99 \
>> 	u32 ht 800: order 1 link 1: \
>> 	offset at 0 mask 0f00 shift 6 plus 0 eat match ip protocol 6 ff
>>  #tc filter add dev eth4 parent ffff: protocol ip \
>> 	u32 ht 1: order 3 match tcp src 23 ffff action drop
>>
>> <-- hardware has tcp src port rule installed -->
>>
>>  #tc qdisc del dev eth4 parent ffff:
>>
>> <-- hardware cleaned up -->
>>
>> Signed-off-by: John Fastabend <john.r.fastabend@...el.com>
>> ---
>>  drivers/net/ethernet/intel/ixgbe/ixgbe.h         |    3 
>>  drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c |    6 -
>>  drivers/net/ethernet/intel/ixgbe/ixgbe_main.c    |  196 ++++++++++++++++++++++
>>  3 files changed, 198 insertions(+), 7 deletions(-)
>>
> 
> What are you doing w.r.t priorities? Are the filters processed by the
> order of the priorities?
> 

The rules are put in order by the handles which is populated in
my command above such that 'ht 1: order 3' gives handle 1::3 and
'ht 800: order 1' gives 800::1. Take a look at this block in cls_u32

        if (err == 0) {
                struct tc_u_knode __rcu **ins;
                struct tc_u_knode *pins;

                ins = &ht->ht[TC_U32_HASH(handle)];
                for (pins = rtnl_dereference(*ins); pins;
                     ins = &pins->next, pins = rtnl_dereference(*ins))
                        if (TC_U32_NODE(handle) < TC_U32_NODE(pins->handle))
                                break;

                RCU_INIT_POINTER(n->next, pins);
                rcu_assign_pointer(*ins, n);
                u32_replace_hw_knode(tp, n);
                *arg = (unsigned long)n;
                return 0;


If you leave ht and order off the tc cli I believe 'tc' just
picks some semi-arbitrary ones for you. I've been in the habit
of always specifying them even for software filters.

[...]

>>  
>> +#include <net/tc_act/tc_gact.h>
>> +#include "ixgbe_model.h"
> Did you leave those #include's in the middle of the file on purpose?
> 
> [...]
> 

Probably bad form I'll move it to the top with the other header files.

Thanks!

Powered by blists - more mailing lists