netdev - RE: bonding reports interface up with 0 Mbps

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <87618083B2453E4A8714035B62D6799250524B75@FMSMSX105.amr.corp.intel.com>
Date:	Fri, 5 Feb 2016 00:43:20 +0000
From:	"Tantilov, Emil S" <emil.s.tantilov@...el.com>
To:	Jay Vosburgh <jay.vosburgh@...onical.com>
CC:	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"gospo@...ulusnetworks.com" <gospo@...ulusnetworks.com>,
	zhuyj <zyjzyj2000@...il.com>,
	"jiri@...lanox.com" <jiri@...lanox.com>
Subject: RE: bonding reports interface up with 0 Mbps

>-----Original Message-----
>From: Jay Vosburgh [mailto:jay.vosburgh@...onical.com]
>Sent: Thursday, February 04, 2016 4:37 PM
>To: Tantilov, Emil S
>Cc: netdev@...r.kernel.org; gospo@...ulusnetworks.com; zhuyj;
>jiri@...lanox.com
>Subject: Re: bonding reports interface up with 0 Mbps
>
>Jay Vosburgh <jay.vosburgh@...onical.com> wrote:
>[...]
>>	Thinking about the trace again... Emil: what happens in the
>>trace before this?  Is there ever a call to the ixgbe_get_settings?
>>Does a NETDEV_UP or NETDEV_CHANGE event ever hit the bond_netdev_event
>>function?
>
>	Emil kindly sent me the trace offline, and I think I see what's
>going on.  It looks like the sequence of events is:
>
>bond_enslave ->
>	bond_update_speed_duplex (device is down, thus DUPLEX/SPEED_UNKNOWN)
>	[ do rest of enslavement, start miimon periodic work ]
>
>	[ time passes, device goes carrier up ]
>
>ixgbe_service_task: eth1: NIC Link is Up 10 Gbps ->
>	netif_carrier_on (arranges for NETDEV_CHANGE notifier out of line)
>
>	[ a few microseconds later ]
>
>bond_mii_monitor ->
>	bond_check_dev_link	(now is carrier up)
>	bond_miimon_commit ->	(emits "0 Mbps full duplex" message)
>		bond_lower_state_changed ->
>			bond_netdev_event (NETDEV_CHANGELOWERSTATE, is ignored)
>		bond_3ad_handle_link_change	(sees DUPLEX/SPEED_UNKNOWN)
>
>	[ a few microseconds later, in response to ixgbe's netif_carrier_on ]
>
>notifier_call_chain ->
>	bond_netdev_event NETDEV_CHANGE ->
>		bond_update_speed_duplex (sees correct SPEED_10000/FULL) ->
>			bond_3ad_adapter_speed_duplex_changed (updates 802.3ad)
>
>	Basically, the race is that the periodic bond_mii_monitor is
>squeezing in between the link going up and bonding's update of the speed
>and duplex in response to the NETDEV_CHANGE triggered by the driver's
>netif_carrier_on call.  bonding ends up using the stale duplex and speed
>information obtained at enslavement time.
>
>	I think that, nowadays, the initial speed and duplex will pretty
>much always be UNKNOWN, at least for real Ethernet devices, because it
>will take longer to autoneg than the time between the dev_open and
>bond_update_speed_duplex calls in bond_enslave.
>
>	Adding a case to bond_netdev_event for CHANGELOWERSTATE works
>because it's a synchronous call from bonding.  For purposes of fixing
>this, it's more or less equivalent to calling bond_update_speed_duplex
>from bond_miimon_commit (which is part of a test patch I posted earlier
>today).
>
>	If the above analysis is correct, then I would expect this patch
>to make the problem go away:
>
>diff --git a/drivers/net/bonding/bond_main.c
>b/drivers/net/bonding/bond_main.c
>index 56b560558884..cabaeb61333d 100644
>--- a/drivers/net/bonding/bond_main.c
>+++ b/drivers/net/bonding/bond_main.c
>@@ -2127,6 +2127,7 @@ static void bond_miimon_commit(struct bonding *bond)
> 			continue;
>
> 		case BOND_LINK_UP:
>+			bond_update_speed_duplex(slave);
> 			bond_set_slave_link_state(slave, BOND_LINK_UP,
> 						  BOND_SLAVE_NOTIFY_NOW);
> 			slave->last_link_up = jiffies;
>
>
>	Emil, can you give just the above a test?

Sure I'll fire it up.

Thanks,
Emil