netdev - Re: [PATCH v2 6/6] dt-bindings: net: ks8995: add bindings documentation for ks8995

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <56B9C2EE.6060105@cogentembedded.com>
Date:	Tue, 9 Feb 2016 13:43:58 +0300
From:	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To:	Helmut Buchsbaum <helmut.buchsbaum@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Florian Fainelli <f.fainelli@...il.com>,
	Andrew Lunn <andrew@...n.ch>
Cc:	netdev@...r.kernel.org
Subject: Re: [PATCH v2 6/6] dt-bindings: net: ks8995: add bindings
 documentation for ks8995

On 2/9/2016 11:07 AM, Helmut Buchsbaum wrote:

>>> Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@...il.com>
>>> ---
>>>   .../devicetree/bindings/net/micrel-ks8995.txt        | 20
>>> ++++++++++++++++++++
>>>   1 file changed, 20 insertions(+)
>>>   create mode 100644
>>> Documentation/devicetree/bindings/net/micrel-ks8995.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/net/micrel-ks8995.txt
>>> b/Documentation/devicetree/bindings/net/micrel-ks8995.txt
>>> new file mode 100644
>>> index 0000000..7f11ca6
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/net/micrel-ks8995.txt
>>> @@ -0,0 +1,20 @@
>>> +Micrel KS8995 SPI controlled Ethernet Switch families
>>> +
>>> +Required properties (according to spi-bus.txt):
>>> +- compatible: either "micrel,ks8995", "micrel,ksz8864" or
>>> "micrel,ksz8795"
>>> +
>>> +Optional properties:
>>> +- reset-gpios : phandle of gpio that will be used to reset chip
>>> during probe
>>> +
>>> +Example:
>>> +
>>> +spi-master {
>>> +    ...
>>> +    ksz8795 {
>>
>>     ePAPR tells to name the nodes generically, according to their function.
>>
>>> +        compatible = "micrel,ksz8795";
>>> +
>>> +        reg = <0>;
>>> +        spi-max-frequency = <50000000>;
>>> +        reset-gpios = <&gpio0 46 1>;
>>> +    };
>>> +};
>>
>> MBR, Sergei
>>
> Hello Sergei,
>
> just to avoid any misunderstandings: you refer to ePAPR, ch. 2.2.1 Node Names.

    "2.2.2, Generic Names Recommendation", actually. :-)

> Your definitely right, I'll correct the naming in my example!

    TIA.

> Thanks,
> Helmut

MBR, Sergei