[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1455047238-111358-1-git-send-email-helmut.buchsbaum@gmail.com>
Date: Tue, 9 Feb 2016 20:47:12 +0100
From: Helmut Buchsbaum <helmut.buchsbaum@...il.com>
To: "David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
Cc: netdev@...r.kernel.org,
Helmut Buchsbaum <helmut.buchsbaum@...il.com>
Subject: [PATCH v3 0/6] Add support for MICREL KSZ8795CLX 5-port switch
This patch series refactors the spi-ks8995 driver to finally add support
for the MICREL KSZ8795CLX. Additionally support for controlling a GPIO
line for resetting the switch is added.
Helmut
Changes since v2:
- use GPIO_ACTIVE_LOW according to Andrew's remark.
- use ePAPR compliant node name in example, thanks to Sergei for
pointing out
Changes since v1:
- removed initializing registers from Device Tree following Florian's
advice
- fixed GPIO handling for reset according to Andrew's remark.
Helmut Buchsbaum (6):
net: phy: spi_ks8995: introduce spi_device_id table
net: phy: spi_ks8995: verify chip and determine revision
net: phy: spi_ks8995: add support for resetting switch using GPIO
net: phy: spi_ks8995: generalize creation of SPI commands
net: phy: spi_ks8995: add support for MICREL KSZ8795CLX
dt-bindings: net: ks8995: add bindings documentation for ks8995
.../devicetree/bindings/net/micrel-ks8995.txt | 20 ++
drivers/net/phy/spi_ks8995.c | 304 +++++++++++++++++----
2 files changed, 265 insertions(+), 59 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/micrel-ks8995.txt
--
2.1.4
Powered by blists - more mailing lists