netdev - Re: [PATCH net v2] bonding: Fix ARP monitor validation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <20160213.055517.692667015750288172.davem@davemloft.net>
Date:	Sat, 13 Feb 2016 05:55:17 -0500 (EST)
From:	David Miller <davem@...emloft.net>
To:	jay.vosburgh@...onical.com
Cc:	netdev@...r.kernel.org, vfalico@...il.com,
	gospo@...ulusnetworks.com
Subject: Re: [PATCH net v2] bonding: Fix ARP monitor validation

From: Jay Vosburgh <jay.vosburgh@...onical.com>
Date: Tue, 02 Feb 2016 13:35:56 -0800

> 
> 	The current logic in bond_arp_rcv will accept an incoming ARP for
> validation if (a) the receiving slave is either "active" (which includes
> the currently active slave, or the current ARP slave) or, (b) there is a
> currently active slave, and it has received an ARP since it became active.
> For case (b), the receiving slave isn't the currently active slave, and is
> receiving the original broadcast ARP request, not an ARP reply from the
> target.
> 
> 	This logic can fail if there is no currently active slave.  In
> this situation, the ARP probe logic cycles through all slaves, assigning
> each in turn as the "current_arp_slave" for one arp_interval, then setting
> that one as "active," and sending an ARP probe from that slave.  The
> current logic expects the ARP reply to arrive on the sending
> current_arp_slave, however, due to switch FDB updating delays, the reply
> may be directed to another slave.
> 
> 	This can arise if the bonding slaves and switch are working, but
> the ARP target is not responding.  When the ARP target recovers, a
> condition may result wherein the ARP target host replies faster than the
> switch can update its forwarding table, causing each ARP reply to be sent
> to the previous current_arp_slave.  This will never pass the logic in
> bond_arp_rcv, as neither of the above conditions (a) or (b) are met.
> 
> 	Some experimentation on a LAN shows ARP reply round trips in the
> 200 usec range, but my available switches never update their FDB in less
> than 4000 usec.
> 
> 	This patch changes the logic in bond_arp_rcv to additionally
> accept an ARP reply for validation on any slave if there is a current ARP
> slave and it sent an ARP probe during the previous arp_interval.
> 
> Fixes: aeea64ac717a ("bonding: don't trust arp requests unless active slave really works")
> Cc: Veaceslav Falico <vfalico@...il.com>
> Cc: Andy Gospodarek <gospo@...ulusnetworks.com>
> Signed-off-by: Jay Vosburgh <jay.vosburgh@...onical.com>

Applied, thanks Jay.