netdev - Re: [PATCH] phy: marvell: Fix reg-init bug on 88E1510

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20160214232125.GA17835@archie.tuxnet.lan>
Date:	Mon, 15 Feb 2016 00:21:26 +0100
From:	Clemens Gruber <clemens.gruber@...ruber.com>
To:	Andrew Lunn <andrew@...n.ch>
Cc:	netdev@...r.kernel.org, Florian Fainelli <f.fainelli@...il.com>,
	linux-kernel@...r.kernel.org,
	"David S . Miller" <davem@...emloft.net>
Subject: Re: [PATCH] phy: marvell: Fix reg-init bug on 88E1510

On Sun, Feb 14, 2016 at 09:48:22PM +0100, Andrew Lunn wrote:
> On Sun, Feb 14, 2016 at 09:31:25PM +0100, Clemens Gruber wrote:
> > The function marvell_of_reg_init was called too late, in
> > m88e1510_config_aneg. This function was not reached, due to the phy
> > state machine being stuck at waiting for interrupts (which were not
> > enabled and off by default on the 88E1510)
> > It lead to the ethernet link not coming up at boot.
> > 
> > This commit moves the call of marvell_of_reg_init to config_init.
> > Now, a marvell,reg-init option to enable PHY interrupts on pin LED[2] is
> > set early on and the phy state machine does not get stuck anymore.
> > Tested on i.MX6Q boards with Marvell 88E1510 PHYs.
> 
> This looks like a good fix for you board. But maybe we should look at
> the bigger picture. How about calling your new 
> 
> > +static int m88e1510_config_init(struct phy_device *phydev)
> > +{
> > +	int err;
> > +
> > +	err = marvell_of_reg_init(phydev);
> > +	if (err < 0)
> > +		return err;
> > +
> > +	return 0;
> > +}
> 
> marvell_config_init() and adding it to all PHYs which don't have a
> specific config_init function.
> 
> We then get more consistent behaviour across Marvell PHYs.

Sounds good. I'll send a new patch tomorrow!

Thanks,
Clemens