netdev - Re: [PATCH 1/4] net: ethernet: dwmac: add Ethernet glue logic for stm32 chip

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAJgp7zxYhbQ4yQHBB3cu50TU9N9xvk3HxCp0NP5fxFbxrMsD_g@mail.gmail.com>
Date:	Tue, 23 Feb 2016 10:59:15 +0100
From:	Alexandre Torgue <alexandre.torgue@...il.com>
To:	Joachim Eastwood <manabian@...il.com>
Cc:	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	Giuseppe Cavallaro <peppe.cavallaro@...com>,
	netdev <netdev@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/4] net: ethernet: dwmac: add Ethernet glue logic for
 stm32 chip

2016-02-22 22:52 GMT+01:00 Joachim  Eastwood <manabian@...il.com>:
> On 22 February 2016 at 15:50, Alexandre Torgue
> <alexandre.torgue@...il.com> wrote:
>> 2016-02-13 14:48 GMT+01:00 Joachim  Eastwood <manabian@...il.com>:
>>> On 3 February 2016 at 15:54, Alexandre TORGUE
>>> <alexandre.torgue@...il.com> wrote:
>>>> +       plat_dat->bsp_priv = dwmac;
>>>> +       plat_dat->init = stm32_dwmac_init;
>>>> +       plat_dat->exit = stm32_dwmac_exit;
>>>
>>> Instead of using these callbacks could you rather implement the PM
>>> callbacks directly in this driver?
>>> I don't think it should add much code and it will make it look more
>>> like standard driver. This will also give you some more control and
>>> flexibility in your code.
>>
>> I prefer to keep the code as it is. Glue layer is directly linked to
>> stmmac driver and I don't want to brake the link between the glue and
>> the stmmac driver.
>
> What do you mean by break the link?
>

I thought that you wanted to split stmmac_pltfr_supend (glue part and
stmamc part), but I well understood it is not the case (sorry for
mistake).

> There has been numerous of patch sets to make the stmmac "glue"
> drivers into more standard platform drivers.
> http://marc.info/?l=linux-netdev&m=143159850631093&w=2
> http://marc.info/?l=linux-netdev&m=143708560009851&w=2
> http://marc.info/?l=linux-netdev&m=143812136600541&w=2
>
> Do you see any advantage by using the init and exit hooks in your
> driver instead of using the standard driver PM callbacks and remove
> function?
> The only "cost" I see is slightly more boilerplate code. But since you
> already have init/exit functions you could easily make them into PM
> resume/suspend so I doubt there would be much increase in code size.
>

If I well understood you want to continue the stmmac glue driver
rework by moving stmmac_pltfr_suspend/resume/remove in each glue
driver (stm32, sun, sti ....).
Each glue driver will call directly stmmac_suspend/resume/remove and
their own init/exit function.
If it is what you meant, I can do it.

> One other thing;
> Do you need to have the PHY mode setup code in the init function which
> is called each time on resume?

I can't guarantee that after a suspend the sysconfig register will
contain same data than before suspend.

Best regards.

Alex

> If you could move it to probe you could drop the interface priv data
> member and use plat_dat->interface as stmmac_probe_config_dt() has
> already done of_get_phy_mode().
>
>
> regards,
> Joachim Eastwood