netdev - Re: wlcore: Fix regression in wlcore_set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CANfgCY0a843dUG_ssJ-PP70F8MAROrvKOQe9cH0GewnShV8tqg@mail.gmail.com>
Date:	Thu, 25 Feb 2016 13:13:55 +1100
From:	Ross Green <rgkernel@...il.com>
To:	Emil Goode <emil.fsw@...de.io>
Cc:	Kalle Valo <kvalo@...eaurora.org>, Shahar Patury <shaharp@...com>,
	Guy Mishol <guym@...com>,
	Igor Grinberg <grinberg@...pulab.co.il>,
	Uri Mashiach <uri.mashiach@...pulab.co.il>,
	linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
	lkml <linux-kernel@...r.kernel.org>
Subject: Re: wlcore: Fix regression in wlcore_set_partition()

On Thu, Feb 25, 2016 at 11:11 AM, Emil Goode <emil.fsw@...de.io> wrote:
> Hello Ross
>
> On Wed, Feb 24, 2016 at 04:40:50PM +1100, Ross Green wrote:
>> On Wed, Feb 17, 2016 at 4:34 PM, Ross Green <rgkernel@...il.com> wrote:
>> > Appreciate your efforts!
>> >
>> > Just trying to make sure it does not get lost.
>> > Introduced in rc1, not fixed by ... rc4.
>> >
>> > Anyway, I will continue to test, lots of other things still to chase
>> > even in rc4!
>> >
>> > Regards,
>> >
>> > Ross Green
>> >
>> > On Wed, Feb 17, 2016 at 2:24 AM, Kalle Valo <kvalo@...eaurora.org> wrote:
>> >> Ross Green <rgkernel@...il.com> writes:
>> >>
>> >>> On Fri, Feb 12, 2016 at 8:45 PM, Kalle Valo <kvalo@...eaurora.org> wrote:
>> >>>>
>> >>>>> The commit 3719c17e1816 ("wlcore/wl18xx: fw logger over sdio") introduced a
>> >>>>> regression causing the wlcore to time out and go into recovery. Reverting the
>> >>>>> changes regarding write of the last partition size brings the module back to
>> >>>>> it's functional state.
>> >>>>>
>> >>>>> Fixes: 3719c17e1816 ("wlcore/wl18xx: fw logger over sdio")
>> >>>>> Reported-by: Ross Green <rgkernel@...il.com>
>> >>>>> Signed-off-by: Emil Goode <emil.fsw@...de.io>
>> >>>>> [kvalo@...eaurora.org: improved commit log]
>> >>>>
>> >>>> Thanks, applied to wireless-drivers.git.
>> >>>>
>> >>>> Kalle Valo
>> >>>
>> >>> I just tested linux-4.5-rc4 it appears the above fix missed the release for rc4!
>> >>> So the behaviour of firmware reset being called after the access of
>> >>> the last partition timesout.
>> >>>
>> >>> Again tested patch with the new release - 4.5-rc4 and found everything
>> >>> to work as expected again.
>> >>>
>> >>> So Hopefully for rc5 - Please!
>> >>
>> >> It takes some time to get patches into Linus' tree. And being in a
>> >> conference and then getting sick is not really helping. I'm not sure if
>> >> this patch makes to rc5 on time, but I'll try.
>> >>
>> >> --
>> >> Kalle Valo
>>
>> G'day all,
>>
>> I have tested Emil's patch with each 4.5-rc release.
>>
>> Seems to work fine with rc2, rc3, rc4.
>> I tried it with rc5 and get the following output from dmesg see attachment.
>>
>> So it looks like there is a reset that it recovers from and then proceeds OK.
>>
>> I see the patch has been queued by David Miller so it might make it into rc6.
>> That will be great. It still does not look quite as clean as it should
>> be however, given the noise in the dmesg output from rc5
>>
>> Regards,
>>
>>
>> Ross Green
>
> I'm unable to reproduce that ELP wakeup timeout with v4.5-rc5 on my pandaboard es.
> Can you easily reproduce it and are you able to reproduce it with commit 3719c17e1816 reverted?
>
> However, I'm seeing another bug that occurs when the wlan is not configured to connect to
> an AP directly after boot (dmesg attached). It is not related to any recent changes and goes back
> before the 3.14 kernel. There seem to be an issue with the looped IRQ handling implementation.
> A scan on 2GHZ is performed and the wlcore_fw_status() call in wlcore_irq_locked() returns
> WL1271_ACX_INTR_HW_AVAILABLE, then nothing seem to happen until the delayed work queue
> scan_complete_work starts executing after the 30 sec timeout runs out and the wlcore goes into
> recovery. I guess a new scan should be initiated after wlcore_fw_status() return hw available,
> does anyone have input on that?
>
> Best regards,
>
> Emil Goode


Sorry Emil had not tried a reboot since getting that message. The wifi
module did recover and associate properly after that. So I just kept
on using the system.

Trying to track down another problem that takes "AGES" before it shows
up so just kept the system running. Hoping to get some debug regarding
and RCU problem.

I will check it again later when i get a chance to reboot.

At least with your patch in place the system will keep functioning.
Plus I had not noticed any problems running rc2, rc3, rc4 with your
patch in place.
Everything behaved pre the 4.5 changes.

I'll get back to you with what I find. It does look however that there
might be some other problems sitting there that possibly the new
changes show up more. Some slightly different timing situations.

Regards,

Ross Green