netdev - [net-next v2 03/15] e1000e: Set HW FIFO minimum pointer gap for non-gig speeds

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1456366502-132841-4-git-send-email-jeffrey.t.kirsher@intel.com>
Date:	Wed, 24 Feb 2016 18:14:50 -0800
From:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:	davem@...emloft.net
Cc:	Raanan Avargil <raanan.avargil@...el.com>, netdev@...r.kernel.org,
	nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next v2 03/15] e1000e: Set HW FIFO minimum pointer gap for non-gig speeds

From: Raanan Avargil <raanan.avargil@...el.com>

Based on feedback from HW team, the configured value of the internal PHY
HW FIFO pointer gap was incorrect for non-gig speeds.
This patch provides the correct configuration.

Signed-off-by: Raanan Avargil <raanan.avargil@...el.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 786d214..e7ccf5f 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1479,6 +1479,18 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 				hw->phy.ops.release(hw);
 				if (ret_val)
 					return ret_val;
+			} else {
+				ret_val = hw->phy.ops.acquire(hw);
+				if (ret_val)
+					return ret_val;
+
+				ret_val = e1e_wphy_locked(hw,
+							  PHY_REG(776, 20),
+							  0xC023);
+				hw->phy.ops.release(hw);
+				if (ret_val)
+					return ret_val;
+
 			}
 		}
 	}
-- 
2.5.0