| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1456504351-18871-8-git-send-email-jiri@resnulli.us>
Date: Fri, 26 Feb 2016 17:32:29 +0100
From: Jiri Pirko <jiri@...nulli.us>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, idosch@...lanox.com, eladr@...lanox.com,
yotamg@...lanox.com, ogerlitz@...lanox.com, yishaih@...lanox.com,
dledford@...hat.com, sean.hefty@...el.com,
hal.rosenstock@...il.com, eugenia@...lanox.com,
roopa@...ulusnetworks.com, nikolay@...ulusnetworks.com,
hadarh@...lanox.com, jhs@...atatu.com, john.fastabend@...il.com,
jeffrey.t.kirsher@...el.com, brouer@...hat.com, ivecera@...hat.com,
rami.rosen@...el.com, hannes@...essinduktion.org,
gospo@...ulusnetworks.com
Subject: [patch net-next v3 7/9] mlxsw: spectrum: Store local port to module mapping during init
From: Ido Schimmel <idosch@...lanox.com>
The port netdevs are each associated with a different local port number
in the device. These local ports are grouped into groups of 4 (e.g.
(1-4), (5-8)) called clusters. The cluster constitutes the one of two
possible modules they can be mapped to. This mapping is board-specific
and done by the device's firmware during init.
When splitting a port by 4, the device requires us to first unmap all
the ports in the cluster and then map each to a single lane in the module
associated with the port netdev used as the handle for the operation.
This means that two port netdevs will disappear, as only 100Gb/s (4
lanes) ports can be split and we are guaranteed to have two of these
((1, 3), (5, 7) etc.) in a cluster.
When unsplit occurs we need to reinstantiate the two original 100Gb/s
ports and map each to its origianl module. Therefore, during driver init
store the initial local port to module mapping, so it can be used later
during unsplitting.
Note that a by 2 split doesn't require us to store the mapping, as we
only need to reinstantiate one port whose module is known.
Signed-off-by: Ido Schimmel <idosch@...lanox.com>
Signed-off-by: Jiri Pirko <jiri@...lanox.com>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 36 +++++++++++---------------
drivers/net/ethernet/mellanox/mlxsw/spectrum.h | 1 +
2 files changed, 16 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 0dd72f8..240881c 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -305,18 +305,19 @@ mlxsw_sp_port_system_port_mapping_set(struct mlxsw_sp_port *mlxsw_sp_port)
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sspr), sspr_pl);
}
-static int mlxsw_sp_port_module_check(struct mlxsw_sp_port *mlxsw_sp_port,
- bool *p_usable)
+static int mlxsw_sp_port_module_info_get(struct mlxsw_sp *mlxsw_sp,
+ u8 local_port, u8 *p_module,
+ u8 *p_width)
{
- struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
char pmlp_pl[MLXSW_REG_PMLP_LEN];
int err;
- mlxsw_reg_pmlp_pack(pmlp_pl, mlxsw_sp_port->local_port);
+ mlxsw_reg_pmlp_pack(pmlp_pl, local_port);
err = mlxsw_reg_query(mlxsw_sp->core, MLXSW_REG(pmlp), pmlp_pl);
if (err)
return err;
- *p_usable = mlxsw_reg_pmlp_width_get(pmlp_pl) ? true : false;
+ *p_module = mlxsw_reg_pmlp_module_get(pmlp_pl, 0);
+ *p_width = mlxsw_reg_pmlp_width_get(pmlp_pl);
return 0;
}
@@ -1365,7 +1366,6 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port)
struct mlxsw_sp_port *mlxsw_sp_port;
struct devlink_port *devlink_port;
struct net_device *dev;
- bool usable;
size_t bytes;
int err;
@@ -1416,19 +1416,6 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port)
*/
dev->hard_header_len += MLXSW_TXHDR_LEN;
- err = mlxsw_sp_port_module_check(mlxsw_sp_port, &usable);
- if (err) {
- dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to check module\n",
- mlxsw_sp_port->local_port);
- goto err_port_module_check;
- }
-
- if (!usable) {
- dev_dbg(mlxsw_sp->bus_info->dev, "Port %d: Not usable, skipping initialization\n",
- mlxsw_sp_port->local_port);
- goto port_not_usable;
- }
-
devlink_port = &mlxsw_sp_port->devlink_port;
err = devlink_port_register(devlink, devlink_port, local_port);
if (err) {
@@ -1496,8 +1483,6 @@ err_port_swid_set:
err_port_system_port_mapping_set:
devlink_port_unregister(&mlxsw_sp_port->devlink_port);
err_devlink_port_register:
-port_not_usable:
-err_port_module_check:
err_dev_addr_init:
free_percpu(mlxsw_sp_port->pcpu_stats);
err_alloc_stats:
@@ -1559,6 +1544,7 @@ static void mlxsw_sp_ports_remove(struct mlxsw_sp *mlxsw_sp)
static int mlxsw_sp_ports_create(struct mlxsw_sp *mlxsw_sp)
{
size_t alloc_size;
+ u8 module, width;
int i;
int err;
@@ -1568,6 +1554,13 @@ static int mlxsw_sp_ports_create(struct mlxsw_sp *mlxsw_sp)
return -ENOMEM;
for (i = 1; i < MLXSW_PORT_MAX_PORTS; i++) {
+ err = mlxsw_sp_port_module_info_get(mlxsw_sp, i, &module,
+ &width);
+ if (err)
+ goto err_port_module_info_get;
+ if (!width)
+ continue;
+ mlxsw_sp->port_to_module[i] = module;
err = mlxsw_sp_port_create(mlxsw_sp, i);
if (err)
goto err_port_create;
@@ -1575,6 +1568,7 @@ static int mlxsw_sp_ports_create(struct mlxsw_sp *mlxsw_sp)
return 0;
err_port_create:
+err_port_module_info_get:
for (i--; i >= 1; i--)
mlxsw_sp_port_remove(mlxsw_sp, i);
kfree(mlxsw_sp->ports);
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
index 6bf6dac..a7d86ac 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
@@ -123,6 +123,7 @@ struct mlxsw_sp {
u32 ageing_time;
struct mlxsw_sp_upper master_bridge;
struct mlxsw_sp_upper lags[MLXSW_SP_LAG_MAX];
+ u8 port_to_module[MLXSW_PORT_MAX_PORTS];
};
static inline struct mlxsw_sp_upper *
--
2.5.0
Powered by blists - more mailing lists