netdev - Re: [PATCH v2] can: rcar_canfd: Add Renesas R-Car CAN FD driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <56DF0900.6090906@hartkopp.net>
Date:	Tue, 8 Mar 2016 18:16:48 +0100
From:	Oliver Hartkopp <socketcan@...tkopp.net>
To:	Ramesh Shanmugasundaram <ramesh.shanmugasundaram@...renesas.com>,
	Marc Kleine-Budde <mkl@...gutronix.de>,
	"wg@...ndegger.com" <wg@...ndegger.com>,
	"robh+dt@...nel.org" <robh+dt@...nel.org>,
	"pawel.moll@....com" <pawel.moll@....com>,
	"mark.rutland@....com" <mark.rutland@....com>,
	"ijc+devicetree@...lion.org.uk" <ijc+devicetree@...lion.org.uk>,
	"galak@...eaurora.org" <galak@...eaurora.org>,
	"corbet@....net" <corbet@....net>
Cc:	"linux-renesas-soc@...r.kernel.org" 
	<linux-renesas-soc@...r.kernel.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"linux-can@...r.kernel.org" <linux-can@...r.kernel.org>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
	"geert+renesas@...der.be" <geert+renesas@...der.be>,
	Chris Paterson <Chris.Paterson2@...esas.com>
Subject: Re: [PATCH v2] can: rcar_canfd: Add Renesas R-Car CAN FD driver

On 03/08/2016 01:48 PM, Ramesh Shanmugasundaram wrote:

>> In fact you provided a CAN driver which is "CAN-FD-only".
> 
> Yes. That's the status of current submission.
> 
>> We did not had that before but there's a solution for this kind of setup.
>>
>> There is a similar case with CAN_CTRLMODE_FD_NON_ISO we had on the M_CAN
>> driver which only provides non-ISO configuration for the supported IP core
>> and _no_ option to _change_ this value:
>>
>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id
>> =6cfda7fbebe8a4fd33ea5722fa0212f98f643c35
>>
>> If you would do it similar in rcar_canfd.c with
>>
>> /* CAN_CTRLMODE_FD is fixed with R-Car CAN FD */
>> priv->can.ctrlmode = CAN_CTRLMODE_FD;
>>
>> and remove CAN_CTRLMODE_FD from the priv->can.ctrlmode_supported
>> assignment then it should do the entire configuration process correctly
>> for you.
>> Including the proper tests for the two bitrates.
>> (see open_candev() in linux/drivers/net/can/dev.c)
>>
>> Right?
> 
> I did try this option earlier but there are two problems with this method.
> 
> 1) Below configuration is not possible
> 
> ip link set can0 up type can bitrate 1000000 dbitrate 1000000 fd on
> 
> "fd on" -> This is not allowed because CAN_CTRLMODE_FD bit is not set in ctrlmode_supported.
> 
> 2) If I ignore "fd on", my interface MTU stays as CAN_MTU only. If I have to change the MTU alone to CANFD_MTU using another netlink message, it again checks ctrlmode_supported where it would fail. I have the option of providing my own change_mtu function & ignore this check but two configuration messages are required for my driver alone :-(.
> 
> Both these anomalies are addressed with the current check I have. 

Oh - you are right with complaining about this inconsistency.

Can you check my RFC patch for Linux stable I just sent on the mailing list?
http://marc.info/?l=linux-can&m=145745724917976&w=2

Many thanks,
Oliver