lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <56EB13CA.4040007@ednet.ns.ca>
Date:	Thu, 17 Mar 2016 17:30:02 -0300
From:	Patrick Boutilier <boutilpj@...et.ns.ca>
To:	Tom Herbert <tom@...bertland.com>
Cc:	Linux Kernel Network Developers <netdev@...r.kernel.org>
Subject: Re: Extreme slowness in IPIP tunnel when routing through kernel 3.18
 and later

On 03/17/2016 01:47 PM, Tom Herbert wrote:
> On Thu, Mar 17, 2016 at 7:02 AM, Patrick Boutilier <boutilpj@...et.ns.ca> wrote:
>> I have an IPIP tunnel setup between two hosts in different buildings. The
>> Linux router they route through causes extreme slowness in the tunnel when
>> running kernels from 3.18 on . tcpdump shows many cksum errors which don't
>> show up in the 3.17 and earlier kernels. Speed goes back to normal when
>> rx-checksumming and tx-checksumming are turned off using ethtool on the
>> Linux router . Would this be an effect of bulk network packet transmission
>> that was introduced in 3.18 or some other issue?
>>
> If this is happening on a router then the only case where checksums
> are pertinent should be if GSO/GRO is enabled. Please try disabling
> these. Also, are these showing up as checksum errors on the receiver
> (netstat -s).


Yes, turning off GSO/GRO also fixes the issue.

Not sure which value of netstat I am looking for.

Compiling a new kernel now with Jesse's patch to test. Will report back 
in a bit.



>
>
>>
>> eth2
>> driver: igb
>> version: 5.2.15-k
>> firmware-version: 1.5.1
>> bus-info: 0000:06:00.0
>> supports-statistics: yes
>> supports-test: yes
>> supports-eeprom-access: yes
>> supports-register-dump: yes
>> supports-priv-flags: no
>>
>>
>> eth6
>> driver: ixgbe
>> version: 3.19.1-k
>> firmware-version: 0x80000389
>> bus-info: 0000:41:00.0
>> supports-statistics: yes
>> supports-test: yes
>> supports-eeprom-access: yes
>> supports-register-dump: yes
>> supports-priv-flags: no
>>
>>
>>
>>
>>
>> Example of cksum from tcpdump:
>>
>> Flags [.], cksum 0x2237 (incorrect -> 0xbb02), seq 424119200:424120648, ack
>> 1, win 115, options [nop,nop,TS val 303173784 ecr 3971495454], length 1448
>>
>>
>>
>>
>>
>> Results of nuttcp test with rx-checksumming and tx-checksumming on:
>>
>>
>> Testing upload inside tunnel
>>
>>
>>
>>      0.0625 MB /   5.00 sec =    0.1048 Mbps    79 retrans
>>      0.0625 MB /   5.00 sec =    0.1048 Mbps    59 retrans
>>      0.0625 MB /   5.00 sec =    0.1049 Mbps    27 retrans
>>
>>      0.2096 MB /  16.11 sec =    0.1092 Mbps 0 %TX 0 %RX 186 retrans 0.47
>> msRTT
>>
>>
>>
>> Testing download inside tunnel
>>
>>
>>
>>      0.5000 MB /   5.00 sec =    0.8389 Mbps   112 retrans
>>      2.6250 MB /   5.00 sec =    4.4040 Mbps   412 retrans
>>      0.8750 MB /   5.00 sec =    1.4680 Mbps   156 retrans
>>
>>      4.0243 MB /  15.48 sec =    2.1809 Mbps 0 %TX 0 %RX 705 retrans 0.47
>> msRTT
>>
>>
>> Testing upload outside tunnel
>>
>>
>>
>>    423.0000 MB /   5.00 sec =  709.4949 Mbps   275 retrans
>>    442.0625 MB /   5.00 sec =  741.7008 Mbps    53 retrans
>>    418.5625 MB /   5.00 sec =  702.1329 Mbps   133 retrans
>>
>>   1287.0080 MB /  15.08 sec =  715.9252 Mbps 1 %TX 30 %RX 461 retrans 0.43
>> msRTT
>>
>>
>>
>> Testing download outside tunnel
>>
>>
>>
>>    552.4375 MB /   5.00 sec =  926.8347 Mbps    26 retrans
>>    555.1875 MB /   5.00 sec =  931.4499 Mbps    17 retrans
>>    553.0000 MB /   5.00 sec =  927.7802 Mbps    16 retrans
>>
>>   1664.2149 MB /  15.03 sec =  928.6737 Mbps 9 %TX 5 %RX 60 retrans 0.46
>> msRTT
>>
>>
>>
>>
>>
>>
>> Results of nuttcp test with rx-checksumming and tx-checksumming off:
>>
>>
>>
>> Testing upload inside tunnel
>>
>>
>>
>>    440.0000 MB /   5.00 sec =  738.0112 Mbps   117 retrans
>>    433.0000 MB /   5.00 sec =  726.4892 Mbps   135 retrans
>>    447.9375 MB /   5.00 sec =  751.5714 Mbps   112 retrans
>>
>>   1321.0069 MB /  15.04 sec =  736.7213 Mbps 3 %TX 21 %RX 364 retrans 0.51
>> msRTT
>>
>>
>>
>> Testing download inside tunnel
>>
>>
>>
>>    494.0625 MB /   5.00 sec =  828.8973 Mbps   335 retrans
>>    471.0000 MB /   5.00 sec =  790.2050 Mbps   219 retrans
>>    469.8750 MB /   5.00 sec =  788.3174 Mbps   220 retrans
>>
>>   1435.1875 MB /  15.00 sec =  802.4203 Mbps 89 %TX 12 %RX 774 retrans 0.46
>> msRTT
>>
>>
>> Testing upload outside tunnel
>>
>>
>>
>>    431.2500 MB /   5.00 sec =  723.2808 Mbps    33 retrans
>>    446.3750 MB /   5.00 sec =  748.9268 Mbps    10 retrans
>>    475.4375 MB /   5.00 sec =  797.7044 Mbps     0 retrans
>>
>>   1355.0834 MB /  15.06 sec =  754.6438 Mbps 1 %TX 33 %RX 43 retrans 0.53
>> msRTT
>>
>>
>>
>> Testing download outside tunnel
>>
>>
>>
>>    424.8125 MB /   5.00 sec =  712.7061 Mbps   102 retrans
>>    456.5625 MB /   5.00 sec =  765.9872 Mbps    80 retrans
>>    454.0000 MB /   5.00 sec =  761.6935 Mbps   116 retrans
>>
>>   1335.7823 MB /  15.01 sec =  746.6959 Mbps 4 %TX 5 %RX 298 retrans 0.55
>> msRTT


View attachment "boutilpj.vcf" of type "text/x-vcard" (287 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ