[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CA+BoTQn5yLd3J87V_rXVpUgXMVYLv+0x9xkbnyxjcvamk9x0Tg@mail.gmail.com>
Date: Thu, 17 Mar 2016 10:43:50 +0100
From: Michal Kazior <michal.kazior@...to.com>
To: Dave Taht <dave.taht@...il.com>
Cc: linux-wireless <linux-wireless@...r.kernel.org>,
"ath10k@...ts.infradead.org" <ath10k@...ts.infradead.org>,
Network Development <netdev@...r.kernel.org>,
make-wifi-fast@...ts.bufferbloat.net,
"codel@...ts.bufferbloat.net" <codel@...ts.bufferbloat.net>
Subject: Re: [RFCv2 0/3] mac80211: implement fq codel
I've re-tested selected cases with wmm_enabled=0 set on the DUT AP.
I'm attaching results.
Naming:
* "old-" is without mac/ath10k changes (referred to as kvalo-reverts
previously) and fq_codel on qdiscs,
* "patched-" is all patches applied (both mac and ath),
* "-be-bursts" is stock "bursts" flent test,
* "-all-bursts" is modified "bursts" flent test to burst on all 3
tids simultaneously: tid0(BE), tid1(BK), tid5(VI).
Michał
On 16 March 2016 at 19:36, Dave Taht <dave.taht@...il.com> wrote:
> That is the sanest 802.11e queue behavior I have ever seen! (at both
> 6 and 300mbit! in the ath10k patched mac test)
>
> It would be good to add a flow to this test that exercises the VI
> queue (CS5 diffserv marking?), and to repeat this test with wmm
> disabled for comparison.
>
>
> Dave Täht
> Let's go make home routers and wifi faster! With better software!
> https://www.gofundme.com/savewifi
>
>
> On Wed, Mar 16, 2016 at 8:37 AM, Dave Taht <dave.taht@...il.com> wrote:
>> it is helpful to name the test files coherently in the flent tests, in
>> addition to using a directory structure and timestamp. It makes doing
>> comparison plots in data->add-other-open-data-files simpler. "-t
>> patched-mac-300mbps", for example.
>>
>> Also netperf from svn (maybe 2.7, don't remember) will restart udp_rr
>> after a packet loss in 250ms. Seeing a loss on UDP_RR and it stop for
>> a while is "ok".
>> Dave Täht
>> Let's go make home routers and wifi faster! With better software!
>> https://www.gofundme.com/savewifi
>>
>>
>> On Wed, Mar 16, 2016 at 3:26 AM, Michal Kazior <michal.kazior@...to.com> wrote:
>>> On 16 March 2016 at 11:17, Michal Kazior <michal.kazior@...to.com> wrote:
>>>> Hi,
>>>>
>>>> Most notable changes:
>>> [...]
>>>> * ath10k proof-of-concept that uses the new tx
>>>> scheduling (will post results in separate
>>>> email)
>>>
>>> I'm attaching a bunch of tests I've done using flent. They are all
>>> "burst" tests with burst-ports=1 and burst-length=2. The testing
>>> topology is:
>>>
>>> AP ----> STA
>>> AP )) (( STA
>>> [veth]--[br]--[wlan] )) (( [wlan]
>>>
>>> You can notice that in some tests plot data gets cut-off. There are 2
>>> problems I've identified:
>>> - excess drops (not a problem with the patchset and can be seen when
>>> there's no codel-in-mac or scheduling isn't used)
>>> - UDP_RR hangs (apparently QCA99X0 I have hangs for a few hundred ms
>>> sometimes at times and doesn't Rx frames causing UDP_RR to stop
>>> mid-way; confirmed with logs and sniffer; I haven't figured out *why*
>>> exactly, could be some hw/fw quirk)
>>>
>>> Let me know if you have questions or comments regarding my testing/results.
>>>
>>>
>>> Michał
Download attachment "bursts-2016-03-17T093033.443115.patched_all_bursts.flent.gz" of type "application/x-gzip" (13841 bytes)
Download attachment "bursts-2016-03-17T092946.721003.patched_be_bursts.flent.gz" of type "application/x-gzip" (13786 bytes)
Download attachment "bursts-2016-03-17T092445.132728.old_be_bursts.flent.gz" of type "application/x-gzip" (6349 bytes)
Download attachment "bursts-2016-03-17T091952.053950.old_all_bursts.flent.gz" of type "application/x-gzip" (5458 bytes)
Download attachment "patched-be-bursts.gif" of type "image/gif" (17961 bytes)
Powered by blists - more mailing lists