[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160321124043.GA26873@rob-hp-laptop>
Date: Mon, 21 Mar 2016 07:40:43 -0500
From: Rob Herring <robh@...nel.org>
To: Chen-Yu Tsai <wens@...e.org>
Cc: Alexandre TORGUE <alexandre.torgue@...il.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
netdev <netdev@...r.kernel.org>,
devicetree <devicetree@...r.kernel.org>,
Joachim Eastwood <manabian@...il.com>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v5 2/4] Documentation: Bindings: Add STM32 DWMAC glue
On Sat, Mar 19, 2016 at 12:00:22AM +0800, Chen-Yu Tsai wrote:
> Hi,
>
> On Fri, Mar 18, 2016 at 11:37 PM, Alexandre TORGUE
> <alexandre.torgue@...il.com> wrote:
> > Signed-off-by: Alexandre TORGUE <alexandre.torgue@...il.com>
> >
> > diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
> > new file mode 100644
> > index 0000000..ada2aa4
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
> > @@ -0,0 +1,32 @@
> > +STMicroelectronics STM32 / MCU DWMAC glue layer controller
> > +
> > +This file documents platform glue layer for stmmac.
> > +Please see stmmac.txt for the other unchanged properties.
> > +
> > +The device node has following properties.
> > +
> > +Required properties:
> > +- compatible: Should be "st,stm32-dwmac" to select glue, and
> > + "snps,dwmac-3.50a" to select IP vesrion.
>
> If you need have sort of hardware glue, then it is not compatible.
Hence, the more specific compatible. Having the generic one is still
useful.
>
> ChenYu
>
> > +- clocks: Must contain a phandle for each entry in clock-names.
> > +- clock-names: Should be "stmmaceth" for the host clock.
This doesn't sound like the clock input signal name...
> > + Should be "tx-clk" for the MAC TX clock.
> > + Should be "rx-clk" for the MAC RX clock.
How can other DWMAC blocks not have these clocks? The glue can't really
add these clocks. It could combine them into one or a new version of
DWMAC could have a different number of clock inputs. So if there is
variation here, then some of the bindings are probably wrong. I guess
the only change I'm suggesting is possibly moving these into common
binding doc.
> > +- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
> > + encompases the glue register, and the offset of the control register.
> > +Example:
> > +
> > + ethernet0: dwmac@...28000 {
ethernet@...
> > + compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
> > + status = "disabled";
> > + reg = <0x40028000 0x8000>;
> > + reg-names = "stmmaceth";
> > + interrupts = <0 61 0>, <0 62 0>;
> > + interrupt-names = "macirq", "eth_wake_irq";
> > + clock-names = "stmmaceth", "tx-clk", "rx-clk";
> > + clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
> > + st,syscon = <&syscfg 0x4>;
> > + snps,pbl = <8>;
> > + snps,mixed-burst;
> > + dma-ranges;
> > + };
> > --
> > 1.9.1
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@...ts.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists