| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160330231116.12643.59554.stgit@localhost.localdomain>
Date: Wed, 30 Mar 2016 16:15:37 -0700
From: Alexander Duyck <aduyck@...antis.com>
To: netdev@...r.kernel.org, jesse.brandeburg@...el.com,
alexander.duyck@...il.com, intel-wired-lan@...ts.osuosl.org,
jeffrey.t.kirsher@...el.com, sowmini.varadhan@...cle.com
Subject: [net PATCH v2] i40e/i40evf: Limit TSO to 7 descriptors for payload
instead of 8 per packet
This patch addresses a bug introduced based on my interpretation of the
XL710 datasheet. Specifically section 8.4.1 states that "A single transmit
packet may span up to 8 buffers (up to 8 data descriptors per packet
including both the header and payload buffers)." It then later goes on to
say that each segment for a TSO obeys the previous rule, however it then
refers to TSO header and the segment payload buffers.
I believe the actual limit for fragments with TSO and a skbuff that has
payload data in the header portion of the buffer is actually only 7
fragments as the skb->data portion counts as 2 buffers, one for the TSO
header, and one for a segment payload buffer.
Fixes: 2d37490b82af ("i40e/i40evf: Rewrite logic for 8 descriptor per packet check")
Signed-off-by: Alexander Duyck <aduyck@...antis.com>
---
v2: I realized that I overlooked the check in the inline function and as a
result we were still allowing for cases where 8 descriptors were being
used per packet and this would result in 9 DMA buffers. I updated the
code so that we only allow 8 in the case of a single send, otherwise we
go into the function that walks the frags to verify each block.
I have tested this using rds-stress and it seems to run traffic without
throwing any errors.
drivers/net/ethernet/intel/i40e/i40e_txrx.c | 49 ++++++++++++-------------
drivers/net/ethernet/intel/i40e/i40e_txrx.h | 10 ++++-
drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 49 ++++++++++++-------------
drivers/net/ethernet/intel/i40evf/i40e_txrx.h | 10 ++++-
4 files changed, 62 insertions(+), 56 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 5d5fa5359a1d..6bf705add321 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -2597,35 +2597,34 @@ int __i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size)
}
/**
- * __i40e_chk_linearize - Check if there are more than 8 fragments per packet
+ * __i40e_chk_linearize - Check if there are more than 8 buffers per packet
* @skb: send buffer
*
- * Note: Our HW can't scatter-gather more than 8 fragments to build
- * a packet on the wire and so we need to figure out the cases where we
- * need to linearize the skb.
+ * Note: Our HW can't DMA more than 8 buffers to build a packet on the wire
+ * and so we need to figure out the cases where we need to linearize the skb.
+ *
+ * For TSO we need to count the TSO header and segment payload separately.
+ * As such we need to check cases where we have 7 fragments or more as we
+ * can potentially require 9 DMA transactions, 1 for the TSO header, 1 for
+ * the segment payload in the first descriptor, and another 7 for the
+ * fragments.
**/
bool __i40e_chk_linearize(struct sk_buff *skb)
{
const struct skb_frag_struct *frag, *stale;
- int gso_size, nr_frags, sum;
-
- /* check to see if TSO is enabled, if so we may get a repreive */
- gso_size = skb_shinfo(skb)->gso_size;
- if (unlikely(!gso_size))
- return true;
+ int nr_frags, sum;
- /* no need to check if number of frags is less than 8 */
+ /* no need to check if number of frags is less than 7 */
nr_frags = skb_shinfo(skb)->nr_frags;
- if (nr_frags < I40E_MAX_BUFFER_TXD)
+ if (nr_frags < (I40E_MAX_BUFFER_TXD - 1))
return false;
/* We need to walk through the list and validate that each group
* of 6 fragments totals at least gso_size. However we don't need
- * to perform such validation on the first or last 6 since the first
- * 6 cannot inherit any data from a descriptor before them, and the
- * last 6 cannot inherit any data from a descriptor after them.
+ * to perform such validation on the last 6 since the last 6 cannot
+ * inherit any data from a descriptor after them.
*/
- nr_frags -= I40E_MAX_BUFFER_TXD - 1;
+ nr_frags -= I40E_MAX_BUFFER_TXD - 2;
frag = &skb_shinfo(skb)->frags[0];
/* Initialize size to the negative value of gso_size minus 1. We
@@ -2634,21 +2633,21 @@ bool __i40e_chk_linearize(struct sk_buff *skb)
* descriptors for a single transmit as the header and previous
* fragment are already consuming 2 descriptors.
*/
- sum = 1 - gso_size;
+ sum = 1 - skb_shinfo(skb)->gso_size;
- /* Add size of frags 1 through 5 to create our initial sum */
- sum += skb_frag_size(++frag);
- sum += skb_frag_size(++frag);
- sum += skb_frag_size(++frag);
- sum += skb_frag_size(++frag);
- sum += skb_frag_size(++frag);
+ /* Add size of frags 0 through 4 to create our initial sum */
+ sum += skb_frag_size(frag++);
+ sum += skb_frag_size(frag++);
+ sum += skb_frag_size(frag++);
+ sum += skb_frag_size(frag++);
+ sum += skb_frag_size(frag++);
/* Walk through fragments adding latest fragment, testing it, and
* then removing stale fragments from the sum.
*/
stale = &skb_shinfo(skb)->frags[0];
for (;;) {
- sum += skb_frag_size(++frag);
+ sum += skb_frag_size(frag++);
/* if sum is negative we failed to make sufficient progress */
if (sum < 0)
@@ -2658,7 +2657,7 @@ bool __i40e_chk_linearize(struct sk_buff *skb)
if (!--nr_frags)
break;
- sum -= skb_frag_size(++stale);
+ sum -= skb_frag_size(stale++);
}
return false;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
index 681e9bca37db..c864932bd844 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
@@ -442,10 +442,14 @@ static inline int i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size)
**/
static inline bool i40e_chk_linearize(struct sk_buff *skb, int count)
{
- /* we can only support up to 8 data buffers for a single send */
- if (likely(count <= I40E_MAX_BUFFER_TXD))
+ /* Both TSO and single send will work if count is less than 8 */
+ if (likely(count < I40E_MAX_BUFFER_TXD))
return false;
- return __i40e_chk_linearize(skb);
+ if (skb_is_gso(skb))
+ return __i40e_chk_linearize(skb);
+
+ /* we can support up to 8 data buffers for a single send */
+ return count != I40E_MAX_BUFFER_TXD;
}
#endif /* _I40E_TXRX_H_ */
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index 04aabc52ba0d..519256bb63e8 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -1799,35 +1799,34 @@ static void i40e_create_tx_ctx(struct i40e_ring *tx_ring,
}
/**
- * __i40evf_chk_linearize - Check if there are more than 8 fragments per packet
+ * __i40evf_chk_linearize - Check if there are more than 8 buffers per packet
* @skb: send buffer
*
- * Note: Our HW can't scatter-gather more than 8 fragments to build
- * a packet on the wire and so we need to figure out the cases where we
- * need to linearize the skb.
+ * Note: Our HW can't DMA more than 8 buffers to build a packet on the wire
+ * and so we need to figure out the cases where we need to linearize the skb.
+ *
+ * For TSO we need to count the TSO header and segment payload separately.
+ * As such we need to check cases where we have 7 fragments or more as we
+ * can potentially require 9 DMA transactions, 1 for the TSO header, 1 for
+ * the segment payload in the first descriptor, and another 7 for the
+ * fragments.
**/
bool __i40evf_chk_linearize(struct sk_buff *skb)
{
const struct skb_frag_struct *frag, *stale;
- int gso_size, nr_frags, sum;
-
- /* check to see if TSO is enabled, if so we may get a repreive */
- gso_size = skb_shinfo(skb)->gso_size;
- if (unlikely(!gso_size))
- return true;
+ int nr_frags, sum;
- /* no need to check if number of frags is less than 8 */
+ /* no need to check if number of frags is less than 7 */
nr_frags = skb_shinfo(skb)->nr_frags;
- if (nr_frags < I40E_MAX_BUFFER_TXD)
+ if (nr_frags < (I40E_MAX_BUFFER_TXD - 1))
return false;
/* We need to walk through the list and validate that each group
* of 6 fragments totals at least gso_size. However we don't need
- * to perform such validation on the first or last 6 since the first
- * 6 cannot inherit any data from a descriptor before them, and the
- * last 6 cannot inherit any data from a descriptor after them.
+ * to perform such validation on the last 6 since the last 6 cannot
+ * inherit any data from a descriptor after them.
*/
- nr_frags -= I40E_MAX_BUFFER_TXD - 1;
+ nr_frags -= I40E_MAX_BUFFER_TXD - 2;
frag = &skb_shinfo(skb)->frags[0];
/* Initialize size to the negative value of gso_size minus 1. We
@@ -1836,21 +1835,21 @@ bool __i40evf_chk_linearize(struct sk_buff *skb)
* descriptors for a single transmit as the header and previous
* fragment are already consuming 2 descriptors.
*/
- sum = 1 - gso_size;
+ sum = 1 - skb_shinfo(skb)->gso_size;
- /* Add size of frags 1 through 5 to create our initial sum */
- sum += skb_frag_size(++frag);
- sum += skb_frag_size(++frag);
- sum += skb_frag_size(++frag);
- sum += skb_frag_size(++frag);
- sum += skb_frag_size(++frag);
+ /* Add size of frags 0 through 4 to create our initial sum */
+ sum += skb_frag_size(frag++);
+ sum += skb_frag_size(frag++);
+ sum += skb_frag_size(frag++);
+ sum += skb_frag_size(frag++);
+ sum += skb_frag_size(frag++);
/* Walk through fragments adding latest fragment, testing it, and
* then removing stale fragments from the sum.
*/
stale = &skb_shinfo(skb)->frags[0];
for (;;) {
- sum += skb_frag_size(++frag);
+ sum += skb_frag_size(frag++);
/* if sum is negative we failed to make sufficient progress */
if (sum < 0)
@@ -1860,7 +1859,7 @@ bool __i40evf_chk_linearize(struct sk_buff *skb)
if (!--nr_frags)
break;
- sum -= skb_frag_size(++stale);
+ sum -= skb_frag_size(stale++);
}
return false;
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
index 6cf116972f62..396c3893ce8a 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
@@ -424,10 +424,14 @@ static inline int i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size)
**/
static inline bool i40e_chk_linearize(struct sk_buff *skb, int count)
{
- /* we can only support up to 8 data buffers for a single send */
- if (likely(count <= I40E_MAX_BUFFER_TXD))
+ /* Both TSO and single send will work if count is less than 8 */
+ if (likely(count < I40E_MAX_BUFFER_TXD))
return false;
- return __i40evf_chk_linearize(skb);
+ if (skb_is_gso(skb))
+ return __i40evf_chk_linearize(skb);
+
+ /* we can support up to 8 data buffers for a single send */
+ return count != I40E_MAX_BUFFER_TXD;
}
#endif /* _I40E_TXRX_H_ */
Powered by blists - more mailing lists