[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1459303875-3362-3-git-send-email-moritz.fischer@ettus.com>
Date: Tue, 29 Mar 2016 19:11:12 -0700
From: Moritz Fischer <moritz.fischer@...us.com>
To: nicolas.ferre@...el.com
Cc: michal.simek@...inx.com, joe@...ches.com, davem@...emloft.net,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
moritz.fischer.private@...il.com,
Moritz Fischer <moritz.fischer@...us.com>
Subject: [PATCH v3 2/5] net: macb: Fix coding style warnings
This commit takes care of the coding style warnings
that are mostly due to a different comment style and
lines over 80 chars, as well as a dangling else.
Acked-by: Nicolas Ferre <nicolas.ferre@...el.com>
Signed-off-by: Moritz Fischer <moritz.fischer@...us.com>
---
drivers/net/ethernet/cadence/macb.c | 100 +++++++++++++++---------------------
1 file changed, 42 insertions(+), 58 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index b5aa96e..f25681b 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -61,8 +61,7 @@
#define MACB_WOL_HAS_MAGIC_PACKET (0x1 << 0)
#define MACB_WOL_ENABLED (0x1 << 1)
-/*
- * Graceful stop timeouts in us. We should allow up to
+/* Graceful stop timeouts in us. We should allow up to
* 1 frame time (10 Mbits/s, full-duplex, ignoring collisions)
*/
#define MACB_HALT_TIMEOUT 1230
@@ -130,8 +129,7 @@ static void hw_writel(struct macb *bp, int offset, u32 value)
writel_relaxed(value, bp->regs + offset);
}
-/*
- * Find the CPU endianness by using the loopback bit of NCR register. When the
+/* Find the CPU endianness by using the loopback bit of NCR register. When the
* CPU is in big endian we need to program swaped mode for management
* descriptor access.
*/
@@ -386,7 +384,8 @@ static int macb_mii_probe(struct net_device *dev)
pdata = dev_get_platdata(&bp->pdev->dev);
if (pdata && gpio_is_valid(pdata->phy_irq_pin)) {
- ret = devm_gpio_request(&bp->pdev->dev, pdata->phy_irq_pin, "phy int");
+ ret = devm_gpio_request(&bp->pdev->dev, pdata->phy_irq_pin,
+ "phy int");
if (!ret) {
phy_irq = gpio_to_irq(pdata->phy_irq_pin);
phydev->irq = (phy_irq < 0) ? PHY_POLL : phy_irq;
@@ -452,7 +451,8 @@ static int macb_mii_init(struct macb *bp)
err = of_mdiobus_register(bp->mii_bus, np);
/* fallback to standard phy registration if no phy were
- found during dt phy registration */
+ * found during dt phy registration
+ */
if (!err && !phy_find_first(bp->mii_bus)) {
for (i = 0; i < PHY_MAX_ADDR; i++) {
struct phy_device *phydev;
@@ -567,8 +567,7 @@ static void macb_tx_error_task(struct work_struct *work)
/* Make sure nobody is trying to queue up new packets */
netif_tx_stop_all_queues(bp->dev);
- /*
- * Stop transmission now
+ /* Stop transmission now
* (in case we have just queued new packets)
* macb/gem must be halted to write TBQP register
*/
@@ -576,8 +575,7 @@ static void macb_tx_error_task(struct work_struct *work)
/* Just complain for now, reinitializing TX path can be good */
netdev_err(bp->dev, "BUG: halt tx timed out\n");
- /*
- * Treat frames in TX queue including the ones that caused the error.
+ /* Treat frames in TX queue including the ones that caused the error.
* Free transmit buffers in upper layer.
*/
for (tail = queue->tx_tail; tail != queue->tx_head; tail++) {
@@ -607,10 +605,9 @@ static void macb_tx_error_task(struct work_struct *work)
bp->stats.tx_bytes += skb->len;
}
} else {
- /*
- * "Buffers exhausted mid-frame" errors may only happen
- * if the driver is buggy, so complain loudly about those.
- * Statistics are updated by hardware.
+ /* "Buffers exhausted mid-frame" errors may only happen
+ * if the driver is buggy, so complain loudly about
+ * those. Statistics are updated by hardware.
*/
if (ctrl & MACB_BIT(TX_BUF_EXHAUSTED))
netdev_err(bp->dev,
@@ -722,7 +719,8 @@ static void gem_rx_refill(struct macb *bp)
struct sk_buff *skb;
dma_addr_t paddr;
- while (CIRC_SPACE(bp->rx_prepared_head, bp->rx_tail, RX_RING_SIZE) > 0) {
+ while (CIRC_SPACE(bp->rx_prepared_head, bp->rx_tail,
+ RX_RING_SIZE) > 0) {
entry = macb_rx_ring_wrap(bp->rx_prepared_head);
/* Make hw descriptor updates visible to CPU */
@@ -741,7 +739,8 @@ static void gem_rx_refill(struct macb *bp)
/* now fill corresponding descriptor entry */
paddr = dma_map_single(&bp->pdev->dev, skb->data,
- bp->rx_buffer_size, DMA_FROM_DEVICE);
+ bp->rx_buffer_size,
+ DMA_FROM_DEVICE);
if (dma_mapping_error(&bp->pdev->dev, paddr)) {
dev_kfree_skb(skb);
break;
@@ -777,14 +776,14 @@ static void discard_partial_frame(struct macb *bp, unsigned int begin,
for (frag = begin; frag != end; frag++) {
struct macb_dma_desc *desc = macb_rx_desc(bp, frag);
+
desc->addr &= ~MACB_BIT(RX_USED);
}
/* Make descriptor updates visible to hardware */
wmb();
- /*
- * When this happens, the hardware stats registers for
+ /* When this happens, the hardware stats registers for
* whatever caused this is updated, so we don't have to record
* anything.
*/
@@ -883,8 +882,7 @@ static int macb_rx_frame(struct macb *bp, unsigned int first_frag,
macb_rx_ring_wrap(first_frag),
macb_rx_ring_wrap(last_frag), len);
- /*
- * The ethernet header starts NET_IP_ALIGN bytes into the
+ /* The ethernet header starts NET_IP_ALIGN bytes into the
* first buffer. Since the header is 14 bytes, this makes the
* payload word-aligned.
*
@@ -1099,8 +1097,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
(unsigned long)status);
if (status & MACB_RX_INT_FLAGS) {
- /*
- * There's no point taking any more interrupts
+ /* There's no point taking any more interrupts
* until we have processed the buffers. The
* scheduling call may fail if the poll routine
* is already scheduled, so disable interrupts
@@ -1129,8 +1126,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
if (status & MACB_BIT(TCOMP))
macb_tx_interrupt(queue);
- /*
- * Link change detection isn't possible with RMII, so we'll
+ /* Link change detection isn't possible with RMII, so we'll
* add that if/when we get our hands on a full-blown MII PHY.
*/
@@ -1161,8 +1157,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
}
if (status & MACB_BIT(HRESP)) {
- /*
- * TODO: Reset the hardware, and maybe move the
+ /* TODO: Reset the hardware, and maybe move the
* netdev_err to a lower-priority context as well
* (work queue?)
*/
@@ -1181,8 +1176,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
}
#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Polling receive - used by netconsole and other diagnostic tools
+/* Polling receive - used by netconsole and other diagnostic tools
* to allow network i/o with interrupts disabled.
*/
static void macb_poll_controller(struct net_device *dev)
@@ -1478,10 +1472,10 @@ static int gem_alloc_rx_buffers(struct macb *bp)
bp->rx_skbuff = kzalloc(size, GFP_KERNEL);
if (!bp->rx_skbuff)
return -ENOMEM;
- else
- netdev_dbg(bp->dev,
- "Allocated %d RX struct sk_buff entries at %p\n",
- RX_RING_SIZE, bp->rx_skbuff);
+
+ netdev_dbg(bp->dev,
+ "Allocated %d RX struct sk_buff entries at %p\n",
+ RX_RING_SIZE, bp->rx_skbuff);
return 0;
}
@@ -1494,10 +1488,10 @@ static int macb_alloc_rx_buffers(struct macb *bp)
&bp->rx_buffers_dma, GFP_KERNEL);
if (!bp->rx_buffers)
return -ENOMEM;
- else
- netdev_dbg(bp->dev,
- "Allocated RX buffers of %d bytes at %08lx (mapped %p)\n",
- size, (unsigned long)bp->rx_buffers_dma, bp->rx_buffers);
+
+ netdev_dbg(bp->dev,
+ "Allocated RX buffers of %d bytes at %08lx (mapped %p)\n",
+ size, (unsigned long)bp->rx_buffers_dma, bp->rx_buffers);
return 0;
}
@@ -1588,8 +1582,7 @@ static void macb_reset_hw(struct macb *bp)
struct macb_queue *queue;
unsigned int q;
- /*
- * Disable RX and TX (XXX: Should we halt the transmission
+ /* Disable RX and TX (XXX: Should we halt the transmission
* more gracefully?)
*/
macb_writel(bp, NCR, 0);
@@ -1652,8 +1645,7 @@ static u32 macb_mdc_clk_div(struct macb *bp)
return config;
}
-/*
- * Get the DMA bus width field of the network configuration register that we
+/* Get the DMA bus width field of the network configuration register that we
* should program. We find the width from decoding the design configuration
* register to find the maximum supported data bus width.
*/
@@ -1673,8 +1665,7 @@ static u32 macb_dbw(struct macb *bp)
}
}
-/*
- * Configure the receive DMA engine
+/* Configure the receive DMA engine
* - use the correct receive buffer size
* - set best burst length for DMA operations
* (if not supported by FIFO, it will fallback to default)
@@ -1762,8 +1753,7 @@ static void macb_init_hw(struct macb *bp)
macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE) | MACB_BIT(MPE));
}
-/*
- * The hash address register is 64 bits long and takes up two
+/* The hash address register is 64 bits long and takes up two
* locations in the memory map. The least significant bits are stored
* in EMAC_HSL and the most significant bits in EMAC_HSH.
*
@@ -1803,9 +1793,7 @@ static inline int hash_bit_value(int bitnr, __u8 *addr)
return 0;
}
-/*
- * Return the hash index value for the specified address.
- */
+/* Return the hash index value for the specified address. */
static int hash_get_index(__u8 *addr)
{
int i, j, bitval;
@@ -1821,9 +1809,7 @@ static int hash_get_index(__u8 *addr)
return hash_index;
}
-/*
- * Add multicast addresses to the internal multicast-hash table.
- */
+/* Add multicast addresses to the internal multicast-hash table. */
static void macb_sethashtable(struct net_device *dev)
{
struct netdev_hw_addr *ha;
@@ -1842,9 +1828,7 @@ static void macb_sethashtable(struct net_device *dev)
macb_or_gem_writel(bp, HRT, mc_filter[1]);
}
-/*
- * Enable/Disable promiscuous and multicast modes.
- */
+/* Enable/Disable promiscuous and multicast modes. */
static void macb_set_rx_mode(struct net_device *dev)
{
unsigned long cfg;
@@ -2161,9 +2145,8 @@ static void macb_get_regs(struct net_device *dev, struct ethtool_regs *regs,
if (!(bp->caps & MACB_CAPS_USRIO_DISABLED))
regs_buff[12] = macb_or_gem_readl(bp, USRIO);
- if (macb_is_gem(bp)) {
+ if (macb_is_gem(bp))
regs_buff[13] = gem_readl(bp, DMACFG);
- }
}
static void macb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
@@ -2286,11 +2269,11 @@ static const struct net_device_ops macb_netdev_ops = {
.ndo_set_features = macb_set_features,
};
-/*
- * Configure peripheral capabilities according to device tree
+/* Configure peripheral capabilities according to device tree
* and integration options used
*/
-static void macb_configure_caps(struct macb *bp, const struct macb_config *dt_conf)
+static void macb_configure_caps(struct macb *bp,
+ const struct macb_config *dt_conf)
{
u32 dcfg;
@@ -2996,6 +2979,7 @@ static int macb_probe(struct platform_device *pdev)
phy_node = of_get_next_available_child(np, NULL);
if (phy_node) {
int gpio = of_get_named_gpio(phy_node, "reset-gpios", 0);
+
if (gpio_is_valid(gpio)) {
bp->reset_gpio = gpio_to_desc(gpio);
gpiod_direction_output(bp->reset_gpio, 1);
--
2.7.4
Powered by blists - more mailing lists