| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 5 Apr 2016 04:22:41 -0400
From: Michael Chan <michael.chan@...adcom.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org
Subject: [PATCH net-next 09/10] bnxt_en: Check for valid forced speed during ethtool -s.
Check that the forced speed is a valid speed supported by firmware.
If not supported, return -EINVAL.
Signed-off-by: Michael Chan <michael.chan@...adcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 48 ++++++++++++++++++-----
1 file changed, 38 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 3b4db00..289895f 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -739,28 +739,49 @@ static int bnxt_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
static u32 bnxt_get_fw_speed(struct net_device *dev, u16 ethtool_speed)
{
+ struct bnxt *bp = netdev_priv(dev);
+ struct bnxt_link_info *link_info = &bp->link_info;
+ u16 support_spds = link_info->support_speeds;
+ u32 fw_speed = 0;
+
switch (ethtool_speed) {
case SPEED_100:
- return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_100MB;
+ if (support_spds & BNXT_LINK_SPEED_MSK_100MB)
+ fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_100MB;
+ break;
case SPEED_1000:
- return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_1GB;
+ if (support_spds & BNXT_LINK_SPEED_MSK_1GB)
+ fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_1GB;
+ break;
case SPEED_2500:
- return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_2_5GB;
+ if (support_spds & BNXT_LINK_SPEED_MSK_2_5GB)
+ fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_2_5GB;
+ break;
case SPEED_10000:
- return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_10GB;
+ if (support_spds & BNXT_LINK_SPEED_MSK_10GB)
+ fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_10GB;
+ break;
case SPEED_20000:
- return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_20GB;
+ if (support_spds & BNXT_LINK_SPEED_MSK_20GB)
+ fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_20GB;
+ break;
case SPEED_25000:
- return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_25GB;
+ if (support_spds & BNXT_LINK_SPEED_MSK_25GB)
+ fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_25GB;
+ break;
case SPEED_40000:
- return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_40GB;
+ if (support_spds & BNXT_LINK_SPEED_MSK_40GB)
+ fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_40GB;
+ break;
case SPEED_50000:
- return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_50GB;
+ if (support_spds & BNXT_LINK_SPEED_MSK_50GB)
+ fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_50GB;
+ break;
default:
netdev_err(dev, "unsupported speed!\n");
break;
}
- return 0;
+ return fw_speed;
}
u16 bnxt_get_fw_auto_link_speeds(u32 advertising)
@@ -823,6 +844,8 @@ static int bnxt_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
*/
set_pause = true;
} else {
+ u16 fw_speed;
+
/* TODO: currently don't support half duplex */
if (cmd->duplex == DUPLEX_HALF) {
netdev_err(dev, "HALF DUPLEX is not supported!\n");
@@ -833,7 +856,12 @@ static int bnxt_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
if (cmd->duplex == DUPLEX_UNKNOWN)
cmd->duplex = DUPLEX_FULL;
speed = ethtool_cmd_speed(cmd);
- link_info->req_link_speed = bnxt_get_fw_speed(dev, speed);
+ fw_speed = bnxt_get_fw_speed(dev, speed);
+ if (!fw_speed) {
+ rc = -EINVAL;
+ goto set_setting_exit;
+ }
+ link_info->req_link_speed = fw_speed;
link_info->req_duplex = BNXT_LINK_DUPLEX_FULL;
link_info->autoneg = 0;
link_info->advertising = 0;
--
1.8.3.1
Powered by blists - more mailing lists