netdev - [PATCH net-next v3 0/4] vxlan: implement Generic Protocol Extension (GPE)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <cover.1459860270.git.jbenc@redhat.com>
Date:	Tue,  5 Apr 2016 14:47:09 +0200
From:	Jiri Benc <jbenc@...hat.com>
To:	netdev@...r.kernel.org
Cc:	Tom Herbert <tom@...bertland.com>, Jesse Gross <jesse@...nel.org>
Subject: [PATCH net-next v3 0/4] vxlan: implement Generic Protocol Extension (GPE)

v3: just rebased on top of the current net-next, no changes

This patchset implements VXLAN-GPE. It follows the same model as the tun/tap
driver: depending on the chosen mode, the vxlan interface is created either
as ARPHRD_ETHER (non-GPE) or ARPHRD_NONE (GPE).

Note that the internal fdb control plane cannot be used together with
VXLAN-GPE and attempt to configure it will be rejected by the driver. In
fact, COLLECT_METADATA is required to be set for now. This can be relaxed in
the future by adding support for static PtP configuration; it will be
backward compatible and won't affect existing users.

The previous version of the patchset supported two GPE modes, L2 and L3. The
L2 mode (now called "ether mode" in the code) was removed from this version.
It can be easily added later if there's demand. The L3 mode is now called
"raw mode" and supports also encapsulated Ethernet headers (via ETH_P_TEB).

The only limitation of not having "ether mode" for GPE is for ip route based
encapsulation: with such setup, only IP packets can be encapsulated. Meaning
no Ethernet encapsulation. It seems there's not much use for this, though.
If it turns out to be useful, we'll add it.

Jiri Benc (4):
  vxlan: move Ethernet initialization to a separate function
  vxlan: move fdb code to common location in vxlan_xmit
  ip_tunnel: implement __iptunnel_pull_header
  vxlan: implement GPE

 drivers/net/vxlan.c          | 210 ++++++++++++++++++++++++++++++++++++-------
 include/net/ip_tunnels.h     |  11 ++-
 include/net/vxlan.h          |  68 ++++++++++++++
 include/uapi/linux/if_link.h |   1 +
 net/ipv4/ip_tunnel_core.c    |   8 +-
 5 files changed, 258 insertions(+), 40 deletions(-)

-- 
1.8.3.1