lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Wed, 6 Apr 2016 16:56:48 +0200 From: Giuseppe CAVALLARO <peppe.cavallaro@...com> To: Vineet Gupta <Vineet.Gupta1@...opsys.com>, Alexey Brodkin <Alexey.Brodkin@...opsys.com>, <linux-snps-arc@...ts.infradead.org> CC: Rob Herring <robh@...nel.org>, Phil Reid <preid@...ctromag.com.au>, "David S. Miller" <davem@...emloft.net>, <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>, Gabriel Fernandez <gabriel.fernandez@...aro.org>, Sergei Shtylyov <sergei.shtylyov@...entembedded.com> Subject: Re: [PATCH v2] ARC: axs10x - add Ethernet PHY description in .dts On 4/6/2016 11:12 AM, Vineet Gupta wrote: > Hi, > > On Thursday 17 March 2016 03:11 PM, Alexey Brodkin wrote: >> Following commit broke DW GMAC functionality on AXS10x boards: >> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=e34d65696d2ef13dc32f2a162556c86c461ed763 >> >> That's what happens on eth0 up: >> --------------------------->8------------------------ >> libphy: PHY stmmac-0:ffffffff not found >> eth0: Could not attach to PHY >> stmmac_open: Cannot attach to PHY (error: -19) >> --------------------------->8------------------------ >> >> Simplest solution is to add PHY description in board's .dts. >> And so we do here. >> >> Signed-off-by: Alexey Brodkin <abrodkin@...opsys.com> >> Cc: Rob Herring <robh@...nel.org> >> Cc: Phil Reid <preid@...ctromag.com.au> >> Cc: David S. Miller <davem@...emloft.net> >> Cc: linux-kernel@...r.kernel.org >> Cc: netdev@...r.kernel.org >> Cc: stable@...r.kernel.org # 4.5.x >> Cc: Sergei Shtylyov <sergei.shtylyov@...entembedded.com> >> --- >> >> Changes v1 -> v2: >> * PHY node name changed to match real PHY number being used (Sergei) >> >> arch/arc/boot/dts/axs10x_mb.dtsi | 8 ++++++++ >> 1 file changed, 8 insertions(+) >> >> diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi >> index 44a578c..ab5d570 100644 >> --- a/arch/arc/boot/dts/axs10x_mb.dtsi >> +++ b/arch/arc/boot/dts/axs10x_mb.dtsi >> @@ -47,6 +47,14 @@ >> clocks = <&apbclk>; >> clock-names = "stmmaceth"; >> max-speed = <100>; >> + mdio0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "snps,dwmac-mdio"; >> + phy1: ethernet-phy@1 { >> + reg = <1>; >> + }; >> + }; >> }; >> >> ehci@...0000 { > > > So above DT fix for ARC went into 4.6-rc1 and ethernet was still broken on axs103 > board. > > ---------->8------------- > libphy: PHY stmmac-0:ffffffff not found > eth0: Could not attach to PHY > stmmac_open: Cannot attach to PHY (error: -19) > ---------->8------------- > > On 4.6-rc2 if I revert the DT change, ethernet works again. > > @Giuseppe, @Phil, @Gabriel, I see you have made changes in that area. I presume > that above revert is the right/sufficient thing or do we need to do something else > as well. hmm I think so, we pushed all the changes in net-next to fix the MDIO initialization according to the different DT parameter settings. So unless there is some other case to cover, I think that the best approach is to do the revert. pls, let me know peppe > > TIA, > -Vineet > >
Powered by blists - more mailing lists