| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1460045792-30594-4-git-send-email-akinobu.mita@gmail.com>
Date: Fri, 8 Apr 2016 01:16:31 +0900
From: Akinobu Mita <akinobu.mita@...il.com>
To: netdev@...r.kernel.org
Cc: Akinobu Mita <akinobu.mita@...il.com>,
Mike Sinkovsky <msink@...monline.ru>,
"David S. Miller" <davem@...emloft.net>
Subject: [PATCH v2 4/5] net: w5100: support SPI interface mode
This adds new w5100-spi driver which shares the bus interface
independent code with existing w5100 driver.
Signed-off-by: Akinobu Mita <akinobu.mita@...il.com>
Cc: Mike Sinkovsky <msink@...monline.ru>
Cc: David S. Miller <davem@...emloft.net>
---
* v2
- Use spi_write_then_read instead of spi_write which needs DMA-safe buffer
drivers/net/ethernet/wiznet/Kconfig | 14 ++++
drivers/net/ethernet/wiznet/Makefile | 1 +
drivers/net/ethernet/wiznet/w5100-spi.c | 135 ++++++++++++++++++++++++++++++++
3 files changed, 150 insertions(+)
create mode 100644 drivers/net/ethernet/wiznet/w5100-spi.c
diff --git a/drivers/net/ethernet/wiznet/Kconfig b/drivers/net/ethernet/wiznet/Kconfig
index f98b91d..d1ab353 100644
--- a/drivers/net/ethernet/wiznet/Kconfig
+++ b/drivers/net/ethernet/wiznet/Kconfig
@@ -69,4 +69,18 @@ config WIZNET_BUS_ANY
Performance may decrease compared to explicitly selected bus mode.
endchoice
+config WIZNET_W5100_SPI
+ tristate "WIZnet W5100 Ethernet support for SPI mode"
+ depends on WIZNET_BUS_ANY
+ depends on SPI
+ ---help---
+ In SPI mode host system accesses registers using SPI protocol
+ (mode 0) on the SPI bus.
+
+ Performance decreases compared to other bus interface mode.
+ In W5100 SPI mode, burst READ/WRITE processing are not provided.
+
+ To compile this driver as a module, choose M here: the module
+ will be called w5100-spi.
+
endif # NET_VENDOR_WIZNET
diff --git a/drivers/net/ethernet/wiznet/Makefile b/drivers/net/ethernet/wiznet/Makefile
index c614535..1e05e1a 100644
--- a/drivers/net/ethernet/wiznet/Makefile
+++ b/drivers/net/ethernet/wiznet/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_WIZNET_W5100) += w5100.o
+obj-$(CONFIG_WIZNET_W5100_SPI) += w5100-spi.o
obj-$(CONFIG_WIZNET_W5300) += w5300.o
diff --git a/drivers/net/ethernet/wiznet/w5100-spi.c b/drivers/net/ethernet/wiznet/w5100-spi.c
new file mode 100644
index 0000000..bf2f434
--- /dev/null
+++ b/drivers/net/ethernet/wiznet/w5100-spi.c
@@ -0,0 +1,135 @@
+/*
+ * Ethernet driver for the WIZnet W5100 chip.
+ *
+ * Copyright (C) 2016 Akinobu Mita <akinobu.mita@...il.com>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/spi/spi.h>
+
+#include "w5100.h"
+
+#define W5100_SPI_WRITE_OPCODE 0xf0
+#define W5100_SPI_READ_OPCODE 0x0f
+
+static int w5100_spi_read(struct net_device *ndev, u16 addr)
+{
+ struct spi_device *spi = to_spi_device(ndev->dev.parent);
+ u8 cmd[3] = { W5100_SPI_READ_OPCODE, addr >> 8, addr & 0xff };
+ u8 data;
+ int ret;
+
+ ret = spi_write_then_read(spi, cmd, sizeof(cmd), &data, 1);
+
+ return ret ? ret : data;
+}
+
+static int w5100_spi_write(struct net_device *ndev, u16 addr, u8 data)
+{
+ struct spi_device *spi = to_spi_device(ndev->dev.parent);
+ u8 cmd[4] = { W5100_SPI_WRITE_OPCODE, addr >> 8, addr & 0xff, data};
+
+ return spi_write_then_read(spi, cmd, sizeof(cmd), NULL, 0);
+}
+
+static int w5100_spi_read16(struct net_device *ndev, u16 addr)
+{
+ u16 data;
+ int ret;
+
+ ret = w5100_spi_read(ndev, addr);
+ if (ret < 0)
+ return ret;
+ data = ret << 8;
+ ret = w5100_spi_read(ndev, addr + 1);
+
+ return ret < 0 ? ret : data | ret;
+}
+
+static int w5100_spi_write16(struct net_device *ndev, u16 addr, u16 data)
+{
+ int ret;
+
+ ret = w5100_spi_write(ndev, addr, data >> 8);
+ if (ret)
+ return ret;
+
+ return w5100_spi_write(ndev, addr + 1, data & 0xff);
+}
+
+static int w5100_spi_readbulk(struct net_device *ndev, u16 addr, u8 *buf,
+ int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ int ret = w5100_spi_read(ndev, addr + i);
+
+ if (ret < 0)
+ return ret;
+ buf[i] = ret;
+ }
+
+ return 0;
+}
+
+static int w5100_spi_writebulk(struct net_device *ndev, u16 addr, const u8 *buf,
+ int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ int ret = w5100_spi_write(ndev, addr + i, buf[i]);
+
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct w5100_ops w5100_spi_ops = {
+ .may_sleep = true,
+ .read = w5100_spi_read,
+ .write = w5100_spi_write,
+ .read16 = w5100_spi_read16,
+ .write16 = w5100_spi_write16,
+ .readbulk = w5100_spi_readbulk,
+ .writebulk = w5100_spi_writebulk,
+};
+
+static int w5100_spi_probe(struct spi_device *spi)
+{
+ return w5100_probe(&spi->dev, &w5100_spi_ops, NULL, spi->irq, -EINVAL);
+}
+
+static int w5100_spi_remove(struct spi_device *spi)
+{
+ return w5100_remove(&spi->dev);
+}
+
+static const struct spi_device_id w5100_spi_ids[] = {
+ { "w5100", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, w5100_spi_ids);
+
+static struct spi_driver w5100_spi_driver = {
+ .driver = {
+ .name = "w5100",
+ .pm = &w5100_pm_ops,
+ },
+ .probe = w5100_spi_probe,
+ .remove = w5100_spi_remove,
+ .id_table = w5100_spi_ids,
+};
+module_spi_driver(w5100_spi_driver);
+
+MODULE_DESCRIPTION("WIZnet W5100 Ethernet driver for SPI mode");
+MODULE_AUTHOR("Akinobu Mita <akinobu.mita@...il.com>");
+MODULE_LICENSE("GPL");
--
2.5.0
Powered by blists - more mailing lists