[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1460591998-20598-9-git-send-email-andrew@lunn.ch>
Date: Thu, 14 Apr 2016 01:59:58 +0200
From: Andrew Lunn <andrew@...n.ch>
To: David Miller <davem@...emloft.net>
Cc: Florian Fainelli <f.fainelli@...il.com>,
netdev <netdev@...r.kernel.org>,
Vivien Didelot <vivien.didelot@...oirfairelinux.com>,
Andrew Lunn <andrew@...n.ch>
Subject: [PATCH net-next 8/8] dsa: mv88e6131: Don't special case a single device
When multiple switches are interconnected in a tree, a routing table
is used for directing packets out the correct port towards a remote
destination. This works equally well for a single switch, since the
routing table is empty. So don't special case for a single switch.
This makes the mv88e6131 behave like the other drivers.
Signed-off-by: Andrew Lunn <andrew@...n.ch>
---
drivers/net/dsa/mv88e6131.c | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c
index 969f67c77835..c7ee11f73be6 100644
--- a/drivers/net/dsa/mv88e6131.c
+++ b/drivers/net/dsa/mv88e6131.c
@@ -74,18 +74,12 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
if (ret)
return ret;
- /* Disable cascade port functionality unless this device
- * is used in a cascade configuration, and set the switch's
- * DSA device number.
+ /* Set the switch's DSA device number and enable the use of
+ * the routing table.
*/
- if (ds->dst->pd->nr_chips > 1)
- ret = mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_CONTROL_2,
- GLOBAL_CONTROL_2_MULTIPLE_CASCADE |
- (ds->index & 0x1f));
- else
- ret = mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_CONTROL_2,
- GLOBAL_CONTROL_2_NO_CASCADE |
- (ds->index & 0x1f));
+ ret = mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_CONTROL_2,
+ GLOBAL_CONTROL_2_MULTIPLE_CASCADE |
+ (ds->index & 0x1f));
if (ret)
return ret;
--
2.7.0
Powered by blists - more mailing lists