netdev - [RFC PATCH 2/5] mlx5: Add support for UDP tunnel segmentation with outer checksum offload

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160419190603.11723.31623.stgit@ahduyck-xeon-server>
Date:	Tue, 19 Apr 2016 15:06:03 -0400
From:	Alexander Duyck <aduyck@...antis.com>
To:	eugenia@...lanox.com, bruce.w.allan@...el.com, saeedm@...lanox.com,
	netdev@...r.kernel.org, intel-wired-lan@...ts.osuosl.org,
	ariel.elior@...gic.com, mchan@...adcom.com
Subject: [RFC PATCH 2/5] mlx5: Add support for UDP tunnel segmentation with
 outer checksum offload

This patch assumes that the mlx5 hardware will ignore existing IPv4/v6
header fields for length and checksum as well as the length and checksum
fields for outer UDP headers.

I have no means of testing this as I do not have any mlx5 hardware but
thought I would submit it as an RFC to see if anyone out there wants to
test this and see if this does in fact enable this functionality allowing
us to to segment UDP tunneled frames that have an outer checksum.

Signed-off-by: Alexander Duyck <aduyck@...antis.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index e0adb604f461..57d8da796d50 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -2390,13 +2390,18 @@ static void mlx5e_build_netdev(struct net_device *netdev)
 	netdev->hw_features      |= NETIF_F_HW_VLAN_CTAG_FILTER;
 
 	if (mlx5e_vxlan_allowed(mdev)) {
-		netdev->hw_features     |= NETIF_F_GSO_UDP_TUNNEL;
+		netdev->hw_features     |= NETIF_F_GSO_UDP_TUNNEL |
+					   NETIF_F_GSO_UDP_TUNNEL_CSUM |
+					   NETIF_F_GSO_PARTIAL;
 		netdev->hw_enc_features |= NETIF_F_IP_CSUM;
 		netdev->hw_enc_features |= NETIF_F_RXCSUM;
 		netdev->hw_enc_features |= NETIF_F_TSO;
 		netdev->hw_enc_features |= NETIF_F_TSO6;
 		netdev->hw_enc_features |= NETIF_F_RXHASH;
 		netdev->hw_enc_features |= NETIF_F_GSO_UDP_TUNNEL;
+		netdev->hw_enc_features |= NETIF_F_GSO_UDP_TUNNEL_CSUM |
+					   NETIF_F_GSO_PARTIAL;
+		netdev->gso_partial_features = NETIF_F_GSO_UDP_TUNNEL_CSUM;
 	}
 
 	netdev->features          = netdev->hw_features;