[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1461230323-27891-4-git-send-email-pramod.kumar@broadcom.com>
Date: Thu, 21 Apr 2016 14:48:40 +0530
From: Pramod Kumar <pramod.kumar@...adcom.com>
To: Rob Herring <robh+dt@...nel.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Chen-Yu Tsai <wens@...e.org>
Cc: BCM Kernel Feedback <bcm-kernel-feedback-list@...adcom.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Arnd Bergmann <arnd@...db.de>,
Suzuki K Poulose <suzuki.poulose@....com>,
Punit Agrawal <punit.agrawal@....com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
Pramod Kumar <pramod.kumar@...adcom.com>
Subject: [PATCH 3/6] bus: Add platform driver for iProc shared MDIO Controller
Add platform driver to populate shared MDIO masters on iProc SoC.
Signed-off-by: Pramod Kumar <pramod.kumar@...adcom.com>
Reviewed-by: Anup Patel <anup.patel@...adcom.com>
Reviewed-by: Ray Jui <ray.jui@...adcom.com>
Reviewed-by: Scott Branden <scott.branden@...adcom.com>
Reviewed-by: Vikram Prakash <vikram.prakash@...adcom.com>
---
drivers/bus/Kconfig | 11 ++
drivers/bus/Makefile | 1 +
drivers/bus/iproc_shared_mdio.c | 287 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 299 insertions(+)
create mode 100644 drivers/bus/iproc_shared_mdio.c
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 1b51b1a..c3f2cb9 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -118,6 +118,17 @@ config SHARED_MDIO
Respective drivers would be called matching a compatible string
provided in master node.
+config IPROC_SHARED_MDIO
+ tristate "iProc Shared MDIO Driver"
+ depends on OF
+ select SHARED_MDIO
+ default ARCH_BCM_IPROC
+ help
+ Platform driver for shared MDIO controller. Broadcom's iProc based
+ SoCs have many masters which uses one shared bus to accessed its PHY.
+ This platform driver populates all master to Shared bus and provide
+ the MDIO controller specific implementation.
+
config SIMPLE_PM_BUS
bool "Simple Power-Managed Bus Driver"
depends on OF && PM
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 2b6d6e9..3e364da 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o
obj-$(CONFIG_SHARED_MDIO) += shared_mdio.o
+obj-$(CONFIG_IPROC_SHARED_MDIO) += iproc_shared_mdio.o
diff --git a/drivers/bus/iproc_shared_mdio.c b/drivers/bus/iproc_shared_mdio.c
new file mode 100644
index 0000000..af232eb
--- /dev/null
+++ b/drivers/bus/iproc_shared_mdio.c
@@ -0,0 +1,287 @@
+/*
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Platform driver for Shared MDIO Masters on iProc SoC
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/shared_mdio.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+struct shared_mdio_master_param {
+ bool is_internal;
+ bool is_c45;
+ unsigned int master_id;
+};
+
+struct iproc_shared_mdio {
+ struct device *dev;
+ struct mutex lock;
+ void __iomem *regs;
+ unsigned int num_masters;
+ struct shared_mdio_master **masters;
+};
+
+#define PHY_INTERNAL 1
+#define CLAUSE_45 1
+
+#define MDIO_PARAM_OFFSET 0x00
+#define MDIO_PARAM_MIIM_CYCLE 29
+#define MDIO_PARAM_INTERNAL_SEL 25
+#define MDIO_PARAM_BUS_ID 22
+#define MDIO_PARAM_C45_SEL 21
+#define MDIO_PARAM_PHY_ID 16
+#define MDIO_PARAM_PHY_DATA 0
+
+#define MDIO_READ_OFFSET 0x04
+#define MDIO_READ_DATA_MASK 0xffff
+#define MDIO_ADDR_OFFSET 0x08
+
+#define MDIO_CTRL_OFFSET 0x0C
+#define MDIO_CTRL_WRITE_OP 0x1
+#define MDIO_CTRL_READ_OP 0x2
+
+#define MDIO_STAT_OFFSET 0x10
+#define MDIO_STAT_DONE 1
+
+static int iproc_mdio_wait_for_idle(void __iomem *base, bool result)
+{
+ u32 val;
+ unsigned int timeout = 1000; /* loop for 1s */
+
+ do {
+ val = readl(base + MDIO_STAT_OFFSET);
+ if ((val & MDIO_STAT_DONE) == result)
+ return 0;
+
+ usleep_range(1000, 2000);
+ } while (timeout--);
+
+ return -ETIMEDOUT;
+}
+
+static inline u32 get_cmd(bool con, u16 mid, bool is_c45, u16 phyid, u16 val)
+{
+ u32 cmd;
+
+ cmd = (con ? 1 : 0) << MDIO_PARAM_INTERNAL_SEL;
+ cmd |= mid << MDIO_PARAM_BUS_ID;
+ cmd |= (is_c45 ? 1 : 0) << MDIO_PARAM_C45_SEL;
+ cmd |= phyid << MDIO_PARAM_PHY_ID;
+ cmd |= val << MDIO_PARAM_PHY_DATA;
+
+ return cmd;
+}
+
+/*
+ * start_miim_ops- Program and start MDIO transaction over mdio bus.
+ * @base: Base address
+ * @cmd: param values that need to be programmed in MDIO PARAM_OFFSET.
+ * @reg: register offset ot be read/written.
+ * @op: Operation that need to be carried out.
+ * MDIO_CTRL_READ_OP: Read transaction.
+ * MDIO_CTRL_WRITE_OP: Write transaction.
+ *
+ * Return value: Sucessfull Read operation returns read reg values and write
+ * operation returns 0. Failure opertation returns negative error code.
+ */
+static int start_miim_ops(void __iomem *base, u32 cmd, u32 reg, u32 op)
+{
+ int ret = 0;
+
+ writel(0, base + MDIO_CTRL_OFFSET);
+ ret = iproc_mdio_wait_for_idle(base, false);
+ if (ret)
+ return ret;
+
+ writel(cmd, base + MDIO_PARAM_OFFSET);
+ writel(reg, base + MDIO_ADDR_OFFSET);
+
+ writel(op, base + MDIO_CTRL_OFFSET);
+
+ ret = iproc_mdio_wait_for_idle(base, true);
+ if (ret)
+ return ret;
+
+ if (op == MDIO_CTRL_READ_OP)
+ ret = readl(base + MDIO_READ_OFFSET) & MDIO_READ_DATA_MASK;
+
+ return ret;
+}
+
+static int iproc_shared_mdio_read(struct shared_mdio_master *master,
+ u16 phyid, u16 reg)
+{
+ int ret;
+ u32 cmd;
+ struct iproc_shared_mdio *imdio = dev_get_drvdata(master->dev.parent);
+ struct shared_mdio_master_param *param = master->priv;
+
+ mutex_lock(&imdio->lock);
+
+ dev_dbg(imdio->dev, "master=%d phy=%d reg=%d\n",
+ param->master_id, phyid, reg);
+
+ cmd = get_cmd(param->is_internal, param->master_id, param->is_c45,
+ phyid, 0x0);
+ ret = start_miim_ops(imdio->regs, cmd, reg, MDIO_CTRL_READ_OP);
+ if (ret < 0)
+ dev_err(imdio->dev, "MDIO read operation failed!!!");
+
+ mutex_unlock(&imdio->lock);
+ return ret;
+}
+
+static int iproc_shared_mdio_write(struct shared_mdio_master *master,
+ u16 phyid, u16 reg, u16 val)
+{
+ u32 cmd;
+ int ret;
+ struct iproc_shared_mdio *imdio = dev_get_drvdata(master->dev.parent);
+ struct shared_mdio_master_param *param = master->priv;
+
+ mutex_lock(&imdio->lock);
+
+ dev_dbg(imdio->dev, "master=%d phy=%d reg=%d val=0x%x\n",
+ param->master_id, phyid, reg, val);
+
+ /* Write val at reg offset */
+ cmd = get_cmd(param->is_internal, param->master_id, param->is_c45,
+ phyid, val);
+ ret = start_miim_ops(imdio->regs, cmd, reg, MDIO_CTRL_WRITE_OP);
+ if (ret < 0)
+ dev_err(imdio->dev, "MDIO Write operation failed!!!");
+
+ mutex_unlock(&imdio->lock);
+ return ret;
+}
+
+static int iproc_shared_mdio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *dn = dev->of_node, *child;
+ struct iproc_shared_mdio *imdio;
+ struct resource *res;
+ int ret = 0, cnt;
+
+ imdio = devm_kzalloc(dev, sizeof(*imdio), GFP_KERNEL);
+ if (!imdio)
+ return -ENOMEM;
+
+ imdio->num_masters = of_get_available_child_count(dn);
+ if (!imdio->num_masters)
+ return -ENODEV;
+
+ imdio->masters = devm_kcalloc(dev, imdio->num_masters,
+ sizeof(**imdio->masters), GFP_KERNEL);
+ if (!imdio->masters)
+ return -ENOMEM;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mdio");
+ imdio->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(imdio->regs))
+ return PTR_ERR(imdio->regs);
+
+ imdio->dev = dev;
+ mutex_init(&imdio->lock);
+
+ cnt = 0;
+ for_each_available_child_of_node(dn, child) {
+ unsigned int id;
+ struct shared_mdio_master *master;
+ struct shared_mdio_master_param *param;
+
+ if (of_property_read_u32(child, "reg", &id)) {
+ dev_err(dev, "missing reg property in node %s\n",
+ child->name);
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ master = shared_mdio_alloc_master(dev, child);
+ if (IS_ERR(master)) {
+ ret = PTR_ERR(master);
+ goto fail;
+ }
+ imdio->masters[cnt] = master;
+
+ param = devm_kzalloc(dev, sizeof(*param), GFP_KERNEL);
+ if (!param) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+ master->priv = param;
+ param->master_id = id;
+
+ param->is_internal = of_property_read_bool(child,
+ "brcm,phy-internal");
+ param->is_c45 = of_property_read_bool(child, "brcm,is-c45");
+ master->mdio_read = iproc_shared_mdio_read;
+ master->mdio_write = iproc_shared_mdio_write;
+
+ ret = shared_mdio_add_master(master);
+ if (ret)
+ goto fail;
+ cnt++;
+ }
+ platform_set_drvdata(pdev, imdio);
+ dev_info(dev, "registered %d masters(s)\n", cnt);
+ return 0;
+fail:
+ for (cnt = 0; cnt < imdio->num_masters; cnt++) {
+ if (imdio->masters[cnt]) {
+ shared_mdio_remove_master(imdio->masters[cnt]);
+ imdio->masters[cnt] = NULL;
+ }
+ }
+ return ret;
+}
+
+static int iproc_shared_mdio_remove(struct platform_device *pdev)
+{
+ int i;
+ struct iproc_shared_mdio *imdio = platform_get_drvdata(pdev);
+
+ for (i = 0; i < imdio->num_masters; i++) {
+ if (imdio->masters[i]) {
+ shared_mdio_remove_master(imdio->masters[i]);
+ imdio->masters[i] = NULL;
+ }
+ }
+
+ return 0;
+}
+
+static const struct of_device_id iproc_shared_mdio_of_match[] = {
+ { .compatible = "brcm,iproc-shared-mdio", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, iproc_shared_mdio_of_match);
+
+static struct platform_driver iproc_shared_mdio_driver = {
+ .probe = iproc_shared_mdio_probe,
+ .remove = iproc_shared_mdio_remove,
+ .driver = {
+ .name = "iproc-shared-mdio",
+ .of_match_table = iproc_shared_mdio_of_match,
+ },
+};
+
+module_platform_driver(iproc_shared_mdio_driver);
+
+MODULE_DESCRIPTION("iProc Shared MDIO Master Driver");
+MODULE_AUTHOR("Pramod Kumar <pramod.kumar@...adcom.com>");
+MODULE_LICENSE("GPL v2");
--
1.9.1
Powered by blists - more mailing lists