| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1461788153-12869-2-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Wed, 27 Apr 2016 13:15:40 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Alexander Duyck <aduyck@...antis.com>, netdev@...r.kernel.org,
nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next v2 01/14] i40e/i40evf: Clean up feature flags
From: Alexander Duyck <aduyck@...antis.com>
The feature flags list for i40e and i40evf is beginning to become pretty
massive. I plan to add another 4 or so features to these drivers and
duplicating the flags for each and every flags list is becoming a bit
repetitive.
The primary change here is that we now build our features list around
hw_encap_features. After that we assign that to vlan_features,
hw_features, and finally map that onto features. In addition we end up
throwing features onto hw_encap_features that end up having no effect such
as the Rx offloads and SCTP_CRC. However that should have no impact and
makes things a bit easier for us as hw_encap_features is one of the less
updated features maps available.
For i40evf I went through and sanity checked a few features as well.
Specifically RXCSUM was being set as a read-only feature which didn't make
much sense. I have updated things so we can clear the NETIF_F_RXCSUM flag
since that is really a software feature and not a hardware one anyway so
disabling it is just a matter of ignoring the result from the hardware.
Signed-off-by: Alexander Duyck <aduyck@...antis.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 61 ++++++++++-------------
drivers/net/ethernet/intel/i40evf/i40evf_main.c | 66 ++++++++++++-------------
2 files changed, 58 insertions(+), 69 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 0b071ce..f2e83fe 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -9111,40 +9111,36 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
np = netdev_priv(netdev);
np->vsi = vsi;
- netdev->hw_enc_features |= NETIF_F_IP_CSUM |
- NETIF_F_IPV6_CSUM |
- NETIF_F_TSO |
- NETIF_F_TSO6 |
- NETIF_F_TSO_ECN |
- NETIF_F_GSO_GRE |
- NETIF_F_GSO_UDP_TUNNEL |
- NETIF_F_GSO_UDP_TUNNEL_CSUM |
+ netdev->hw_enc_features |= NETIF_F_SG |
+ NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM |
+ NETIF_F_HIGHDMA |
+ NETIF_F_SOFT_FEATURES |
+ NETIF_F_TSO |
+ NETIF_F_TSO_ECN |
+ NETIF_F_TSO6 |
+ NETIF_F_GSO_GRE |
+ NETIF_F_GSO_UDP_TUNNEL |
+ NETIF_F_GSO_UDP_TUNNEL_CSUM |
+ NETIF_F_SCTP_CRC |
+ NETIF_F_RXHASH |
+ NETIF_F_RXCSUM |
0;
- netdev->features = NETIF_F_SG |
- NETIF_F_IP_CSUM |
- NETIF_F_SCTP_CRC |
- NETIF_F_HIGHDMA |
- NETIF_F_GSO_UDP_TUNNEL |
- NETIF_F_GSO_GRE |
- NETIF_F_HW_VLAN_CTAG_TX |
- NETIF_F_HW_VLAN_CTAG_RX |
- NETIF_F_HW_VLAN_CTAG_FILTER |
- NETIF_F_IPV6_CSUM |
- NETIF_F_TSO |
- NETIF_F_TSO_ECN |
- NETIF_F_TSO6 |
- NETIF_F_RXCSUM |
- NETIF_F_RXHASH |
- 0;
+ if (!(pf->flags & I40E_FLAG_OUTER_UDP_CSUM_CAPABLE))
+ netdev->hw_enc_features ^= NETIF_F_GSO_UDP_TUNNEL_CSUM;
+
+ /* record features VLANs can make use of */
+ netdev->vlan_features |= netdev->hw_enc_features;
if (!(pf->flags & I40E_FLAG_MFP_ENABLED))
- netdev->features |= NETIF_F_NTUPLE;
- if (pf->flags & I40E_FLAG_OUTER_UDP_CSUM_CAPABLE)
- netdev->features |= NETIF_F_GSO_UDP_TUNNEL_CSUM;
+ netdev->hw_features |= NETIF_F_NTUPLE;
+
+ netdev->hw_features |= netdev->hw_enc_features |
+ NETIF_F_HW_VLAN_CTAG_TX |
+ NETIF_F_HW_VLAN_CTAG_RX;
- /* copy netdev features into list of user selectable features */
- netdev->hw_features |= netdev->features;
+ netdev->features |= netdev->hw_features | NETIF_F_HW_VLAN_CTAG_FILTER;
if (vsi->type == I40E_VSI_MAIN) {
SET_NETDEV_DEV(netdev, &pf->pdev->dev);
@@ -9183,12 +9179,7 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
ether_addr_copy(netdev->dev_addr, mac_addr);
ether_addr_copy(netdev->perm_addr, mac_addr);
- /* vlan gets same features (except vlan offload)
- * after any tweaks for specific VSI types
- */
- netdev->vlan_features = netdev->features & ~(NETIF_F_HW_VLAN_CTAG_TX |
- NETIF_F_HW_VLAN_CTAG_RX |
- NETIF_F_HW_VLAN_CTAG_FILTER);
+
netdev->priv_flags |= IFF_UNICAST_FLT;
netdev->priv_flags |= IFF_SUPP_NOFCS;
/* Setup netdev TC information */
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 9110319..e3857d8 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2337,40 +2337,38 @@ int i40evf_process_config(struct i40evf_adapter *adapter)
return -ENODEV;
}
- netdev->features |= NETIF_F_HIGHDMA |
- NETIF_F_SG |
- NETIF_F_IP_CSUM |
- NETIF_F_SCTP_CRC |
- NETIF_F_IPV6_CSUM |
- NETIF_F_TSO |
- NETIF_F_TSO6 |
- NETIF_F_TSO_ECN |
- NETIF_F_GSO_GRE |
- NETIF_F_GSO_UDP_TUNNEL |
- NETIF_F_RXCSUM |
- NETIF_F_GRO;
-
- netdev->hw_enc_features |= NETIF_F_IP_CSUM |
- NETIF_F_IPV6_CSUM |
- NETIF_F_TSO |
- NETIF_F_TSO6 |
- NETIF_F_TSO_ECN |
- NETIF_F_GSO_GRE |
- NETIF_F_GSO_UDP_TUNNEL |
- NETIF_F_GSO_UDP_TUNNEL_CSUM;
-
- if (adapter->flags & I40EVF_FLAG_OUTER_UDP_CSUM_CAPABLE)
- netdev->features |= NETIF_F_GSO_UDP_TUNNEL_CSUM;
-
- /* always clear VLAN features because they can change at every reset */
- netdev->features &= ~(I40EVF_VLAN_FEATURES);
- /* copy netdev features into list of user selectable features */
- netdev->hw_features |= netdev->features;
-
- if (vfres->vf_offload_flags & I40E_VIRTCHNL_VF_OFFLOAD_VLAN) {
- netdev->vlan_features = netdev->features;
- netdev->features |= I40EVF_VLAN_FEATURES;
- }
+ netdev->hw_enc_features |= NETIF_F_SG |
+ NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM |
+ NETIF_F_HIGHDMA |
+ NETIF_F_SOFT_FEATURES |
+ NETIF_F_TSO |
+ NETIF_F_TSO_ECN |
+ NETIF_F_TSO6 |
+ NETIF_F_GSO_GRE |
+ NETIF_F_GSO_UDP_TUNNEL |
+ NETIF_F_GSO_UDP_TUNNEL_CSUM |
+ NETIF_F_SCTP_CRC |
+ NETIF_F_RXHASH |
+ NETIF_F_RXCSUM |
+ 0;
+
+ if (!(adapter->flags & I40EVF_FLAG_OUTER_UDP_CSUM_CAPABLE))
+ netdev->hw_enc_features ^= NETIF_F_GSO_UDP_TUNNEL_CSUM;
+
+ /* record features VLANs can make use of */
+ netdev->vlan_features |= netdev->hw_enc_features;
+
+ /* Write features and hw_features separately to avoid polluting
+ * with, or dropping, features that are set when we registgered.
+ */
+ netdev->hw_features |= netdev->hw_enc_features;
+
+ netdev->features |= netdev->hw_enc_features | I40EVF_VLAN_FEATURES;
+
+ /* disable VLAN features if not supported */
+ if (!(vfres->vf_offload_flags & I40E_VIRTCHNL_VF_OFFLOAD_VLAN))
+ netdev->features ^= I40EVF_VLAN_FEATURES;
adapter->vsi.id = adapter->vsi_res->vsi_id;
--
2.5.5
Powered by blists - more mailing lists