| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1461826902-51368-10-git-send-email-Yisen.Zhuang@huawei.com>
Date: Thu, 28 Apr 2016 15:01:41 +0800
From: Yisen Zhuang <Yisen.Zhuang@...wei.com>
To: <devicetree@...r.kernel.org>, <netdev@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
CC: <robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<davem@...emloft.net>, <will.deacon@....com>,
<catalin.marinas@....com>, <yankejian@...wei.com>,
<huangdaode@...ilicon.com>, <salil.mehta@...wei.com>,
<lipeng321@...wei.com>, <liguozhu@...wei.com>,
<xieqianqian@...wei.com>, <xuwei5@...ilicon.com>,
<linuxarm@...wei.com>
Subject: [PATCH net-next 09/10] net: hns: add attribute port-rst-offset for dsaf port node
The reset offset for each port in a dsaf is different. The current code is
not so readability. This patch adds configuration named port-rst-offset to
make the code simple and more readability. If this attribute isn't exists,
default value of this attribute is equal to its port index.
Signed-off-by: Yisen Zhuang <yisen.zhuang@...wei.com>
---
.../devicetree/bindings/net/hisilicon-hns-dsaf.txt | 4 +++-
drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 10 +++++++++
drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h | 1 +
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c | 26 +++++++---------------
4 files changed, 22 insertions(+), 19 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
index c1358ea..72efe71 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
@@ -42,7 +42,9 @@ Required properties:
- cpld-syscon: is syscon handle for cpld register. It is not required if there
isn't cpld device.
- cpld-ctrl-reg: is cpld register offset. It is not required if there isn't
- cpld-syscon.
+ cpld-syscon.
+- port-rst-offset: is offset of reset field for each port in dsaf. Its value
+ depends on the hardware user manual.
[1] Documentation/devicetree/bindings/net/phy.txt
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
index f1a477d..190477e 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
@@ -664,6 +664,7 @@ static int hns_mac_get_info(struct hns_mac_cb *mac_cb)
mac_cb->max_frm = MAC_DEFAULT_MTU;
mac_cb->tx_pause_frm_time = MAC_DEFAULT_PAUSE_TIME;
+ mac_cb->port_rst_off = mac_cb->mac_id;
/* if the dsaf node doesn't contain a port subnode,
* parse the old dts to get phy-handle from dsaf node
@@ -694,6 +695,15 @@ static int hns_mac_get_info(struct hns_mac_cb *mac_cb)
}
mac_cb->serdes_ctrl = syscon;
+ ret = fwnode_property_read_u32(mac_cb->fw_port,
+ "port-rst-offset",
+ &mac_cb->port_rst_off);
+ if (ret) {
+ dev_dbg(mac_cb->dev,
+ "mac%d port-rst-offset not found, use default value.\n",
+ mac_cb->mac_id);
+ }
+
syscon = syscon_node_to_regmap(
of_parse_phandle(to_of_node(mac_cb->fw_port),
"cpld-syscon", 0));
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h
index 719816b..7be7104 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h
@@ -318,6 +318,7 @@ struct hns_mac_cb {
struct regmap *serdes_ctrl;
struct regmap *cpld_ctrl;
u32 cpld_ctrl_reg;
+ u32 port_rst_off;
struct mac_entry_idx addr_entry_idx[DSAF_MAX_VM_NUM];
u8 sfp_prsnt;
u8 cpld_led_value;
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
index 7e52ab5..fc3056e 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
@@ -136,11 +136,7 @@ void hns_dsaf_xge_srst_by_port(struct dsaf_device *dsaf_dev, u32 port, u32 val)
return;
reg_val |= RESET_REQ_OR_DREQ;
-
- if (!HNS_DSAF_IS_DEBUG(dsaf_dev))
- reg_val |= 0x2082082 << port;
- else
- reg_val |= 0x2082082 << (dsaf_dev->reset_offset + 6);
+ reg_val |= 0x2082082 << dsaf_dev->mac_cb[port]->port_rst_off;
if (val == 0)
reg_addr = DSAF_SUB_SC_XGE_RESET_REQ_REG;
@@ -159,11 +155,7 @@ void hns_dsaf_xge_core_srst_by_port(struct dsaf_device *dsaf_dev,
if (port >= DSAF_XGE_NUM)
return;
- if (!HNS_DSAF_IS_DEBUG(dsaf_dev))
- reg_val |= XGMAC_TRX_CORE_SRST_M << port;
- else
- reg_val |= XGMAC_TRX_CORE_SRST_M <<
- (dsaf_dev->reset_offset + 6);
+ reg_val |= XGMAC_TRX_CORE_SRST_M << dsaf_dev->mac_cb[port]->port_rst_off;
if (val == 0)
reg_addr = DSAF_SUB_SC_XGE_RESET_REQ_REG;
@@ -177,17 +169,19 @@ void hns_dsaf_ge_srst_by_port(struct dsaf_device *dsaf_dev, u32 port, u32 val)
{
u32 reg_val_1;
u32 reg_val_2;
+ u32 port_rst_off;
if (port >= DSAF_GE_NUM)
return;
if (!HNS_DSAF_IS_DEBUG(dsaf_dev)) {
reg_val_1 = 0x1 << port;
+ port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off;
/* there is difference between V1 and V2 in register.*/
if (AE_IS_VER1(dsaf_dev->dsaf_ver))
- reg_val_2 = 0x1041041 << port;
+ reg_val_2 = 0x1041041 << port_rst_off;
else
- reg_val_2 = 0x2082082 << port;
+ reg_val_2 = 0x2082082 << port_rst_off;
if (val == 0) {
dsaf_write_sub(dsaf_dev, DSAF_SUB_SC_GE_RESET_REQ1_REG,
@@ -226,12 +220,8 @@ void hns_ppe_srst_by_port(struct dsaf_device *dsaf_dev, u32 port, u32 val)
{
u32 reg_val = 0;
u32 reg_addr;
-
- if (!HNS_DSAF_IS_DEBUG(dsaf_dev))
- reg_val |= RESET_REQ_OR_DREQ << port;
- else
- reg_val |= RESET_REQ_OR_DREQ <<
- (dsaf_dev->reset_offset + 6);
+
+ reg_val |= RESET_REQ_OR_DREQ << dsaf_dev->mac_cb[port]->port_rst_off;
if (val == 0)
reg_addr = DSAF_SUB_SC_PPE_RESET_REQ_REG;
--
1.9.1
Powered by blists - more mailing lists