| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1462571843-14397-13-git-send-email-vivien.didelot@savoirfairelinux.com>
Date: Fri, 6 May 2016 17:57:14 -0400
From: Vivien Didelot <vivien.didelot@...oirfairelinux.com>
To: netdev@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, kernel@...oirfairelinux.com,
"David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...oirfairelinux.com>
Subject: [PATCH net-next 12/21] net: dsa: mv88e6xxx: factorize switch reset
Add a MV88E6XXX_FLAG_PPU_ACTIVE flag to describe how to reset the
switch, and merge the reset call to the common setup code.
Signed-off-by: Vivien Didelot <vivien.didelot@...oirfairelinux.com>
---
drivers/net/dsa/mv88e6123.c | 4 --
drivers/net/dsa/mv88e6131.c | 4 --
drivers/net/dsa/mv88e6171.c | 4 --
drivers/net/dsa/mv88e6352.c | 4 --
drivers/net/dsa/mv88e6xxx.c | 137 +++++++++++++++++++++++---------------------
drivers/net/dsa/mv88e6xxx.h | 6 +-
6 files changed, 76 insertions(+), 83 deletions(-)
diff --git a/drivers/net/dsa/mv88e6123.c b/drivers/net/dsa/mv88e6123.c
index 45cce4f..fadec7a 100644
--- a/drivers/net/dsa/mv88e6123.c
+++ b/drivers/net/dsa/mv88e6123.c
@@ -99,10 +99,6 @@ static int mv88e6123_setup(struct dsa_switch *ds)
if (ret < 0)
return ret;
- ret = mv88e6xxx_switch_reset(ps, false);
- if (ret < 0)
- return ret;
-
ret = mv88e6123_setup_global(ds);
if (ret < 0)
return ret;
diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c
index 5d25244..25ed823 100644
--- a/drivers/net/dsa/mv88e6131.c
+++ b/drivers/net/dsa/mv88e6131.c
@@ -132,10 +132,6 @@ static int mv88e6131_setup(struct dsa_switch *ds)
if (ret < 0)
return ret;
- ret = mv88e6xxx_switch_reset(ps, false);
- if (ret < 0)
- return ret;
-
ret = mv88e6131_setup_global(ds);
if (ret < 0)
return ret;
diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c
index a98e7d3..caaa4b6 100644
--- a/drivers/net/dsa/mv88e6171.c
+++ b/drivers/net/dsa/mv88e6171.c
@@ -108,10 +108,6 @@ static int mv88e6171_setup(struct dsa_switch *ds)
if (ret < 0)
return ret;
- ret = mv88e6xxx_switch_reset(ps, true);
- if (ret < 0)
- return ret;
-
ret = mv88e6171_setup_global(ds);
if (ret < 0)
return ret;
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
index d03c14a..470789a 100644
--- a/drivers/net/dsa/mv88e6352.c
+++ b/drivers/net/dsa/mv88e6352.c
@@ -125,10 +125,6 @@ static int mv88e6352_setup(struct dsa_switch *ds)
if (ret < 0)
return ret;
- ret = mv88e6xxx_switch_reset(ps, true);
- if (ret < 0)
- return ret;
-
ret = mv88e6352_setup_global(ds);
if (ret < 0)
return ret;
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index dbbda4e..b744ed5 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -2551,6 +2551,68 @@ restore_page_0:
return ret;
}
+static int _mv88e6xxx_switch_reset(struct mv88e6xxx_priv_state *ps)
+{
+ bool ppu_active = mv88e6xxx_has(ps, MV88E6XXX_FLAG_PPU_ACTIVE);
+ u16 is_reset = (ppu_active ? 0x8800 : 0xc800);
+ struct gpio_desc *gpiod = ps->ds->pd->reset;
+ unsigned long timeout;
+ int ret;
+ int i;
+
+ /* Set all ports to the disabled state. */
+ for (i = 0; i < ps->info->num_ports; i++) {
+ ret = _mv88e6xxx_reg_read(ps, REG_PORT(i), PORT_CONTROL);
+ if (ret < 0)
+ return ret;
+
+ ret = _mv88e6xxx_reg_write(ps, REG_PORT(i), PORT_CONTROL,
+ ret & 0xfffc);
+ if (ret)
+ return ret;
+ }
+
+ /* Wait for transmit queues to drain. */
+ usleep_range(2000, 4000);
+
+ /* If there is a gpio connected to the reset pin, toggle it */
+ if (gpiod) {
+ gpiod_set_value_cansleep(gpiod, 1);
+ usleep_range(10000, 20000);
+ gpiod_set_value_cansleep(gpiod, 0);
+ usleep_range(10000, 20000);
+ }
+
+ /* Reset the switch. Keep the PPU active if requested. The PPU
+ * needs to be active to support indirect phy register access
+ * through global registers 0x18 and 0x19.
+ */
+ if (ppu_active)
+ ret = _mv88e6xxx_reg_write(ps, REG_GLOBAL, 0x04, 0xc000);
+ else
+ ret = _mv88e6xxx_reg_write(ps, REG_GLOBAL, 0x04, 0xc400);
+ if (ret)
+ return ret;
+
+ /* Wait up to one second for reset to complete. */
+ timeout = jiffies + 1 * HZ;
+ while (time_before(jiffies, timeout)) {
+ ret = _mv88e6xxx_reg_read(ps, REG_GLOBAL, 0x00);
+ if (ret < 0)
+ return ret;
+
+ if ((ret & is_reset) == is_reset)
+ break;
+ usleep_range(1000, 2000);
+ }
+ if (time_after(jiffies, timeout))
+ ret = -ETIMEDOUT;
+ else
+ ret = 0;
+
+ return ret;
+}
+
static int mv88e6xxx_power_on_serdes(struct mv88e6xxx_priv_state *ps)
{
int ret;
@@ -2852,6 +2914,8 @@ int mv88e6xxx_setup_ports(struct dsa_switch *ds)
int mv88e6xxx_setup_common(struct mv88e6xxx_priv_state *ps)
{
+ int err;
+
mutex_init(&ps->smi_mutex);
INIT_WORK(&ps->bridge_work, mv88e6xxx_bridge_work);
@@ -2862,7 +2926,13 @@ int mv88e6xxx_setup_common(struct mv88e6xxx_priv_state *ps)
if (mv88e6xxx_has(ps, MV88E6XXX_FLAG_PPU))
mv88e6xxx_ppu_state_init(ps);
- return 0;
+ mutex_lock(&ps->smi_mutex);
+
+ err = _mv88e6xxx_switch_reset(ps);
+
+ mutex_unlock(&ps->smi_mutex);
+
+ return err;
}
int mv88e6xxx_setup_global(struct dsa_switch *ds)
@@ -3038,71 +3108,6 @@ unlock:
return err;
}
-int mv88e6xxx_switch_reset(struct mv88e6xxx_priv_state *ps, bool ppu_active)
-{
- u16 is_reset = (ppu_active ? 0x8800 : 0xc800);
- struct gpio_desc *gpiod = ps->ds->pd->reset;
- unsigned long timeout;
- int ret;
- int i;
-
- mutex_lock(&ps->smi_mutex);
-
- /* Set all ports to the disabled state. */
- for (i = 0; i < ps->info->num_ports; i++) {
- ret = _mv88e6xxx_reg_read(ps, REG_PORT(i), PORT_CONTROL);
- if (ret < 0)
- goto unlock;
-
- ret = _mv88e6xxx_reg_write(ps, REG_PORT(i), PORT_CONTROL,
- ret & 0xfffc);
- if (ret)
- goto unlock;
- }
-
- /* Wait for transmit queues to drain. */
- usleep_range(2000, 4000);
-
- /* If there is a gpio connected to the reset pin, toggle it */
- if (gpiod) {
- gpiod_set_value_cansleep(gpiod, 1);
- usleep_range(10000, 20000);
- gpiod_set_value_cansleep(gpiod, 0);
- usleep_range(10000, 20000);
- }
-
- /* Reset the switch. Keep the PPU active if requested. The PPU
- * needs to be active to support indirect phy register access
- * through global registers 0x18 and 0x19.
- */
- if (ppu_active)
- ret = _mv88e6xxx_reg_write(ps, REG_GLOBAL, 0x04, 0xc000);
- else
- ret = _mv88e6xxx_reg_write(ps, REG_GLOBAL, 0x04, 0xc400);
- if (ret)
- goto unlock;
-
- /* Wait up to one second for reset to complete. */
- timeout = jiffies + 1 * HZ;
- while (time_before(jiffies, timeout)) {
- ret = _mv88e6xxx_reg_read(ps, REG_GLOBAL, 0x00);
- if (ret < 0)
- goto unlock;
-
- if ((ret & is_reset) == is_reset)
- break;
- usleep_range(1000, 2000);
- }
- if (time_after(jiffies, timeout))
- ret = -ETIMEDOUT;
- else
- ret = 0;
-unlock:
- mutex_unlock(&ps->smi_mutex);
-
- return ret;
-}
-
int mv88e6xxx_phy_page_read(struct dsa_switch *ds, int port, int page, int reg)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index 192292f..efd6ebd 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -374,6 +374,7 @@ enum mv88e6xxx_cap {
* See GLOBAL_CONTROL_PPU_ENABLE and GLOBAL_STATUS_PPU_POLLING.
*/
MV88E6XXX_CAP_PPU,
+ MV88E6XXX_CAP_PPU_ACTIVE,
/* SMI PHY Command and Data registers.
* This requires an indirect access to PHY registers through
@@ -412,6 +413,7 @@ enum mv88e6xxx_cap {
#define MV88E6XXX_FLAG_EEPROM BIT(MV88E6XXX_CAP_EEPROM)
#define MV88E6XXX_FLAG_PORTSTATE BIT(MV88E6XXX_CAP_PORTSTATE)
#define MV88E6XXX_FLAG_PPU BIT(MV88E6XXX_CAP_PPU)
+#define MV88E6XXX_FLAG_PPU_ACTIVE BIT(MV88E6XXX_CAP_PPU_ACTIVE)
#define MV88E6XXX_FLAG_SMI_PHY BIT(MV88E6XXX_CAP_SMI_PHY)
#define MV88E6XXX_FLAG_SWITCH_MAC BIT(MV88E6XXX_CAP_SWITCH_MAC_WOL_WOF)
#define MV88E6XXX_FLAG_TEMP BIT(MV88E6XXX_CAP_TEMP)
@@ -446,6 +448,7 @@ enum mv88e6xxx_cap {
MV88E6XXX_FLAG_EEE | \
MV88E6XXX_FLAG_EEPROM | \
MV88E6XXX_FLAG_PORTSTATE | \
+ MV88E6XXX_FLAG_PPU_ACTIVE | \
MV88E6XXX_FLAG_SMI_PHY | \
MV88E6XXX_FLAG_SWITCH_MAC | \
MV88E6XXX_FLAG_TEMP | \
@@ -456,6 +459,7 @@ enum mv88e6xxx_cap {
#define MV88E6XXX_FLAGS_FAMILY_6351 \
(MV88E6XXX_FLAG_ATU | \
MV88E6XXX_FLAG_PORTSTATE | \
+ MV88E6XXX_FLAG_PPU_ACTIVE | \
MV88E6XXX_FLAG_SMI_PHY | \
MV88E6XXX_FLAG_SWITCH_MAC | \
MV88E6XXX_FLAG_TEMP | \
@@ -467,6 +471,7 @@ enum mv88e6xxx_cap {
MV88E6XXX_FLAG_EEE | \
MV88E6XXX_FLAG_EEPROM | \
MV88E6XXX_FLAG_PORTSTATE | \
+ MV88E6XXX_FLAG_PPU_ACTIVE | \
MV88E6XXX_FLAG_SMI_PHY | \
MV88E6XXX_FLAG_SWITCH_MAC | \
MV88E6XXX_FLAG_TEMP | \
@@ -578,7 +583,6 @@ static inline bool mv88e6xxx_has(struct mv88e6xxx_priv_state *ps,
return (ps->info->flags & flags) == flags;
}
-int mv88e6xxx_switch_reset(struct mv88e6xxx_priv_state *ps, bool ppu_active);
const char *mv88e6xxx_drv_probe(struct device *dsa_dev, struct device *host_dev,
int sw_addr, void **priv,
const struct mv88e6xxx_info *table,
--
2.8.2
Powered by blists - more mailing lists