netdev - Re: [PATCH net-next 5/7] Driver: Vmxnet3: Add support for get_coalesce, set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 09 May 2016 01:17:20 +0100
From:	Ben Hutchings <ben@...adent.org.uk>
To:	Shrikrishna Khare <skhare@...are.com>
Cc:	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	pv-drivers@...are.com, Keyong Sun <sunk@...are.com>,
	Manoj Tammali <tammalim@...are.com>
Subject: Re: [PATCH net-next 5/7] Driver: Vmxnet3: Add support for
 get_coalesce, set_coalesce ethtool operations

On Sun, 2016-05-08 at 13:55 -0700, Shrikrishna Khare wrote:
> 
> On Sat, 7 May 2016, Ben Hutchings wrote:
> 
> > On Fri, 2016-05-06 at 16:12 -0700, Shrikrishna Khare wrote:
> > [...]
> > > +static int
> > > +vmxnet3_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec)
> > > +{
> > [...]
> > > +   switch (ec->rx_coalesce_usecs) {
> > > +   case VMXNET3_COALESCE_DEFAULT:
> > > +   case VMXNET3_COALESCE_DISABLED:
> > > +   case VMXNET3_COALESCE_ADAPT:
> > > +           if (ec->tx_max_coalesced_frames ||
> > > +               ec->tx_max_coalesced_frames_irq ||
> > > +               ec->rx_max_coalesced_frames_irq) {
> > > +                   return -EINVAL;
> > > +           }
> > > +           memset(adapter->coal_conf, 0, sizeof(*adapter->coal_conf));
> > > +           adapter->coal_conf->coalMode = ec->rx_coalesce_usecs;
> > > +           break;
> > > +   case VMXNET3_COALESCE_STATIC:
> > [...]
> > 
> > I don't want to see drivers introducing magic values for fields that
> > are denominated in microseconds (especially not for 0, which is the
> > correct way to specify 'no coalescing').  If the current
> > ethtool_coalesce structure is inadequate, propose an extension.
> 
> For vmxnet3, we need an ethtool mechanism to indicate coalescing mode to 
> the device.
> 
> Would a patch that maps 0 to 'no coalescing' be acceptable? That is:
> 
> rx-usecs = 0 -> coalescing disabled.
> rx-usecs = 1 -> default (chosen by the device).
> rx-usecs = 2 -> adaptive coalescing.
> rx-usecs = 3 -> static coalescing.

I still don't like it much.  For the 3 special values (0 isn't really
special):

1 = default: When the driver sets the virtual device to this mode, can it then read back what the actual settings are, or are they hidden?  If it can, then userland can also read the defaults and explicitly return to them later.  But I do see the usefulness of an explicit request to reset to defaults.

2 = adaptive coalescing: There are already fields to request adaptive coalescing; you should support them.

3 = static coalescing: I don't understand what this means.

> all other rx-usecs values -> rate based coalescing where rx-usecs denotes 
> rate.
> 
> Alternatively: I don't think new members could be added to struct 
> ethtool_coalesce without breaking compatibility.

That's right, unfortunately.

> Thus, I could extend coalescing as follows:
> - new struct ethtool_coalesce_v2 with coalesce_mode (along with all the 
> members of struct ethtool_coalesce).
> - introduce new ETHTOOL_{G,S}COALESCE_V2 commands.
> - extend userspace ethtool to invoke new commands.
> 
> Could you please advice?

That's roughly how you would extend it.  Though we would probably want
to consider making other extensions to interrupt coalescing control at
the same time.

Ben.

>  
Ben Hutchings
If you seem to know what you are doing, you'll be given more to do.
Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)