| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1462973785-32532-12-git-send-email-Yuval.Mintz@qlogic.com>
Date: Wed, 11 May 2016 16:36:22 +0300
From: Yuval Mintz <Yuval.Mintz@...gic.com>
To: <davem@...emloft.net>, <netdev@...r.kernel.org>
CC: <Ariel.Elior@...gic.com>, Yuval Mintz <Yuval.Mintz@...gic.com>
Subject: [PATCH net-next v2 11/14] qed*: IOV link control
This adds support in 2 ndo that allow PF to tweak the VF's view of the
link - `ndo_set_vf_link_state' to allow it a view independent of the PF's,
and `ndo_set_vf_rate' which would allow the PF to limit the VF speed.
Signed-off-by: Yuval Mintz <Yuval.Mintz@...gic.com>
---
drivers/net/ethernet/qlogic/qed/qed.h | 2 +
drivers/net/ethernet/qlogic/qed/qed_dev.c | 76 +++++++++++++
drivers/net/ethernet/qlogic/qed/qed_sriov.c | 164 +++++++++++++++++++++++++++
drivers/net/ethernet/qlogic/qed/qed_sriov.h | 6 +
drivers/net/ethernet/qlogic/qede/qede_main.c | 26 +++++
include/linux/qed/qed_iov_if.h | 6 +
6 files changed, 280 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qed/qed.h b/drivers/net/ethernet/qlogic/qed/qed.h
index d7da645..77323fc 100644
--- a/drivers/net/ethernet/qlogic/qed/qed.h
+++ b/drivers/net/ethernet/qlogic/qed/qed.h
@@ -554,8 +554,10 @@ static inline u8 qed_concrete_to_sw_fid(struct qed_dev *cdev,
#define PURE_LB_TC 8
+int qed_configure_vport_wfq(struct qed_dev *cdev, u16 vp_id, u32 rate);
void qed_configure_vp_wfq_on_link_change(struct qed_dev *cdev, u32 min_pf_rate);
+void qed_clean_wfq_db(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt);
#define QED_LEADING_HWFN(dev) (&dev->hwfns[0])
/* Other Linux specific common definitions */
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index e75e73a..acaa286 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -1889,6 +1889,32 @@ static int qed_init_wfq_param(struct qed_hwfn *p_hwfn,
return 0;
}
+static int __qed_configure_vport_wfq(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt, u16 vp_id, u32 rate)
+{
+ struct qed_mcp_link_state *p_link;
+ int rc = 0;
+
+ p_link = &p_hwfn->cdev->hwfns[0].mcp_info->link_output;
+
+ if (!p_link->min_pf_rate) {
+ p_hwfn->qm_info.wfq_data[vp_id].min_speed = rate;
+ p_hwfn->qm_info.wfq_data[vp_id].configured = true;
+ return rc;
+ }
+
+ rc = qed_init_wfq_param(p_hwfn, vp_id, rate, p_link->min_pf_rate);
+
+ if (rc == 0)
+ qed_configure_wfq_for_all_vports(p_hwfn, p_ptt,
+ p_link->min_pf_rate);
+ else
+ DP_NOTICE(p_hwfn,
+ "Validation failed while configuring min rate\n");
+
+ return rc;
+}
+
static int __qed_configure_vp_wfq_on_link_change(struct qed_hwfn *p_hwfn,
struct qed_ptt *p_ptt,
u32 min_pf_rate)
@@ -1923,6 +1949,42 @@ static int __qed_configure_vp_wfq_on_link_change(struct qed_hwfn *p_hwfn,
return rc;
}
+/* Main API for qed clients to configure vport min rate.
+ * vp_id - vport id in PF Range[0 - (total_num_vports_per_pf - 1)]
+ * rate - Speed in Mbps needs to be assigned to a given vport.
+ */
+int qed_configure_vport_wfq(struct qed_dev *cdev, u16 vp_id, u32 rate)
+{
+ int i, rc = -EINVAL;
+
+ /* Currently not supported; Might change in future */
+ if (cdev->num_hwfns > 1) {
+ DP_NOTICE(cdev,
+ "WFQ configuration is not supported for this device\n");
+ return rc;
+ }
+
+ for_each_hwfn(cdev, i) {
+ struct qed_hwfn *p_hwfn = &cdev->hwfns[i];
+ struct qed_ptt *p_ptt;
+
+ p_ptt = qed_ptt_acquire(p_hwfn);
+ if (!p_ptt)
+ return -EBUSY;
+
+ rc = __qed_configure_vport_wfq(p_hwfn, p_ptt, vp_id, rate);
+
+ if (!rc) {
+ qed_ptt_release(p_hwfn, p_ptt);
+ return rc;
+ }
+
+ qed_ptt_release(p_hwfn, p_ptt);
+ }
+
+ return rc;
+}
+
/* API to configure WFQ from mcp link change */
void qed_configure_vp_wfq_on_link_change(struct qed_dev *cdev, u32 min_pf_rate)
{
@@ -2069,3 +2131,17 @@ int qed_configure_pf_min_bandwidth(struct qed_dev *cdev, u8 min_bw)
return rc;
}
+
+void qed_clean_wfq_db(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
+{
+ struct qed_mcp_link_state *p_link;
+
+ p_link = &p_hwfn->mcp_info->link_output;
+
+ if (p_link->min_pf_rate)
+ qed_disable_wfq_for_all_vports(p_hwfn, p_ptt,
+ p_link->min_pf_rate);
+
+ memset(p_hwfn->qm_info.wfq_data, 0,
+ sizeof(*p_hwfn->qm_info.wfq_data) * p_hwfn->qm_info.num_vports);
+}
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index c1b7919..c9a3bb6 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -2822,6 +2822,46 @@ u16 qed_iov_bulletin_get_forced_vlan(struct qed_hwfn *p_hwfn, u16 rel_vf_id)
return p_vf->bulletin.p_virt->pvid;
}
+static int qed_iov_configure_tx_rate(struct qed_hwfn *p_hwfn,
+ struct qed_ptt *p_ptt, int vfid, int val)
+{
+ struct qed_vf_info *vf;
+ u8 abs_vp_id = 0;
+ int rc;
+
+ vf = qed_iov_get_vf_info(p_hwfn, (u16)vfid, true);
+ if (!vf)
+ return -EINVAL;
+
+ rc = qed_fw_vport(p_hwfn, vf->vport_id, &abs_vp_id);
+ if (rc)
+ return rc;
+
+ return qed_init_vport_rl(p_hwfn, p_ptt, abs_vp_id, (u32)val);
+}
+
+int qed_iov_configure_min_tx_rate(struct qed_dev *cdev, int vfid, u32 rate)
+{
+ struct qed_vf_info *vf;
+ u8 vport_id;
+ int i;
+
+ for_each_hwfn(cdev, i) {
+ struct qed_hwfn *p_hwfn = &cdev->hwfns[i];
+
+ if (!qed_iov_pf_sanity_check(p_hwfn, vfid)) {
+ DP_NOTICE(p_hwfn,
+ "SR-IOV sanity check failed, can't set min rate\n");
+ return -EINVAL;
+ }
+ }
+
+ vf = qed_iov_get_vf_info(QED_LEADING_HWFN(cdev), (u16)vfid, true);
+ vport_id = vf->vport_id;
+
+ return qed_configure_vport_wfq(cdev, vport_id, rate);
+}
+
/**
* qed_schedule_iov - schedules IOV task for VF and PF
* @hwfn: hardware function pointer
@@ -2871,6 +2911,9 @@ int qed_sriov_disable(struct qed_dev *cdev, bool pci_enabled)
return -EBUSY;
}
+ /* Clean WFQ db and configure equal weight for all vports */
+ qed_clean_wfq_db(hwfn, ptt);
+
qed_for_each_vf(hwfn, j) {
int k;
@@ -3047,17 +3090,136 @@ void qed_inform_vf_link_state(struct qed_hwfn *hwfn)
/* Update bulletin of all future possible VFs with link configuration */
for (i = 0; i < hwfn->cdev->p_iov_info->total_vfs; i++) {
+ struct qed_public_vf_info *vf_info;
+
+ vf_info = qed_iov_get_public_vf_info(hwfn, i, false);
+ if (!vf_info)
+ continue;
+
memcpy(¶ms, qed_mcp_get_link_params(hwfn), sizeof(params));
memcpy(&link, qed_mcp_get_link_state(hwfn), sizeof(link));
memcpy(&caps, qed_mcp_get_link_capabilities(hwfn),
sizeof(caps));
+ /* Modify link according to the VF's configured link state */
+ switch (vf_info->link_state) {
+ case IFLA_VF_LINK_STATE_DISABLE:
+ link.link_up = false;
+ break;
+ case IFLA_VF_LINK_STATE_ENABLE:
+ link.link_up = true;
+ /* Set speed according to maximum supported by HW.
+ * that is 40G for regular devices and 100G for CMT
+ * mode devices.
+ */
+ link.speed = (hwfn->cdev->num_hwfns > 1) ?
+ 100000 : 40000;
+ default:
+ /* In auto mode pass PF link image to VF */
+ break;
+ }
+
+ if (link.link_up && vf_info->tx_rate) {
+ struct qed_ptt *ptt;
+ int rate;
+
+ rate = min_t(int, vf_info->tx_rate, link.speed);
+
+ ptt = qed_ptt_acquire(hwfn);
+ if (!ptt) {
+ DP_NOTICE(hwfn, "Failed to acquire PTT\n");
+ return;
+ }
+
+ if (!qed_iov_configure_tx_rate(hwfn, ptt, i, rate)) {
+ vf_info->tx_rate = rate;
+ link.speed = rate;
+ }
+
+ qed_ptt_release(hwfn, ptt);
+ }
+
qed_iov_set_link(hwfn, i, ¶ms, &link, &caps);
}
qed_schedule_iov(hwfn, QED_IOV_WQ_BULLETIN_UPDATE_FLAG);
}
+static int qed_set_vf_link_state(struct qed_dev *cdev,
+ int vf_id, int link_state)
+{
+ int i;
+
+ /* Sanitize request */
+ if (IS_VF(cdev))
+ return -EINVAL;
+
+ if (!qed_iov_is_valid_vfid(&cdev->hwfns[0], vf_id, true)) {
+ DP_VERBOSE(cdev, QED_MSG_IOV,
+ "VF index [%d] isn't active\n", vf_id);
+ return -EINVAL;
+ }
+
+ /* Handle configuration of link state */
+ for_each_hwfn(cdev, i) {
+ struct qed_hwfn *hwfn = &cdev->hwfns[i];
+ struct qed_public_vf_info *vf;
+
+ vf = qed_iov_get_public_vf_info(hwfn, vf_id, true);
+ if (!vf)
+ continue;
+
+ if (vf->link_state == link_state)
+ continue;
+
+ vf->link_state = link_state;
+ qed_inform_vf_link_state(&cdev->hwfns[i]);
+ }
+
+ return 0;
+}
+
+static int qed_configure_max_vf_rate(struct qed_dev *cdev, int vfid, int rate)
+{
+ int i;
+
+ for_each_hwfn(cdev, i) {
+ struct qed_hwfn *p_hwfn = &cdev->hwfns[i];
+ struct qed_public_vf_info *vf;
+
+ if (!qed_iov_pf_sanity_check(p_hwfn, vfid)) {
+ DP_NOTICE(p_hwfn,
+ "SR-IOV sanity check failed, can't set tx rate\n");
+ return -EINVAL;
+ }
+
+ vf = qed_iov_get_public_vf_info(p_hwfn, vfid, true);
+
+ vf->tx_rate = rate;
+
+ qed_inform_vf_link_state(p_hwfn);
+ }
+
+ return 0;
+}
+
+static int qed_set_vf_rate(struct qed_dev *cdev,
+ int vfid, u32 min_rate, u32 max_rate)
+{
+ int rc_min = 0, rc_max = 0;
+
+ if (max_rate)
+ rc_max = qed_configure_max_vf_rate(cdev, vfid, max_rate);
+
+ if (min_rate)
+ rc_min = qed_iov_configure_min_tx_rate(cdev, vfid, min_rate);
+
+ if (rc_max | rc_min)
+ return -EINVAL;
+
+ return 0;
+}
+
static void qed_handle_vf_msg(struct qed_hwfn *hwfn)
{
u64 events[QED_VF_ARRAY_LENGTH];
@@ -3254,4 +3416,6 @@ const struct qed_iov_hv_ops qed_iov_ops_pass = {
.configure = &qed_sriov_configure,
.set_mac = &qed_sriov_pf_set_mac,
.set_vlan = &qed_sriov_pf_set_vlan,
+ .set_link_state = &qed_set_vf_link_state,
+ .set_rate = &qed_set_vf_rate,
};
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.h b/drivers/net/ethernet/qlogic/qed/qed_sriov.h
index e38ea98..ab3d291 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.h
@@ -46,6 +46,12 @@ struct qed_public_vf_info {
u8 forced_mac[ETH_ALEN];
u16 forced_vlan;
u8 mac[ETH_ALEN];
+
+ /* IFLA_VF_LINK_STATE_<X> */
+ int link_state;
+
+ /* Currently configured Tx rate in MB/sec. 0 if unconfigured */
+ int tx_rate;
};
/* This struct is part of qed_dev and contains data relevant to all hwfns;
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index aa2cc49..e702aba 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -1792,6 +1792,28 @@ static struct rtnl_link_stats64 *qede_get_stats64(
return stats;
}
+#ifdef CONFIG_QED_SRIOV
+static int qede_set_vf_rate(struct net_device *dev, int vfidx,
+ int min_tx_rate, int max_tx_rate)
+{
+ struct qede_dev *edev = netdev_priv(dev);
+
+ return edev->ops->iov->set_rate(edev->cdev, vfidx, max_tx_rate,
+ max_tx_rate);
+}
+
+static int qede_set_vf_link_state(struct net_device *dev, int vfidx,
+ int link_state)
+{
+ struct qede_dev *edev = netdev_priv(dev);
+
+ if (!edev->ops)
+ return -EINVAL;
+
+ return edev->ops->iov->set_link_state(edev->cdev, vfidx, link_state);
+}
+#endif
+
static void qede_config_accept_any_vlan(struct qede_dev *edev, bool action)
{
struct qed_update_vport_params params;
@@ -2118,6 +2140,10 @@ static const struct net_device_ops qede_netdev_ops = {
.ndo_vlan_rx_add_vid = qede_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = qede_vlan_rx_kill_vid,
.ndo_get_stats64 = qede_get_stats64,
+#ifdef CONFIG_QED_SRIOV
+ .ndo_set_vf_link_state = qede_set_vf_link_state,
+ .ndo_set_vf_rate = qede_set_vf_rate,
+#endif
#ifdef CONFIG_QEDE_VXLAN
.ndo_add_vxlan_port = qede_add_vxlan_port,
.ndo_del_vxlan_port = qede_del_vxlan_port,
diff --git a/include/linux/qed/qed_iov_if.h b/include/linux/qed/qed_iov_if.h
index 7a67fbf..f364f2b 100644
--- a/include/linux/qed/qed_iov_if.h
+++ b/include/linux/qed/qed_iov_if.h
@@ -18,6 +18,12 @@ struct qed_iov_hv_ops {
int (*set_mac) (struct qed_dev *cdev, u8 *mac, int vfid);
int (*set_vlan) (struct qed_dev *cdev, u16 vid, int vfid);
+
+ int (*set_link_state) (struct qed_dev *cdev, int vf_id,
+ int link_state);
+
+ int (*set_rate) (struct qed_dev *cdev, int vfid,
+ u32 min_rate, u32 max_rate);
};
#endif
--
1.9.3
Powered by blists - more mailing lists