netdev - [net-next 01/14] e1000e: fix ethtool autoneg off for non-copper

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1463183035-31888-2-git-send-email-jeffrey.t.kirsher@intel.com>
Date:	Fri, 13 May 2016 16:43:42 -0700
From:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:	davem@...emloft.net
Cc:	Steve Shih <sshih@...co.com>, netdev@...r.kernel.org,
	nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
	xe-kernel@...ernal.cisco.com, Daniel Walker <dwalker@...o99.com>,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 01/14] e1000e: fix ethtool autoneg off for non-copper

From: Steve Shih <sshih@...co.com>

This patch fixes the issues for disabling auto-negotiation and forcing
speed and duplex settings for the non-copper media.

For non-copper media, e1000_get_settings should return ETH_TP_MDI_INVALID for
eth_tp_mdix_ctrl instead of ETH_TP_MDI_AUTO so subsequent e1000_set_settings
call would not fail with -EOPNOTSUPP.

e1000_set_spd_dplx should not automatically turn autoneg back on for forced
1000 Mbps full duplex settings for non-copper media.

Cc: xe-kernel@...ernal.cisco.com
Cc: Daniel Walker <dwalker@...o99.com>
Signed-off-by: Steve Shih <sshih@...co.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/e1000e/ethtool.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 1e3973a..83a815b 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -201,6 +201,9 @@ static int e1000_get_settings(struct net_device *netdev,
 	else
 		ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
 
+	if (hw->phy.media_type != e1000_media_type_copper)
+		ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_INVALID;
+
 	return 0;
 }
 
@@ -236,8 +239,13 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
 		mac->forced_speed_duplex = ADVERTISE_100_FULL;
 		break;
 	case SPEED_1000 + DUPLEX_FULL:
-		mac->autoneg = 1;
-		adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
+		if (adapter->hw.phy.media_type == e1000_media_type_copper) {
+			mac->autoneg = 1;
+			adapter->hw.phy.autoneg_advertised =
+				ADVERTISE_1000_FULL;
+		} else {
+			mac->forced_speed_duplex = ADVERTISE_1000_FULL;
+		}
 		break;
 	case SPEED_1000 + DUPLEX_HALF:	/* not supported */
 	default:
-- 
2.5.5