Message-ID: <CACiydbJWY7xK1tj1Q-umdSNkTy9V+HYQ6SeOxihMASwr1zcApg@mail.gmail.com>
Date:	Mon, 16 May 2016 11:14:44 +0300
From:	Roman Yeryomin <leroi.lists@...il.com>
To:	Rajkumar Manoharan <rmanohar@...eaurora.org>,
	Michal Kazior <michal.kazior@...to.com>
Cc:	Jesper Dangaard Brouer <brouer@...hat.com>,
	Felix Fietkau <nbd@....name>,
	Jonathan Morton <chromatix99@...il.com>,
	"codel@...ts.bufferbloat.net" <codel@...ts.bufferbloat.net>,
	ath10k <ath10k@...ts.infradead.org>,
	make-wifi-fast@...ts.bufferbloat.net,
	Rafał Miłecki <zajec5@...il.com>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	OpenWrt Development List <openwrt-devel@...ts.openwrt.org>,
	Dave Taht <dave.taht@...il.com>
Subject: Re: OpenWRT wrong adjustment of fq_codel defaults (Was: [Codel]
 fq_codel_drop vs a udp flood)

On 16 May 2016 at 01:34, Roman Yeryomin <leroi.lists@...il.com> wrote:
> On 6 May 2016 at 22:43, Dave Taht <dave.taht@...il.com> wrote:
>> On Fri, May 6, 2016 at 11:56 AM, Roman Yeryomin <leroi.lists@...il.com> wrote:
>>> On 6 May 2016 at 21:43, Roman Yeryomin <leroi.lists@...il.com> wrote:
>>>> On 6 May 2016 at 15:47, Jesper Dangaard Brouer <brouer@...hat.com> wrote:
>>>>>
>>>>> I've created a OpenWRT ticket[1] on this issue, as it seems that someone[2]
>>>>> closed Felix'es OpenWRT email account (bad choice! emails bouncing).
>>>>> Sounds like OpenWRT and the LEDE https://www.lede-project.org/ project
>>>>> is in some kind of conflict.
>>>>>
>>>>> OpenWRT ticket [1] https://dev.openwrt.org/ticket/22349
>>>>>
>>>>> [2] http://thread.gmane.org/gmane.comp.embedded.openwrt.devel/40298/focus=40335
>>>>
>>>> OK, so, after porting the patch to 4.1 openwrt kernel and playing a
>>>> bit with fq_codel limits I was able to get 420Mbps UDP like this:
>>>> tc qdisc replace dev wlan0 parent :1 fq_codel flows 16 limit 256
>>>
>>> Forgot to mention, I've reduced drop_batch_size down to 32
>>
>> 0) Not clear to me if that's the right line, there are 4 wifi queues,
>> and the third one
>> is the BE queue.
>
> That was an example, sorry, should have stated that. I've applied same
> settings to all 4 queues.
>
>> That is too low a limit, also, for normal use. And:
>> for the purpose of this particular UDP test, flows 16 is ok, but not
>> ideal.
>
> I played with different combinations, it doesn't make any
> (significant) difference: 20-30Mbps, not more.
> What numbers would you propose?
>
>> 1) What's the tcp number (with a simultaneous ping) with this latest patchset?
>> (I care about tcp performance a lot more than udp floods - surviving a
>> udp flood yes, performance, no)
>
> During the test (both TCP and UDP) it's roughly 5ms in average, not
> running tests ~2ms. Actually I'm now wondering if target is working at
> all, because I had same result with target 80ms..
> So, yes, latency is good, but performance is poor.
>
>> before/after?
>>
>> tc -s qdisc show dev wlan0 during/after results?
>
> during the test:
>
> qdisc mq 0: root
>  Sent 1600496000 bytes 1057194 pkt (dropped 1421568, overlimits 0 requeues 17)
>  backlog 1545794b 1021p requeues 17
> qdisc fq_codel 8001: parent :1 limit 1024p flows 16 quantum 1514
> target 80.0ms ce_threshold 32us interval 100.0ms ecn
>  Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
>  backlog 0b 0p requeues 0
>   maxpacket 0 drop_overlimit 0 new_flow_count 0 ecn_mark 0
>   new_flows_len 0 old_flows_len 0
> qdisc fq_codel 8002: parent :2 limit 1024p flows 16 quantum 1514
> target 80.0ms ce_threshold 32us interval 100.0ms ecn
>  Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
>  backlog 0b 0p requeues 0
>   maxpacket 0 drop_overlimit 0 new_flow_count 0 ecn_mark 0
>   new_flows_len 0 old_flows_len 0
> qdisc fq_codel 8003: parent :3 limit 1024p flows 16 quantum 1514
> target 80.0ms ce_threshold 32us interval 100.0ms ecn
>  Sent 1601271168 bytes 1057706 pkt (dropped 1422304, overlimits 0 requeues 17)
>  backlog 1541252b 1018p requeues 17
>   maxpacket 1514 drop_overlimit 1422304 new_flow_count 35 ecn_mark 0
>   new_flows_len 0 old_flows_len 1
> qdisc fq_codel 8004: parent :4 limit 1024p flows 16 quantum 1514
> target 80.0ms ce_threshold 32us interval 100.0ms ecn
>  Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
>  backlog 0b 0p requeues 0
>   maxpacket 0 drop_overlimit 0 new_flow_count 0 ecn_mark 0
>   new_flows_len 0 old_flows_len 0
>
>
> after the test (60sec):
>
> qdisc mq 0: root
>  Sent 3084996052 bytes 2037744 pkt (dropped 2770176, overlimits 0 requeues 28)
>  backlog 0b 0p requeues 28
> qdisc fq_codel 8001: parent :1 limit 1024p flows 16 quantum 1514
> target 80.0ms ce_threshold 32us interval 100.0ms ecn
>  Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
>  backlog 0b 0p requeues 0
>   maxpacket 0 drop_overlimit 0 new_flow_count 0 ecn_mark 0
>   new_flows_len 0 old_flows_len 0
> qdisc fq_codel 8002: parent :2 limit 1024p flows 16 quantum 1514
> target 80.0ms ce_threshold 32us interval 100.0ms ecn
>  Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
>  backlog 0b 0p requeues 0
>   maxpacket 0 drop_overlimit 0 new_flow_count 0 ecn_mark 0
>   new_flows_len 0 old_flows_len 0
> qdisc fq_codel 8003: parent :3 limit 1024p flows 16 quantum 1514
> target 80.0ms ce_threshold 32us interval 100.0ms ecn
>  Sent 3084996052 bytes 2037744 pkt (dropped 2770176, overlimits 0 requeues 28)
>  backlog 0b 0p requeues 28
>   maxpacket 1514 drop_overlimit 2770176 new_flow_count 64 ecn_mark 0
>   new_flows_len 0 old_flows_len 1
> qdisc fq_codel 8004: parent :4 limit 1024p flows 16 quantum 1514
> target 80.0ms ce_threshold 32us interval 100.0ms ecn
>  Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
>  backlog 0b 0p requeues 0
>   maxpacket 0 drop_overlimit 0 new_flow_count 0 ecn_mark 0
>   new_flows_len 0 old_flows_len 0
>
>
>> IF you are doing builds for the archer c7v2, I can join in on this... (?)
>
> I'm not but I have c7 somewhere, so I can do a build for it and also
> test, so we are on the same page.
>
>> I did do a test of the ath10k "before", fq_codel *never engaged*, and
>> tcp induced latencies under load, e at 100mbit, cracked 600ms, while
>> staying flat (20ms) at 100mbit. (not the same patches you are testing)
>> on x86. I have got tcp 300Mbit out of an osx box, similar latency,
>> have yet to get anything more on anything I currently have
>> before/after patchsets.
>>
>> I'll go add flooding to the tests, I just finished a series comparing
>> two different speed stations and life was good on that.
>>
>> "before" - fq_codel never engages, we see seconds of latency under load.
>>
>> root@...2:~# tc -s qdisc show dev wlp4s0
>> qdisc mq 0: root
>>  Sent 8570563893 bytes 6326983 pkt (dropped 0, overlimits 0 requeues 0)
>>  backlog 0b 0p requeues 0
>> qdisc fq_codel 0: parent :1 limit 10240p flows 1024 quantum 1514
>> target 5.0ms interval 100.0ms ecn
>>  Sent 2262 bytes 17 pkt (dropped 0, overlimits 0 requeues 0)
>>  backlog 0b 0p requeues 0
>>   maxpacket 0 drop_overlimit 0 new_flow_count 0 ecn_mark 0
>>   new_flows_len 0 old_flows_len 0
>> qdisc fq_codel 0: parent :2 limit 10240p flows 1024 quantum 1514
>> target 5.0ms interval 100.0ms ecn
>>  Sent 220486569 bytes 152058 pkt (dropped 0, overlimits 0 requeues 0)
>>  backlog 0b 0p requeues 0
>>   maxpacket 18168 drop_overlimit 0 new_flow_count 1 ecn_mark 0
>>   new_flows_len 0 old_flows_len 1
>> qdisc fq_codel 0: parent :3 limit 10240p flows 1024 quantum 1514
>> target 5.0ms interval 100.0ms ecn
>>  Sent 8340546509 bytes 6163431 pkt (dropped 0, overlimits 0 requeues 0)
>>  backlog 0b 0p requeues 0
>>   maxpacket 68130 drop_overlimit 0 new_flow_count 120050 ecn_mark 0
>>   new_flows_len 1 old_flows_len 3
>> qdisc fq_codel 0: parent :4 limit 10240p flows 1024 quantum 1514
>> target 5.0ms interval 100.0ms ecn
>>  Sent 9528553 bytes 11477 pkt (dropped 0, overlimits 0 requeues 0)
>>  backlog 0b 0p requeues 0
>>   maxpacket 66 drop_overlimit 0 new_flow_count 1 ecn_mark 0
>>   new_flows_len 1 old_flows_len 0
>>   ```
>>
>>
>>>> This is certainly better than 30Mbps but still more than two times
>>>> less than before (900).
>>
>> The number that I still am not sure we got is that you were sending
>> 900mbit udp and recieving 900mbit on the prior tests?
>
> 900 was sending, AP POV (wifi client is downloading)
>
>>>> TCP also improved a little (550 to ~590).
>>
>> The limit is probably a bit low, also.  You might want to try target
>> 20ms as well.
>
> I've tried limit up to 1024 and target up to 80ms
>
>>>>
>>>> Felix, others, do you want to see the ported patch, maybe I did something wrong?
>>>> Doesn't look like it will save ath10k from performance regression.
>>
>> what was tcp "before"? (I'm sorry, such a long thread)
>
> 750Mbps

Michal, after retesting with your patch (sorry, it was late yesterday,
confused compat-wireless archives) I saw the difference.
So the progress looks like this (all with fq_codel flows 16 limit 1024
target 20ms):
no patches: 380Mbps UDP, 550 TCP
Eric's (fq_codel drop) patch: 420Mbps UDP, 590 TCP (+40Mbps), latency
5-6ms during test
Michal's (improve tx scheduling) patch: 580Mbps UDP, 660 TCP, latency
up to 30-40ms during test
after Rajkumar's proposal to "try without registering wake_tx_queue
callback": 820Mbps UDP, 690 TCP.

So, very close to "as before": 900Mbps UDP, 750 TCP.
But still, I was expecting performance improvements from latest ath10k
code, not regressions.
I know that hw is capable of 800Mbps TCP, which I'm targeting.

Regards,
Roman

p.s. sorry for confusion

Powered by blists - more mailing lists