netdev - Re: [PATCH] phy: add support for a reset-gpio specification

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 16 May 2016 10:33:59 -0500
From:	Rob Herring <robh@...nel.org>
To:	Uwe Kleine-König 
	<u.kleine-koenig@...gutronix.de>
Cc:	netdev@...r.kernel.org, devicetree@...r.kernel.org,
	Florian Fainelli <f.fainelli@...il.com>, kernel@...gutronix.de,
	"Andrew F . Davis" <afd@...com>, Nishanth Menon <nm@...com>
Subject: Re: [PATCH] phy: add support for a reset-gpio specification

On Thu, May 12, 2016 at 12:00:33PM +0200, Uwe Kleine-König wrote:
> The framework only asserts (for now) that the reset gpio is not active.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
> ---
>  Documentation/devicetree/bindings/net/phy.txt | 3 +++
>  drivers/net/phy/phy_device.c                  | 8 ++++++++
>  2 files changed, 11 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
> index bc1c3c8bf8fa..c00a9a894547 100644
> --- a/Documentation/devicetree/bindings/net/phy.txt
> +++ b/Documentation/devicetree/bindings/net/phy.txt
> @@ -35,6 +35,8 @@ Optional Properties:
>  - broken-turn-around: If set, indicates the PHY device does not correctly
>    release the turn around line low at the end of a MDIO transaction.
>  
> +- reset-gpios: Reference to a GPIO used to reset the phy.
> +

And also active mode flag should be specified.

>  Example:
>  
>  ethernet-phy@0 {
> @@ -42,4 +44,5 @@ ethernet-phy@0 {
>  	interrupt-parent = <40000>;
>  	interrupts = <35 1>;
>  	reg = <0>;
> +	reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
>  };
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index e551f3a89cfd..7d666ab47271 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -34,6 +34,7 @@
>  #include <linux/io.h>
>  #include <linux/uaccess.h>
>  #include <linux/of.h>
> +#include <linux/gpio/consumer.h>
>  
>  #include <asm/irq.h>
>  
> @@ -1569,9 +1570,16 @@ static int phy_probe(struct device *dev)
>  	struct device_driver *drv = phydev->mdio.dev.driver;
>  	struct phy_driver *phydrv = to_phy_driver(drv);
>  	int err = 0;
> +	struct gpio_descs *reset_gpios;
>  
>  	phydev->drv = phydrv;
>  
> +	/* take phy out of reset */
> +	reset_gpios = devm_gpiod_get_array_optional(dev, "reset",
> +						    GPIOD_OUT_LOW);
> +	if (IS_ERR(reset_gpios))
> +		return PTR_ERR(reset_gpios);
> +
>  	/* Disable the interrupt if the PHY doesn't support it
>  	 * but the interrupt is still a valid one
>  	 */
> -- 
> 2.8.0.rc3
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html