[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1463568451-9385-1-git-send-email-rabin.vincent@axis.com>
Date: Wed, 18 May 2016 12:47:31 +0200
From: Rabin Vincent <rabin.vincent@...s.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: andrew@...n.ch, f.fainelli@...il.com, netdev@...r.kernel.org,
Rabin Vincent <rabinv@...s.com>
Subject: [PATCHv3] phy: fix crash in fixed_phy_add()
From: Rabin Vincent <rabinv@...s.com>
Since e7f4dc3536a ("mdio: Move allocation of interrupts into core"),
platforms which call fixed_phy_add() before fixed_mdio_bus_init() is
called (for example, because the platform code and the fixed_phy driver
use the same initcall level) crash in fixed_phy_add() since the
->mii_bus is not allocated.
Also since e7f4dc3536a, these interrupts are initalized to polling by
default. The few (old) platforms which directly use fixed_phy_add()
from their platform code all pass PHY_POLL for the irq argument, so we
can keep these platforms not crashing by simply not attempting to set
the irq if PHY_POLL is passed.
Also, even if problems have not been reported on more modern platforms
which used fixed_phy_register() from drivers' probe functions, we return
-EPROBE_DEFER if the MDIO bus is not yet registered so that the probe is
retried later.
Fixes: e7f4dc3536a400 ("mdio: Move allocation of interrupts into core")
Signed-off-by: Rabin Vincent <rabinv@...s.com>
---
v3: One more suggestion from Andrew: check mii bus state
drivers/net/phy/fixed_phy.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c
index fc07a88..e7dcda6 100644
--- a/drivers/net/phy/fixed_phy.c
+++ b/drivers/net/phy/fixed_phy.c
@@ -255,7 +255,8 @@ int fixed_phy_add(unsigned int irq, int phy_addr,
memset(fp->regs, 0xFF, sizeof(fp->regs[0]) * MII_REGS_NUM);
- fmb->mii_bus->irq[phy_addr] = irq;
+ if (irq != PHY_POLL)
+ fmb->mii_bus->irq[phy_addr] = irq;
fp->addr = phy_addr;
fp->status = *status;
@@ -314,6 +315,9 @@ struct phy_device *fixed_phy_register(unsigned int irq,
int phy_addr;
int ret;
+ if (!fmb->mii_bus || fmb->mii_bus->state != MDIOBUS_REGISTERED)
+ return ERR_PTR(-EPROBE_DEFER);
+
/* Get the next available PHY address, up to PHY_MAX_ADDR */
spin_lock(&phy_fixed_addr_lock);
if (phy_fixed_addr == PHY_MAX_ADDR) {
--
2.1.4
Powered by blists - more mailing lists