netdev - Re: [PATCH 1/1 RFC] net/phy: Add Lantiq PHY driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <6103030.g2sqFmaRhG@ws-stein>
Date:	Thu, 19 May 2016 12:21:38 +0200
From:	Alexander Stein <alexander.stein@...tec-electronic.com>
To:	Mathias Kresin <openwrt@...sin.me>
Cc:	John Crispin <john@...ozen.org>,
	Florian Fainelli <f.fainelli@...il.com>,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	andrew@...n.ch, "Mehrtens, Hauke" <hauke.mehrtens@...el.com>
Subject: Re: [PATCH 1/1 RFC] net/phy: Add Lantiq PHY driver

On Thursday 19 May 2016 12:03:10, Mathias Kresin wrote:
> 2016-05-19 9:03 GMT+02:00 John Crispin <john@...ozen.org>:
> > On 19/05/2016 08:57, Alexander Stein wrote:
> >> Thanks for the link, I wasn't aware of that patch. I like it in general,
> >> but there are some things I'd like to get addressed first:
> >> * vr9_gphy_of_reg_init() writes uncoditionally to led3h and led3l even on
> >> 
> >>   PEf7071 which does not have this register at all
> > 
> > we use this driver mainly on the 11g and 22f version. mathias recently
> > added the led3 handling.
> > 
> > @Mathias, can you have a look at this and fix it inside the lede tree ?
> 
> Well, I haven't added the led3 handling, I've only changed the initial
> value (function) of led3.
> 
> Maybe it's cleaner to not use a default value for the led function and
> completely rely on the device tree bindings. But by adjusting the
> initial values, I had to change only the led function of one board in
> the openwrt xrx200 subtarget instead of touching all dts files.

I think setting default values is good.

> I know that the LTQ Datasheet for the PEF 7071 Version 1.5 mentions
> the led3 control register albeit there is no pin for a forth led. So I
> guess it's safe to write to the led3 register even for the PEF 7071.

Mh, my PEF 7071 User Manual (Version 2.0, 2012-10-17) doesn't mention LED3x 
registers. There is LED3DA and LED3EN in PHY_LED but was removed in 1.6 
manual.
I think, some flag if the PHY supports LED3 and depend on that is just fine.

Best regards,
Alexander