[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <573EE8B4.1050701@arm.com>
Date: Fri, 20 May 2016 11:36:36 +0100
From: Marc Zyngier <marc.zyngier@....com>
To: Andre Heider <a.heider@...il.com>,
Giuseppe CAVALLARO <peppe.cavallaro@...com>
Cc: Alexandre Torgue <alexandre.torgue@...com>,
Bert Lindner <bert@....net>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Robin Murphy <robin.murphy@....com>,
Andreas Färber <afaerber@...e.de>,
linux-arm-kernel@...ts.infradead.org,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
linux-sunxi@...glegroups.com
Subject: Re: 4.5.0 on sun7i-a20-olinuxino-lime2: libphy: PHY stmmac-0:ffffffff
not found (regression from rc7)
On 20/05/16 11:30, Andre Heider wrote:
> Hi,
>
> On Fri, May 20, 2016 at 10:14 AM, Giuseppe CAVALLARO
> <peppe.cavallaro@...com> wrote:
>> On 5/20/2016 9:56 AM, Marc Zyngier wrote:
>>>
>>> On 20/05/16 06:44, Andre Heider wrote:
>>>>
>>>> Giuseppe, Alexandre, et al.,
>>>>
>>>> On Thu, Mar 17, 2016 at 8:52 AM, Marc Zyngier <marc.zyngier@....com>
>>>> wrote:
>>>>>
>>>>> On Thu, 17 Mar 2016 00:56:40 +0100
>>>>> Bert Lindner <bert@....net> wrote:
>>>>>>
>>>>>> On 2016-03-16 18:42, Marc Zyngier wrote:
>>>>>>>
>>>>>>> On 16/03/16 15:10, Bert Lindner wrote:
>>>>>>>>
>>>>>>>> On 2016-03-16 14:10, Andreas Färber wrote:
>>>>>>>>>
>>>>>>>>> Am 16.03.2016 um 13:09 schrieb Robin Murphy:
>>>>>>>>>>
>>>>>>>>>> On 16/03/16 11:39, Marc Zyngier wrote:
>>>>>>>>>>>
>>>>>>>>>>> On 16/03/16 11:19, Bert Lindner wrote:
>>>>
>>>> ...
>>>>>>>>>>>>
>>>>>>>>>>>> For the board sun7i-a20-olinuxino-lime2, there seems to be a
>>>>>>>>>>>> problem
>>>>>>>>>>>> with the eth0 PHY in mainline kernel 4.5.0 that developed since
>>>>>>>>>>>> 4.5.0-rc7. Ethernet does not work, although eth0 is reported:
>>>>
>>>> ...
>>>>>>>>>>>>
>>>>>>>>>>>> [ 9.767125] NET: Registered protocol family 10
>>>>>>>>>>>> [ 10.357405] libphy: PHY stmmac-0:ffffffff not found
>>>>>>>>>>>> [ 10.362382] eth0: Could not attach to PHY
>>>>>>>>>>>> [ 10.366557] stmmac_open: Cannot attach to PHY (error: -19)
>>>>
>>>> ...
>>>>>>>>>
>>>>>>>>> v4 fixes for 4.5 are here:
>>>>>>>>>
>>>>>>>>> https://patchwork.ozlabs.org/patch/598195/ (revert)
>>>>>>>>> https://patchwork.ozlabs.org/patch/598196/
>>>>
>>>> ...
>>>>>>>
>>>>>>> Good to know, thanks. Could you also give the potential fix a go (as
>>>>>>> mentioned by Andreas)? Just to make sure that whatever gets merged
>>>>>>> next
>>>>>>> will actually fix the issue.
>>>>>>
>>>>>>
>>>>>> Yes sure, it took a while because I had to travel. Confirmed, the
>>>>>> v4-for-4.5 fix works well for me, on sun7i-a20-olinuxino-lime2:
>>>>>>
>>>>>> root@...e2-079f:~# cat /proc/version
>>>>>> Linux version 4.5.0-598195-598196-v4 (root@...e2-079f) (gcc version
>>>>>> 4.9.1 (Ubuntu/Linaro 4.9.1-16ubuntu6) ) #1 SMP Wed Mar 16 16:44:22 UTC
>>>>>> 2016
>>>>>>
>>>>>> dmesg:
>>>>>> [ 8.245273] NET: Registered protocol family 10
>>>>>> [ 9.297406] RX IPC Checksum Offload disabled
>>>>>> [ 9.297460] No MAC Management Counters available
>>>>>> [ 9.297951] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>>>>>> [ 16.285658] sun7i-dwmac 1c50000.ethernet eth0: Link is Up -
>>>>>> 1Gbps/Full - flow control rx/tx
>>>>>> [ 16.285798] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>>>>>>
>>>>>> The board is connected to my laptop rather than to a switch, so that
>>>>>> might be where the flow control message comes from (not sure). Anyway
>>>>>> ethernet works.
>>>>>
>>>>>
>>>>> Cool, many thanks for taking the time to test and report.
>>>>>
>>>>> Hopefully Giuseppe will get this merged quickly enough in mainline, and
>>>>> it should then trickle into a 4.5-stable release (cc-ing stable on
>>>>> these patches would probably be a good idea, BTW).
>>>>
>>>>
>>>> stmmac is broken on at least Lime2, BananaPi and Cubieboard2 since
>>>> v4.5 [0], including all five stable releases :(
>>>
>>>
>>> All the A20 platforms are dead, actually.
>>>
>>>> The v4.5 patches quoted above are already +4 weeks old, could we
>>>> please get them into stable?
>>>
>>>
>>> For that, the maintainer would have needed to CC stable, which he
>>> didn't. I'd expect someone who cares to send these patches to stable.
>>> It'd be better if the maintainer would do it himself though.
>>
>>
>> sure, I can send the patches to stable (sorry if I missed to add
>> stable ML on CC).
>>
>> Andre, I have not clear if the train of patches actually fix the
>> issue or if you need my support to fix something else. In that case
>> I need some input for debugging (e.g. kernel log).
>
> Bert already confirmed that those two patches fixes stmmac on his
> Lime2, so I assume that it fixes the issue for all A20 platforms.
>
>> let me know, is it enough to re-send the patches only?
>
> Just a resend with cc:stable :)
Not quite. Please read Documentation/stable_kernel_rules.txt, and the
section that concerns networking patches (and then consult
Documentation/networking/netdev-FAQ.txt which has all the details).
Thanks,
M.
--
Jazz is not dead. It just smells funny...
Powered by blists - more mailing lists