[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1464249684-976-3-git-send-email-Yuval.Mintz@qlogic.com>
Date: Thu, 26 May 2016 11:01:18 +0300
From: Yuval Mintz <Yuval.Mintz@...gic.com>
To: <davem@...emloft.net>, <netdev@...r.kernel.org>
CC: Yuval Mintz <Yuval.Mintz@...gic.com>
Subject: [PATCH net 2/8] qede: Reload on GRO changes
Since driver is using a FW-based GRO implementation, this has some
effects on its ability to cope with GRO enablement/disablement.
As a result, driver must perform an inner-reload as a result of a state
change in the offload configuration of said feature.
[Failure to do so means network stack would continue to receive
aggregated packets even though user requested the feature to be disabled].
Signed-off-by: Yuval Mintz <Yuval.Mintz@...gic.com>
---
drivers/net/ethernet/qlogic/qede/qede_main.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 3bb1428..5d00d14 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -2091,6 +2091,29 @@ static void qede_vlan_mark_nonconfigured(struct qede_dev *edev)
edev->accept_any_vlan = false;
}
+int qede_set_features(struct net_device *dev, netdev_features_t features)
+{
+ struct qede_dev *edev = netdev_priv(dev);
+ netdev_features_t changes = features ^ dev->features;
+ bool need_reload = false;
+
+ /* No action needed if hardware GRO is disabled during driver load */
+ if (changes & NETIF_F_GRO) {
+ if (dev->features & NETIF_F_GRO)
+ need_reload = !edev->gro_disable;
+ else
+ need_reload = edev->gro_disable;
+ }
+
+ if (need_reload && netif_running(edev->ndev)) {
+ dev->features = features;
+ qede_reload(edev, NULL, NULL);
+ return 1;
+ }
+
+ return 0;
+}
+
#ifdef CONFIG_QEDE_VXLAN
static void qede_add_vxlan_port(struct net_device *dev,
sa_family_t sa_family, __be16 port)
@@ -2175,6 +2198,7 @@ static const struct net_device_ops qede_netdev_ops = {
#endif
.ndo_vlan_rx_add_vid = qede_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = qede_vlan_rx_kill_vid,
+ .ndo_set_features = qede_set_features,
.ndo_get_stats64 = qede_get_stats64,
#ifdef CONFIG_QED_SRIOV
.ndo_set_vf_link_state = qede_set_vf_link_state,
--
1.9.3
Powered by blists - more mailing lists