| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1464249684-976-7-git-send-email-Yuval.Mintz@qlogic.com> Date: Thu, 26 May 2016 11:01:22 +0300 From: Yuval Mintz <Yuval.Mintz@...gic.com> To: <davem@...emloft.net>, <netdev@...r.kernel.org> CC: Yuval Mintz <Yuval.Mintz@...gic.com> Subject: [PATCH net 6/8] qed: Add missing 100g init mode Some of the HW configurations are currently missing for 100g devices. This can cause various classification issues, as well as prevent device from fully reaching line-rate. Signed-off-by: Yuval Mintz <Yuval.Mintz@...gic.com> --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 920eadd..2a7c875 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -588,7 +588,14 @@ static void qed_calc_hw_mode(struct qed_hwfn *p_hwfn) hw_mode |= 1 << MODE_ASIC; + if (p_hwfn->cdev->num_hwfns > 1) + hw_mode |= 1 << MODE_100G; + p_hwfn->hw_info.hw_mode = hw_mode; + + DP_VERBOSE(p_hwfn, (NETIF_MSG_PROBE | NETIF_MSG_IFUP), + "Configuring function for hw_mode: 0x%08x\n", + p_hwfn->hw_info.hw_mode); } /* Init run time data for all PFs on an engine. */ -- 1.9.3
Powered by blists - more mailing lists